Text preview for : U-loader_rework_B.pdf part of Philips U-loader rework B Philips Symptom Cure 2006 References U-loader_rework_B.pdf
Back to : U-loader_rework_B.pdf | Home
MCM7,M8 U-loader rework procedure (disassembly) Method B
1. Take out four screws from top panel and then pull out the top panel.
Equipment : Screw driver Torx 10
2.Screw out four screws of left /right panel and then pull out the left/right panel.
Equipment : Screw driver Torx 10
3. Use a stick to press the lock of CD tray and let CD tray out, pull of CD tray, then pull off CD cover
Equipment : stick (about 15-20CM)
4. Open the U-loader assembly fixed screw and disconnect FFC cabel, then take out the U-loader assembly.
Equipment : Screw driver Torx 10
5.use stick press the lock button and pull CD tray out.
Equipment : stick (about 15-20CM)
6. Screw out four pieces of screw from four holes on CD module which mount CD modue with bracket module.
Equipment : Screw driver Torx 10
7. Disconnect the FFC cable and take out The CD module from CD bracket and screw out four of cross-head screw from module.
Equipment : Screw driver (cross head 2.6)
9. Paste Fiber Washer (8241 150 10571) on each screw.
Important: Fiber washer should be concentric with the washer of screw.
Material: fiber washer 8241 150 10571