|TDSHT3_Quick_Ref_Card_SinkTest.pdf||Getting Started with TDSHT3 4. The software remotely controls the DTG and AWG, 6. To configure and test the GPIB connection to the DTG,
which must be connected by a National Instruments click Signal Sources. The Signal Sources Setup dialog
You can use this side of the quick reference card to get GPIB-USB-B. To connect the DUT, click Tests > box appears.
started with the Sink Jitter Tolerance test procedure. The Connect.
other side contains a complete menu tree for the TDSHT3
HDMI Compliance Test Software.
NOTE. For additional procedures, refer to the
TDSHT3 Quick Start User Manual. For
complete operating instructions, refer to the
TDSHT3 HDMI Compliance Test Software enables
unprecendented efficiency by providing a comprehensive 5. Make the connections as follows:
range of tests, including Ji|