| Make | Model | Problem | Solution | Date |
| | | |
| Found: 4551
|
| Philips | ANUBIS-B | How to de-activate "Hotel mode" | Applicable for family: Hotel TV
Identification on uP: CV6012/CV6018/CV6109/109
For AB sets
Hotel Mode de-activation:
------------------------
Dedicated Hotel TV set, so always hotel mode.
Specification of the Hotel mode:
-------------------------------
| 14-09-04 |
| Philips | ANUBIS-B | In TXT mode picture partly blanked and wrong characters | Check IC7700 - SAA5246 P/H (4822 209 31215) or SAA5246 P/E/S
(4822 209 32122).
| 14-09-04 |
|
|
| Philips | ANUBIS-B | In TXT mode. Vertical white pixels instead of characters. | Check IC7700 - SAA5246 P/H (4822 209 31215) or SAA5246 P/E/S
(4822 209 32122).
| 14-09-04 |
| Philips | ANUBIS-B | INSTALL or STORE not possible; sound volume might be too low | Check whether "Hotel Mode" is disabled. To check this, see "Frequently Asked Questions", "How to de-activate "Hotel Mode". | 14-09-04 |
| Philips | ANUBIS-B | Microphonic effect and sound in video. | Change C2267 and C2246 into 100nF X7R type, (4822 122 33496).
Change C2268 into 22nF (4822 126 11544).
Add condensator 2461 1uF 50V (4822 121 51319) instead of jumper
9164.
| 14-09-04 |
| Philips | ANUBIS-B | Microphonic effect and sound in video. | Change C2267 and C2246 into 100nF X7R type, (4822 122 33496).
Change C2268 into 22nF (4822 126 11544).
Add condensator 2461 1uF 50V (4822 121 51319) instead of jumper
9164.
| 14-09-04 |
| Philips | ANUBIS-B | Microphonic sound | Change capacitors 2267 and 2246 to 100nF (4822 122 33496)
Change the value of capacitor 2268 to 22nF (4822 126 11544).
Add capacitor 2461 1uF 50V (4822 121 51319) instead of jumper 9464.
| 14-09-04 |
| Philips | ANUBIS-B | No +5V supply. | Check D6561 (BYD33D; 4822 130 42488)
| 14-09-04 |
| Philips | ANUBIS-B | No colour on first quarter of the picture. | Check sandcastle pulse on pin 5 of IC7290, TDA4661. If incorrect,
especially the DC content, check/replace D6250 - 1N4148
(4822 130 30621).
This diode couples the sandcastle line to the 12 volt line.
| 14-09-04 |
| Philips | ANUBIS-B | No picture | No +163V supply voltage on CRT-PCB.
Check R3470 6R2 (4822 052 10628).
| 14-09-04 |
| Philips | ANUBIS-B | No TXT, error 4. | No +5A supply on TXT pwb.
Check zener diode D6750 (LLZ-F5V6) (4822 130 81227).
| 14-09-04 |
| Philips | ANUBIS-B | No TXT, error 4. | Check X-tal X1701 27Mc (4822 242 81246).
Check C2703 1000pF (4822 122 31746).
| 14-09-04 |
| Philips | ANUBIS-B | Production modification; compensation of sandcastl | Production modification; compensation of sandcastle capacitance
load
---------------------------------------------------------------
On the main carrier changed:
C2455 and C2456 changed into 4p7 (5322 122 33082).
REMARKS :
Introduced in producti | 14-09-04 |
| Philips | ANUBIS-B | Ringing on vertical lines. | Replace L5237 on the CRT panel by a bridge wire 9237.
REMARKS :
Introduced in production from factory code PM009219 and higher.
| 14-09-04 |
| Philips | ANUBIS-B | Supply switches off. | Check L5445 L.O.T. (4822 140 10441).
| 14-09-04 |
| Philips | ANUBIS-B | The error codes for the Anubis B Hotel TV (xxHTxxx | The error codes for the Anubis B Hotel TV (xxHTxxxx/xx) is
not published yet:
For the total overview herewith a table is given for both
the normal Anubis B and the Anubis B Hotel:
Error LED Anubis B Anubis B Hotel
code indi | 14-09-04 |
| Philips | ANUBIS-B | Totally inoperative. | Check:
F1500 2AT (4822 070 32002)
TS7525 2SK1611 (4822 130 63048)
D6502 1N4005GP (4822 130 81497)
IC7500 TDA8385/N2 (4822 209 63735)
R3549 15 Ohm (4822 116 52182)
TS7445 BUT 11AF (4822 130 42679) for 14"- | 14-09-04 |
| Philips | ANUBIS-B | Tuning with system L/L` not optimal. | Change on the IF and synchronisation panel:
C2579 into 47p (4822 122 31772)
C2585 into 6p8 (4822 122 32507)
C2590 into 22p (4822 122 32482).
REMARKS :
Introduced in production from production code PM009222 and higher.
| 14-09-04 |
| Philips | ANUBIS-B | Vertical black bar in picture. | Check C2299 10nF (4822 122 32862).
| 14-09-04 |
| Philips | ANUBIS-B | Vertical deflection is shaky. | Vertical deflection IC7400 is sensitive to temperature.
Replace IC7400 TDA3653B (4822 209 60955).
| 14-09-04 |
| Philips | ANUBIS-S | "Curtain" effect at left side of the screen at dark pictures | It is recommended to adapt in the line drive part of the 25"
Anubis S BB set:
Replace R3453 and R3454 by a 4k7 5% resistor fuse 4822 052 10472
REMARKS :
Introduced in production week 9417
(the seriousness of the effect differs from set to set) | 14-09-04 |
| Philips | ANUBIS-S | After warmup pix shrinks, stamp raster then blackout. | +8V supply to IC 7225 increases.
+8V regulator IC 7218(78M08) no heat sink.
Change the IC 7218 and use a heat sink.
| 14-09-04 |
|
|
| Philips | ANUBIS-S | At NTSC the green colour is a bit yellow / red / orange | An new version of IC7225 will be introduced with a new
NTSC matrix.
This IC7225 is fully backwards compatible with the TDA8362C/N3.
New IC7225 TDA8362E/N2 4822 209 33398
Available from week 9412 onwards
REMARKS :
Introduced in production wee | 14-09-04 |
| Philips | ANUBIS-S | AV input mode | AV input mode
-------------
If it is required that a set stays in AV input mode after switching
on, R3627 (1 K ohm) near microprocessor IC7600 has to be removed.
| 14-09-04 |
| Philips | ANUBIS-S | Bad catching of colour carrier | Replace:
C2275 by 220p (5322 122 32334)
C2277 by 220p (5322 122 32334)
C2278 by 220p (5322 122 32334)
C2279 by 220p (5322 122 32334)
REMARKS :
Introduced in production week 9328
| 14-09-04 |
| Philips | ANUBIS-S | Bad colour switching performance | Replace:
- TS7278 by BF494B (4822 130 41376)
- R3278 by 8k2 (4822 116 52303)
REMARKS :
Introduced in production week 9315
| 14-09-04 |
| Philips | ANUBIS-S | Bad picture geometry | Replace 2447 by 680 pF 2 kV 4822 126 12269
REMARKS :
Introduced in production week 9319
| 14-09-04 |
| Philips | ANUBIS-S | Bad picture sharpness of the 25" Anubis S BB | It is recommended to replace on the CRT panel (diagram EE)
C2304, C2317 and C2330 by 470p 10% 50V 5322 122 32311
R3338, R3339 and R3340 by 22k 5% 0.16W 4822 116 52257
L5306, L5319 and L5328 by 820uH 10% 4822 157 71153
REMARKS :
Intr | 14-09-04 |
| Philips | ANUBIS-S | C2505 discharge to prevent damage of TS7513 | C2505 discharge to prevent damage of TS7513
-------------------------------------------
For all ANUBIS-S sets:
Always switch off the set under repair and discharge the big
rectifier capacitor C2505 (diagram A) with a 1k/5W resistor
(e.g 4822 053 32122) b | 14-09-04 |
| Philips | ANUBIS-S | Codenumber information | Codenumber information
----------------------
LOT for TXT and non TXT sets Anubis S AA & BB & CC
--------------------------------------------------
LOT for Anubis S AA & CC sets:
14-20-21" non TXT sets: 4822 140 10465
14-20-21" TXT sets: 48 | 14-09-04 |