Text preview for : CDP_CX200.pdf part of SONY CDP-CX200 CD player



Back to : CDP_CX200.part1.rar | Home

CDP-CX200
SERVICE MANUAL
US Model Canadian Model AEP Model UK Model E Model Australian Model PX Model

Model Name Using Similar Mechanism CD Mechanism Type Base Unit Type Optical Pick-up Type

NEW CDM-40 KSM-213BKN/M-N KSS-213B/S-N

SPECIFICATIONS

USA, Canada Europe and Singapore E, PX Australia

120V AC, 60Hz 220V - 230V AC, 50Hz

240V AC, 50Hz

COMPACT DISC PLAYER
MICROFILM

--1--

TABLE OF CONTENTS 1. SERVICING NOTE ........................................................... 3 2. GENERAL .................................................................... 4 3. DISASSEMBLY
3-1. 3-2. 3-3. 3-4. 3-5. Front Panel Assembly ......................................................... 9 Back Panel Assembly ......................................................... 9 Table Assembly ................................................................ 10 Mechanism Deck Assembly ............................................. 10 Base Unit Assembly ......................................................... 11

MODEL IDENTIFICATION -- BACK PANEL --

4-982-790-

4. TEST MODE ............................................................... 12 5. ADJUSTMENTS
5-1. Mechanical Adjsument ..................................................... 13 5-2. Electrical Block Checking ................................................ 19

US Model Canadian Model AEP,German Model UK Model E,PX Model Singapore Model Austrarian Model
CAUTION

: 0 : 1 : 2 : 3 : 4 : 5 : 6

6. DIAGRAMS
6-1. Circuit Boards Location ................................................... 21 6-2. IC Pin Function · IC101 Digital Servo, Digital Signal Processor (CXD2545Q) ................................................................ 22 · IC303 System Control (CXP84332-Q28Q) ................. 25 6-3. Block Diagram ................................................................. 27 6-4. Printed Wiring Board -- BD, DISP Section -- ............... 31 6-5. Schematic Diagram -- BD, DISP Section -- .................. 35 6-6. Printed Wiring Board -- MAIN Section -- ..................... 39 6-7. Schematic Diagram -- MAIN Section -- ........................ 43 6-8. IC Block Diagrams ........................................................... 47

Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.

The laser component in this product is capable of emitting radiation exceeding the limit for Class 1. This appliance is classified as a CLASS 1 LASER product. The CLASS 1 LASER PRODUCT MARKING is located on the rear exterior.

7. EXPLODED VIEWS
7-1. 7-2. 7-3. 7-4. 7-5. 7-6. 7-7. Case and Back Panel Section ........................................... 50 Disc Table Section ............................................................ 51 Front Panel Section .......................................................... 52 Mechanism Section-1 (CDM-40) ..................................... 53 Mechanism Section-2 (CDM-40) ..................................... 54 Base Unit Section-1 (KSM-213BKN/M-N) ..................... 55 Base Unit Section-2 (KSM-213BKN/M-N) ..................... 56

This caution label is located inside the unit.

8. ELECTRICAL PARTS LIST ........................................ 57
Notes on chip component replacement · Never reuse a disconnected chip component. · Notice that the minus side of a tantalum capacitor may be damaged by heat. Flexible Circuit Board Repairing · Keep the temperature of soldering iron around 270°C during repairing. · Do not touch the soldering iron on the same conductor of the circuit board (within 3 times). · Be careful not to apply force on the conductor when soldering or unsoldering.

--2--

SECTION 1 SERVICING NOTE
SAFETY CHECK-OUT (US model only) After correcting the original service problem, perform the following safety checks before releasing the set to the customer: Check the antenna terminals, metal trim, "metallized" knobs, screws, and all other exposed metal parts for AC leakage. Check leakage as described below. LEAKAGE The AC leakage from any exposed metal part to earth Ground and from all exposed metal parts to any exposed metal part having a return to chassis, must not exceed 0.5 mA (500 microampers). Leakage current can be measured by any one of three methods. 1. A commercial leakage tester, such as the Simpson 229 or RCA WT-540A. Follow the manufacturers' instructions to use these instruments. 2. A battery-operated AC milliammeter. The Data Precision 245 digital multimeter is suitable for this job. 3. Measuring the voltage drop across a resistor by means of a VOM or battery-operated AC voltmeter. The "limit" indication is 0.75 V, so analog meters must have an accurate low-voltage scale. The Simpson 250 and Sanwa SH-63Trd are examples of a passive VOM that is suitable. Nearly all battery operated digital multimeters that have a 2V AC range are suitable. (See Fig. A) NOTES ON HANDLING THE OPTICAL PICK-UP BLOCK OR BASE UNIT The laser diode in the optical pick-up block may suffer electrostatic breakdown because of the potential difference generated by the charged electrostatic load, etc. on clothing and the human body. During repair, pay attention to electrostatic breakdown and also use the procedure in the printed matter which is included in the repair parts. The flexible board is easily damaged and should be handled with care. NOTES ON LASER DIODE EMISSION CHECK The laser beam on this model is concentrated so as to be focused on the disc reflective surface by the objective lens in the optical pick-up block. Therefore, when checking the laser diode emission, observe from more than 30 cm away from the objective lens. LASER DIODE AND FOCUS SEARCH OPERATION CHECK Carry out the "S curve check" in "CD section adjustment" and check that the S curve waveform is output repeatedly.

To Exposed Metal Parts on Set

0.15µF

1.5k

AC voltmeter (0.75V)

Earth Ground

Fig. A. Using an AC voltmeter to check AC leakage.

SAFETY-RELATED COMPONENT WARNING !! COMPONENTS IDENTIFIED BY MARK ! OR DOTTED LINE WITH MARK ! ON THE SCHEMATIC DIAGRAMS AND IN THE PARTS LIST ARE CRITICAL TO SAFE OPERATION. REPLACE THESE COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS PUBLISHED BY SONY.

ATTENTION AU COMPOSANT AYANT RAPPORT À LA SÉCURITÉ!! LES COMPOSANTS IDENTIFIÉS PAR UNE MARQUE ! SUR LES DIAGRAMMES SCHÉMATIQUES ET LA LISTE DES PIÈCES SONT CRITIQUES POUR LA SÉCURITÉ DE FONCTIONNEMENT. NE REMPLACER CES COMPOSANTS QUE PAR DES PIÈCES SONY DONT LES NUMÉROS SONT DONNÉS DANS CE MANUEL OU DANS LES SUPPLÉMENTS PUBLIÉS PAR SONY.

--3--

SECTION 2 GENERAL
LOCATION OF PARTS AND CONTROLS
Front Panel

1 23456

7

8

9

!º !¡!TM


1 2 3 4 5 6 7 8 9 !º POWER button CONTINUE button Display window SHUFFLE button PROGRAM button REPEAT button Front cover Remote sensor JOG dial ENTER button !¡ !TM !£ !¢ ! !§ !¶ !·

!¶!§ ! !¢ !£
CHECK button CLEAR button p (stop) button P (pause) button · (play) button AMS* ± button OPEN button BLOCK 1-8 buttons

* AMS is the abbreviation for Automatic Music Sensor.

--4--

This section is extracted from instruction manual.

--5--

PX

--6--

--7--

--8--

SECTION 3 DISASSEMBLY
Note : Follow the disassembly procedure in the numerical order given.

3-1. FRONT PANEL ASSEMBLY
6 Remove the claw 1 Two screws (BVTP 3x8)

7 Front panel assembly

5 Remove the claw

3 Two screws (BVTT 3x6)

4 Flat type wire (CN601) 2 Three screws (BVTT 3x6)

3-2. BACK PANEL ASSEMBLY
5 Remove the PC board holder 1 Connector (CN501)

6 Back panel

2 Four screws (BVTT 3x6)

4 Screw (BVTP3x10) 3 Five screws (BVTT3x6)

--9--

3-3. TABLE ASSEMBLY

4 Three screws (BVTT3x6)

1 Stop ring (E type) 5 Three holder assemblies 6 Table assembly

7 Washer

2 Two screws (BVTT3x6)

3 Two holder assemblies

3-4. MECHANISM DECK ASSEMBLY
!º Mechanism deck 6 Flat type wire (23core) (CN303)

Main board
1 Four screws (BVTT3x6)

Jack board Main board
2 Screw (BVTT3x6) 4 Connector (CN308) 3 Connector (CN303) 5 Guide assembly 7 Connector (CN304)

Jack board

8 Connector (CN504)

Illumination board

9 Nine screws (BVTT3x8)

-- 10 --

3-5. BASE UNIT ASSEMBLY

1 Screw (BVTT3x6) 2 Fulcrum plate (BU UPPER) assy

3 Base unit

-- 11 --

SECTION 4 TEST MODE
4-1. Display Check Mode
With the power turned off (standby state), press the POWER button while pressing the P (pause) button. All FL segments and grids light up together with the · (play), P (pause), and standby LEDs. At the same time, the GROUP LEDs are scanned one by one. Note: To exit this mode, press the POWER button.

4-3. Key and Display Check Mode
To set this mode, connect the test point (TP302:AFADJ) on the MAIN board to Ground, and turn on the power supply plug to the outlet. · All FL segments and grids will light up. (All lit check) When a button is pressed, the types of buttons pressed until then will be displayed on the left side and the number of the buttons will be displayed on the right side. However, these will not be displayed for the following special buttons. p(stop) button: FL segment check (Refer to FL Tube Check Patterns) P(pause) button: FL grid check (Refer to FL Tube Check Patterns) The pause LED also lights up simultaneously. ·(play) button: All FL segment and grid will light up The play LED also lights up simultaneously. FL Tube Check Patterns Segment check

4-2. ADJ Mode
1. Turn ON the power of the unit, set disc to disc table, and perform chucking. 2. Disconnect the power supply plug from the outlet. 3. To set ADJ mode, connect the test point (TP301:ADJ) of the MAIN board to Ground, and turn on the power supply plug to the outlet. The power will turn on automatically, and the first track will be played. In this mode, table rotation and loading operations are not performed because it is taken that the disc has already been chucked. Note: The same operations are also performed in the following when the test point (TP301:ADJ) is connected to Ground after turning on the power. · Direct search (movement of sledding motor) is not performed during accessing · Ignored even when GFS becomes L · Ignored even when the Q data cannot be read · Focus gain does not decrease · Spindle gain does not decrease · Servo related settings can be set manually and checked (Refer to ADJ Mode Special Functions Table) ADJ Mode Special Functions Table (The buttons shown with ( ) function by using the supplied remote commander only)
Button CONTINUE Function Servo average display Displays VC, FE, RF, TE and traverse in hexadecimal numbers Focus bias display Each time this is pressed, the focus bias is switched between 1 and 2 (1) Bias actually set Optimum bias Minimum jitter (2) U:Upper aliasing bias L:Lower aliasing bias Auto gain display Displays focus, tracking, sledding in hexadecimal numbers Increases the focus bias in 8 steps. Sets the focus bias in the middle of aliasing. Turns off the tracking and sledding servo Returns the auto gain to the initial value (30) Turns off the focus servo Decreases the focus bias in 8 steps. Re-adjusts the focus bias Turns on the tracking and sledding servo Switches the focus servo gain between normal and down 08: normal, 0C: down Sets the focus bias to 0 (no bias) Next, displays the jitter measured at the focus bias set S-curve observation mode Automatic eccentric measurement The results of measurement is displayed in µm directly.

2

1

Grid check

PROGRAM

REPEAT 1

REMOTE

· When the jog dial is rotated to the right, the Block indicators of FL light up in the order of 1n2..8n1. · When the jog dial is rotated to the left, the Block indicators of FL light up in the order of 8n7..1n8. · The standby LED lights up when the door switch is shut. · Abbreviation FL: Fluorescent Indicator Tube [ MAIN BOARD ] -- Component Side --

SHUFFLE

PROGRAM

IC303 R337 IC307 TP301 R311 ADJ R310 TP302 AFADJ

BLOCK 1 (1) BLOCK 2 (2) BLOCK 3 (3) BLOCK 4 (4) BLOCK 5 (5) BLOCK 6 (6) BLOCK 7 (7) BLOCK 8 (8) (9) (10/0) CHECK CLEAR

IC301

-- 12 --

SECTION 5 ADJUSTMENTS
5-1. MECHANICAL ADJUSTMENT
Perform the following steps before carrying out adjustments. 1. Turn ON the power of the unit, set disc to disc table No. 92, and perform chucking. 2. Turn OFF the power. 3. Remove the case. 4. While pressing the STOP button, turn ON the POWER button. The test mode is set. 5. The POWER button LED starts blinking. (Test mode)

LED

POWER
POWER button STOP button

NOTE 1: The cam will start rotating when the BLOCK 1 or BLOCK 5 button is pressed continuously in the test mode.
BLOCK 1 button BLOCK 5 button BLOCK 1 button BLOCK 5 button

NOTE 2: If the power cannot be supplied, the cam can be rotated by rotating the pulley with your finger.

Cam

Pulley

-- 13 --

SENSOR ALIGNMENT If the disc table swings to the left and right just before the disc is chucked, perform the following adjustment.
Cam LEVER (stopper) assembly

Cam

(1)Rotate the cam and adjust to the position shown in the figure.

Bracket (sensor)

Table assembly

(2) Check that the lever (stopper) assembly secures the disc table as shown in the figure.

Disc table

Swing Lever (stopper) assembly

(4)Moving the disc table right and left with a hand after the screw is fixed, the table will move by the play of a disc table. If the LEDs light up alternately, the adjustment will be performed correctly)

Tepering screwdriver

Luminus board PLAY button Bracket (sensor) PAUSE button

Fixed screw

(3)Loosen the fixed screw by 60° to 90°, and use a tapering screwdriver to adjust the screw as shown in the figure. Move the bracket (sensor) with the tapering screwdriver little by little, and fix the fixed at where the paly botton's LED (green) is switched to the pause button's LED (orange) (or its reverse).

-- 14 --

GUIDE (DISC T) ALIGNMENT

Cam

Holder (guide T)

Cam

Guide (disc T)

Fixed screw

(1) Rotate the cam and adjust to the position shown in the figure.

Guide (disc T)

(2) Check that the state is as shown in the figure.

Disc

A B Guide (disc T)

Tapering screwdriver

Disc Holder (guide T)

(3) Loosen the fixed screw by about 60 °.

Holder (guide T)

(4)Move the holder (guide T) with a tapering screwdriver, and set the position of the guide (disc T) to A:B=1:1.

-- 15 --

HOLDER (DISC A) ALIGNMENT
Cam

Holder (disc A)

Cam

Thrust screw

(1)Rotate the cam and adjust to the position shown in the figure.

Disc 0­1 mm

Holder (disc A)

(2)Check that the state is as shown in the figure.

Disc

Holder (disc A)

Thrust screw

(3)After applying screw-lock to the

4321 4321 4321

part, rotate the thrust screw until the holder (Disc A) comes to the center of the disc.

-- 16 --

PULLY AND DISC CENTER HOLE ALIGNMENT

Cam

Base unit

Cam Bracket (BU adjustment)

(1) Rotate the cam and adjust to the position shown in the figure.
Magnet assembly

(2)Check that the state is as shown in the figure.
0.5­2mm Disc Disc pulley Disc hole Base unit

Note:The disc should not be fixed.
Holer (disc A)

A

B

Fixed screw

Bracket (BU adjustment)

Tapering screwdriver Magnet assembly

(3)Remove the Magnet assembly.

Loosen the fixed screw by 60° to 90°, and move and adjust the bracket (BU adjustment) up and down using a tapering screwdriver so that the positions of the disc hole and disc pulley become A=B or between A:B=2:1 and 1:2.

-- 17 --

MAGNET ASSY ALIGNMENT

Cam

Cam Adjustment screw

Magnet assy

(1)Rotate the cam and adjust to the position shown in the figure.

Magnet holder

Disc

Magnet assy

Adjustment screw

A

B

(3)Apply screw-lock to the

4321 4321

part after adjusting.

Adjustment screw

(2)Rotate the adjustment screw until A=B or between A:B=2:1 and 1:2

-- 18 --

5-2. ELECTRICAL BLOCK CHECKING
Note: 1. CD Block is basically designed to operate without adjustment. Therefore, check each item in order given. 2. Use YEDS-18 disc (3-702-101-01) unless otherwise indicated. 3. Use an oscilloscope with more than 10M impedance. 4. Clean the object lens by an applicator with neutral detergent when the signal level is low than specified value with the following checks. S-Curve Check
oscilloscope BD board TP (FE 1) TP (VC) BD board

Note: A clear RF signal waveform means that the shape "" can be clearly distinguished at the center of the waveform.
RF signal waveform
VOLT/DIV : 200mV TIME/DIV : 500ns level : 1.2 ­0.20 Vp-p
+0.25

E-F Balance Check
oscilloscope

Procedure : 1. Connect oscilloscope to test point TP (FE 1) on BD board. 2. Connect test point TP301 (ADJ) on MAIN board to ground with lead wire. 3. Turn Power switch on to set the ADJ mode. 4. Put disc (YEDS-18) in and playback. Press the CHECK button. 5. Check the oscilloscope waveform (S-curve) is symmetrical between A and B. And confirm peak to peak level within 3±1 Vp-p.
S-curve waveform
symmetry

TP (TE) TP (VC)

A within 3 ± 1 Vp-p B

Procedure : 1. Connect oscilloscpe to test point TP (TE) on BD board. 2. Connect the test point TP301 (ADJ) on MAIN board to the ground with a lead wire. 3. Turn the Power switch on to set the ADJ mode. 4. Put disc (YEDS-18) in to play the number five track. 5. Press the "BLOCK3" button. (The tracking servo and the sledding servo are turned OFF.) 6. Check the level B of the oscilliscope's waveform and the A (DC voltage) of the center of the Traverse waveform. Confirm the following : A/B x 100 = less than ± 22%
Traverse waveform
Center of the waveform

B

6. After check, remove the lead wire connected in step 2. Note : · Try to measure several times to make sure than the ratio of A : B or B : A is more than 10 : 7. · Take sweep time as long as possible and light up the brightness to obtain best waveform. RF Level Check
oscilloscope BD board TP (RF) TP (VC)

0V

A (DC voltage)

level : 1.3 ± 0.6 Vp-p

7. Press the "BLOCK 8" button. (The tracking servo and sledding servo are turned ON.) Confirm the C (DC voltage) is almost equal to the A (DC voltage) is step 6.
Traverse waveform

Procedure : 1. Connect oscilloscope to test point TP (RF) on BD board. 2. Turn Power switch on. 3. Put disc (YEDS-18) in to play the number five track. 4. Confirm that oscilloscope waveform is clear and check RF signal level is correct or not.

0V

C (DC voltage)

Tracking servo Sledding servo OFF

Tracking servo Sledding servo ON

8. Disconnect the lead wire of TP301 (ADJ) connected in step 1.

-- 19 --

RF PLL Free-run Frequency Check Procedure : 1. Connect frequency counter to test point TP (PLCK) with lead wire.
BD board TP (PLCK) frequency counter

2. Turn Power switch on. 3. Put the disc (YEDS-18) in to play the number five track. Confirm that reading on frequency counter is 4.3218MHz. Adjustment Location : [ MAIN BOARD ] -- Component Side --

IC303 R337 IC307 TP301 R311 ADJ R310 TP302 AFADJ

IC301

[ BD BOARD ] -- Side B --

IC101 TP (PLCK)

TP (FE1) TP (RF) TP (TE)

TP (VC) IC103

-- 20 --

SECTION 6 DIAGRAMS
6-1. CIRCUIT BOARDS LOCATION

LUMINOUS board MAIN board T. SENS board ILLUMINATION board

DISP board

JACK board

T. MOTOR board DOOR SW board RAY-CATCHER board

JOG board

BD board

L.SW board

L. MOTOR board

-- 21 --

6-2. IC PIN FUNCTIONS
· IC101 DIGITAL SERVO, DIGITAL SIGNAL PROCESSOR (CXD2545Q) Pin No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 SRON SRDR SFON TFDR TRON TRDR TFON FFDR FRON FRDR FFON VCOO VCOI TEST DVss TES2 TES3 PDO VPCO VCKI AVD2 IGEN AVS2 ADIO RFC RFDC TE SE FE VC FILO FILI PCO CLTV AVS1 RFAC BIAS ASYI ASYO AVD1 Pin Name I/O
O O O O O O O O O O O O I I ­ I I O O I ­ I ­ I O I I I I I O I O I ­ I I I O ­

Function Sled drive output (Open) Sled drive output Sled drive output (Open) Tracking drive output Tracking drive output (Open) Tracking drive output Tracking drive output (Open) Focus drive output Focus drive output (Open) Focus drive output Focus drive output (Open) VCO output for analog EFM PLL (Open) VCO input from for analog EFM PLL (Connected to Ground) TEST pin connected normally to Ground (Connected to Ground) Digital Ground TEST pin connected normally to Ground TEST pin connected normally to Ground Charge-pump output for analog EFM PLL (Open) Charge-pump output for variable pitch PLL (Open) Clock input from variable pitch external VCO (Connected to Ground) Analog power supply Power supply pin for operational amplifiers Analog Ground (Open) (Open) RF signal input Tracking error signal input Sled error signal input Focus error signal input Center voltage input pin Filter output for master PLL Filter input for master PLL Charge-pump output for master PLL Control voltage input for master VCO Analog Ground EFM signal input Asymmetry circuit constant current input Asymmetry comparate voltage input EFM full swing output Analog power supply

· Abbreviation EFM: Eight to Fourteen Modulation PLL: Phase Locked Loop

-- 22 --

Pin No. 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 DVDD ASYE PSSL

Pin Name

I/O ­ I I O O O O O O O O O O O O O O O O O O I O I ­ I O O O I O O O O O I O I I O Digital power supply

Function Asymmetry circuit ON/OFF (Connected to +5V) Audio data output mode selection input (Connected to Ground) 48-bit slot D/A interface. Word clock. (Open) 48-bit slot D/A interface. LR clock. DA 16 output when PSSL=1.48-bit slot serial data when PSSL=0 DA 15 output when PSSL=1.48-bit slot data when PSSL=0 DA 14 output when PSSL=1.64-bit slot data when PSSL=0 (Open) DA 13 output when PSSL=1.64-bit slot data when PSSL=0 (Open) DA 12 output when PSSL=1.64-bit slot data when PSSL=0 (Open) DA 11 output when PSSL=1.GTOP output when PSSL=0 (Open) DA 10 output when PSSL=1.XUGF output when PSSL=0 (Open) DA 09 output when PSSL=1.XPLCK output when PSSL=0 (Open) DA 08 output when PSSL=1.GFS output when PSSL=0 (Open) DA 07 output when PSSL=1.RFCK output when PSSL=0 (Open) DA 06 output when PSSL=1.C2PO output when PSSL=0 (Open) DA 05 output when PSSL=1.XRA0F output when PSSL=0 (Open) DA 04 output when PSSL=1.MNT3 output when PSSL=0 (Open) DA 03 output when PSSL=1.MNT2 output when PSSL=0 (Open) DA 02 output when PSSL=1.MNT1 output when PSSL=0 (Open) DA 01 output when PSSL=1.MNT0 output when PSSL=0 (Open) X'tal oscillator circuit input X'tal oscillator circuit output (Open) X'tal selection input pin (Connected to Ground) Digital Ground Clock input for digital servo block 2/3 divider output of pins 62, 63 1/4 divider output of pins 62, 63 (Open) 16.9344 MHz output (Open) Digital-out ON/OFF control pin (Connected to +5V) Digital-out output pin (Open) Playback disc output in emphasis mode (Open) WFCK output (Open) Sub-code sync output Sub-P through Sub-W serial output (Open) Clock input for SBSO read-out (Connected to Ground via a 10 k) Sub-Q 80-bit output Clock input for SQSO read-out Muting selection pin SENS output

WDCK LRCK DATA BCLK 64DATA 64BCLK 64LRCK GTOP XUGF XPLCK GFS PFCK C2PO XRAOF MNT3 MNT2 MNT1 MNT0 XTAI XTAO XTSL DVss FSTI FSTO FSOF C16M MD2 DOUT EMPH WFCK SCOR SBSO EXCK SUBQ SQCK MUTE SENS

· Abbreviation WFCK: Wirte Frame Clock

-- 23 --

Pin No. 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100

Pin Name XRST DIRC SCLK DFSW ATSK DATA XLAT CLOK COUT DVDD MIRR DFCT FOK FSW MON MDP MDS LOCK SSTP SFDR

I/O I I I I I I I I O ­ O O O O O O O O I O System reset

Function Used in 1-track jump mode (Connected to +5v) SENS serial data read-out clock Defect selection pin (Connected to Ground) Input pin for anti-shock (Connected to Ground) Serial data input, supplied from CPU Latch input, supplied from CPU Serial data transfer clock input, supplied from CPU Numbers of track counted signal output (Open) Digital power supply Mirror signal output (Open) Defect signal output (Open) Focus OK output (Open) Output to select spindle motor output filter (Open) Output to control ON/OFF of spindle motor (Open) Output to control spindle motor servo Output to control spindle motor servo (Open) GFS is sampled by 460 Hz. H when GFS is H (Open) Input signal to detect disc inner most track Sled drive output

· Abbreviation GFS: Guard Frame Sync

-- 24 --

· IC303 SYSTEM CONTROL (CXD84332-028Q) Pin No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 A3 A4 A5 A6 A7 A12 A14 A11 A10 A9 A8 A13 WE LED1 LED2 LED 3 DOOR SW SCLK SRDT MODE BUSOUT LDOUT LDIN TBL.L TBL.R S.RST FL.DATA FL.CLK LDON RESET EXTAL XTAL VSS TX TEX AVSS AVREF I.SENS CD 1/2/3 D.SENS Pin Name I/O
O O O O O O O O O O O O O O O O I O I O O O O O O O O O O I O I ­ ­ ­ ­ ­ I I I

Function Open Open Open Open Open Open Open Open Open Open Open Open Open PLAY LED control PAUSE LED control Front foor switch Open Open Pull-up for +5V CONTROL-A1 out Loading motor PWM output for outside direction Loading motor PWM output for inside direction Table motor PWM output for left turn Table motor PWM output for right turn Power control H: Power ON Data for fluorescent indicator and LED control Clock for fluorescent indicator and LED control Laaser diode control Reset input L: Reset H: ON H: Lighting up L: Lighting up L: Lighting up

POWER standby LED conteol H: Open

X'tal Oscillation (10MHz) X'tal Oscillation (10MHz) Connect to ground Open Connect to ground Connect to ground Connect to +5V Table motor current detect Command mode switch Disc sensor input Less than 3V: Existing disc More than 3V: Avnormal condition

-- 25 --

Pin No. 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 KEY2 KEY1 KEY0 XLT

Pin Name

I/O I I I O I I O O O O O I ­ I I I I O O O O I I I I I O I/O I/O I/O I/O ­ ­ I/O I/O I/O I/O O O O Key input Key input Key input Latch for servo IC Test mode input. CONTROL-A1 input L: Active Latch for digital filter IC Clock for servo IC and digital filter IC Audio mute H: Mute ON Data for servo IC and digital filter IC Clock for sub code Q Sub code Q data input Open Servo sensor signal Jog input Remote control signal Jog input Open

Function

AFADJ ADJ BUSIN PRGLT CLK AMUTE DATA SQCK SUBQ NC SENSE JOG2 RMIN JOG1 LEDLT FLT DQSY SCOR T.SENS1 T.SENS2 T.SENS3 DOWN SW UPSW BLK D3 D4 D5 D6 VDD NC (VDD) D7 D0 D1 D2 A0 A1 A2

Latch for fluorescent indicator driver IC Open Sub code Q synchronous signal Table position sensor 1 input Table position sensor 2 input Table position sensor 3 input Loading out switch input Loading in switch input Open Open Open Open Connect to +5V Connect to +5V Open Open Open Open Open Open Open L: Out L: In Start at rising edge

Reset for fluorescent indicator driver IC

-- 26 --

SECTION 7 EXPLODED VIEWS
NOTE: · Items marked "*" are not stocked since they are seldom required for routine service. Some delay should be anticipated when ordering these items. · The mechanical parts with no reference number in the exploded views are not supplied. · Hardware (# mark) list and accessories and packing materials are given in the last of this parts list. · Abbreviation CND : Canadian model G : German model SP : Singapore model AUS : Australian model The components identified by mark ! or dotted line with mark ! are critical for safety. Replace only with part number specified. Les composants identifiés par une marque ! sont critiques pour la sécurité. Ne les remplacer que par une piéce portant le numéro spécifié.

7-1. CASE AND BACK PANEL SECTION 1 1

1

7
not supplied

6
#2

#2

9

2

#2 #2 #3 not supplied

1 5
#2 #2

8
#2

13
#2

4
not supplied

T501 #2

#1 #1

3

10

11

#2

AEP, G, SP models CNP901

AUS model CNP901 US, CND models

FRONT PANEL

UK model CNP901 #2

E,PX model CNP901

12
Ref. No. 8 9 * 10 * 11 12 13 ! CNP901 ! CNP901 ! CNP901 ! CNP901 ! CNP901 ! T501 ! T501 ! T501 Part No. 3-703-571-11 4-956-370-12 4-962-200-01 1-661-459-11 1-569-007-11 4-886-821-11 1-575-042-21 1-575-651-21 1-696-027-11 1-696-845-11 1-751-529-11 1-429-670-11 1-429-671-11 1-429-672-11

CNP901

Ref. No. 1 * 2 * 3 * 3 4 5 6 7 7 7 7 7 7 7 8

Part No. 3-363-099-01 4-982-946-11 A-4699-023-A A-4699-024-A 1-773-183-11 1-777-345-11 4-982-807-01 4-982-790-01 4-982-790-11 4-982-790-21 4-982-790-31 4-982-790-41 4-982-790-51 4-982-790-61 3-703-244-00

Description

Remark

Description BUSHING (S) (4516), CORD (E,PX) BAND, PLUG FIXED (UK,AUS) PLATE (TR), GROUND JACK BOARD ADAPTOR, CONVERSION 2P (E,PX) SCREW, M3 CASE CORD, POWER (US,CND) CORD, POWER (AEP,G,SP) CORD, POWER (E,PX) CORD, POWER (AUS)

Remark

SCREW (CASE 3 TP2) CASE MAIN BOARD, COMPLETE (US,CND) MAIN BOARD, COMPLETE (EXCEPT US,CND) WIRE (FLAT TYPE) (23 CORE) WIRE (FLAT TYPE) (19 CORE) COVER (FFC) PANEL, BACK (US) PANEL, BACK (CND) PANEL, BACK (AEP,G) PANEL, BACK (UK) PANEL, BACK (E,PX) PANEL, BACK (SP) PANEL, BACK (AUS) BUSHING (2104), CORD (EXCEPT E,PX)

* * * * * * * * *

CORD, POWER (UK) TRANSFORMER, POWER (US,CND) TRANSFORMER, POWER (AEP,G,UK,AUS,SP) TRANSFORMER, POWER (E,PX)

-- 50 --

7-2. DISC TABLE SECTION
#2

62
not supplied not #9 supplied

78

76
#2

72 73

75

#6 #2 #1

75
#1

74

75
#3 #8

#9 not supplied

74 71
#1

70

69
#2

#2

#1 not supplied

68 61 #2
#2

63 67

not supplied

59 80 60
#2 79

58

62
#2 not supplied #2

54 57

62

54 56 55 54 53
#12

81

#2

not supplied #2 #2

77
not supplied

64
#2

52
#6

M801

51
Ref. No. * 51 52 53 54 55 56 57 58 * 59 * 60 * 61 62 63 64 65 Part No. 1-661-466-11 X-4947-230-1 X-4947-607-1 3-325-697-21 4-982-867-01 4-982-893-01 4-982-891-01 4-982-892-01 1-661-468-11 1-661-469-11 1-661-470-11 3-356-601-11 3-701-446-21 X-4947-229-1 4-931-169-01 Description T. MOTOR BOARD BRACKET (TABLE) ASSY GEAR (PULLEY) ASSY WASHER BELT (TIMING) GEAR (CENTER 2) GEAR (TABLE) SHAFT (CENTER) LUMINOUS BOARD RAY-CATCHER BOARD T.SENS BOARD SCREW, STEP WASHER, 8 HOLDER (ROLLER) ASSY FOOT

not supplied #7
Remark

not supplied

65
Ref. No. 66 * 67 68 * 69 70 71 * 72 * 73 * 74 75 76 77 78 * 79 * 80 81 M801

#2

66
Description CUSHION (RF) COVER (DISC) INDICATOR (INTERNAL) ILLUMINATION BOARD TABLE (200) ASSY BEARING (TABLE) RING (B) RING (A) CUSHION, SARANET CUSHION GUIDE (DISC T) STOPPER, WIRING SHAFT (GUIDE FULCRUM) HOLDER (P-T) HOLDER (LED-S) Remark

Part No. 4-983-279-01 4-982-804-01 4-982-805-01 1-661-471-11 X-4947-231-1 4-976-471-01 4-982-803-01 4-982-802-01 3-378-433-01 4-985-553-01 4-982-862-01 3-703-397-01 4-982-870-01 4-985-300-01 4-976-473-01

X-4947-606-1 HOLDER (ROLLER 2) ASSY A-4604-847-A MOTOR ASSY, LOADING (TABLE)

-- 51 --

7-3. FRONT PANEL SECTION 131 131 131 117
FL701

131

118 131 129

131 112

115 #5 128 131 114 131 124
not supplied

127

126

119 131 125 131

111

131 123 131
#5 #5

120

114 122 131

104

EXCEPT US,CND

121

109 101 105 106 107 110 108

Ref. No. 101 104 105 106 107 108 108 109 110 111 112 114 * 115 * 117 * 118

Part No. X-4947-588-1 4-982-781-01 4-982-787-01 4-982-788-01 4-984-085-01 X-4947-216-1 X-4947-359-1 4-977-593-11 4-977-358-11 4-963-404-21 X-4947-219-1 4-982-799-01 4-982-793-01 A-4699-037-A 4-982-786-01

Description LID(200) ASSY BUTTON (OPEN) KNOB (JOG) BUTTON (ENTER) SPRING (ENTER), COIL

Remark

Ref. No. * 119 120 121 122 * 123 * 124 * 125 126 127 128 * 129 131

Part No. 1-661-464-11 4-982-798-11 X-4947-220-1 3-354-963-01 4-982-794-01 4-982-782-01 4-982-783-01 4-933-134-01 4-982-785-01 4-982-784-01

Description DOOR SW BOARD SPRING (B), TORSION PLATE (B) ASSY, FULCRUM DAMPER STOPPER (B) HOLDER (OPEN) LEVER (WINDMILL) SCREW (+PTPWH M2.6X6) SPRING (OPEN), COMPRESSION LEVER (LOCK)

Remark

PANEL ASSY, FRONT (US,CND) PANEL ASSY, FRONT (EXCEPT US,CND) RING (DIA. 50), ORNAMENTAL (EXCEPT US,CND) CUSHION (8X12.5) EMBLEM (5-A), SONY PLATE (A) ASSY, FULCRUM CUSHION (STOPPER) STOPPER (A) DISP BOARD, COMPLETE HOLDER (FL)

A-4699-036-A JOG BOARD, COMPLETE 4-951-620-01 SCREW (2.6X8), +BVTP

-- 52 --

7-4. MECHANISM SECTION-1 (CDM-40)
#2 not supplied

174
#11

175
#2

#2

161
#2

168 #9 167 162
not supplied

171 173 170

172 160 153
#9 #15 #1

154
#9

not supplied

151 152 155
not supplied

159 158
#10

166 165

156 164 157

163

176

Ref. No. FL701 151 152 153 154 155 156 157 158 159 160 161 162

Part No. 1-517-517-11 X-4947-241-1 4-982-882-01 4-982-881-01 X-4947-239-1 4-982-853-01 X-4947-240-1 4-982-854-01 4-982-855-01 4-982-856-01 4-976-458-01

Description INDICATOR TUBE, FLUORESCENT LEVER (C) ASSY SPRING (LIMITTER), TORSION SPRING (HOLDER), TORSION LIMITTER (A) ASSY LEVER (B) LEVER (A) ASSY HOLDER (DISC A) HOLDER (DISC B) PAD HOLDER (MAGNET)

Remark

Ref. No. 163 164 165 166 167 * 168 170 171 172 173 * 174 175 176

Part No.

Description

Remark

A-4672-092-A MAGNET ASSY 3-366-559-02 MAGNET (CHUCK) 4-960-633-01 YOKE (MAGNET) 4-960-632-11 4-983-319-01 4-976-456-01 X-4947-242-1 X-4947-238-1 X-4947-237-1 4-982-880-01 4-982-863-01 3-938-588-01 3-701-441-21 PULLEY (B) SPRING (THRUST), COMPRESSION WASHER (STOPPER) SLIDER (C) ASSY SLIDER (B) ASSY SLIDER (A) ASSY SPRING (SLIDER A),TENSION GUIDE (DISC P) SPRING, COMPRESSION ø4 POLY WASHER

X-4946-326-1 HOLDER (CLAMP) ASSY 4-983-777-01 SPRING (MG), TENSION

-- 53 --

7-5. MECHANISM SECTION-2 (CDM-40) 212 206 210 205 206 206 206 203 204
#2 #9

206 201

213 214 216
not supplied

202 215
#2

not supplied #8

211

209
not supplied

#12

#16

208
M802

207

Ref. No. 201 202 203 204 205 206 * 207 * 208 209 210

Part No. 4-976-465-01 4-976-466-01 4-982-893-01 X-4947-607-1 4-982-867-01 3-325-697-21 1-661-465-11 1-661-467-11 3-489-073-00 X-4947-227-1

Description GEAR (LOADING 1) GEAR (LOADING 2) GEAR (CENTER 2) GEAR (PULLEY) ASSY BELT (TIMING) WASHER L.MOTOR BOARD L.SW BOARD SCREW, THRUST LEVER (STOPPER) ASSY

Remark

Ref. No. 211 212 213 214 215 216 M802

Part No. 4-951-291-01 X-4947-234-1 4-982-857-01 4-982-860-01 4-982-861-01

Description SCREW SLIDER (LOCK) ASSY BEARING (CAM) CAM (A) CAM (B)

Remark

3-356-601-11 SCREW, STEP A-4604-847-A MOTOR ASSY, LOADING (LOADING)

-- 54 --

7-6. BASE UNIT SECTION-1 (KSM-213BKN/M-N)
#13

259 255 258 255 258
#13

#13

#13

259 259 255

258

259 255 257 256 255

258

255 254

254

254

255 254

251

253

252
#2

Ref. No. 251 252 253 254 255

Part No. 3-356-601-11 X-4947-244-1 X-4947-243-1 4-982-859-01 4-982-878-01

Description SCREW, STEP SLIDER (BU ADJUSTMENT) ASSY HOLDER (BU) ASSY HOLDER (DAMPER) SPRING (F), COMPRESSION

Remark

Ref. No. 256 257 258 259

Part No. 4-982-872-01 4-982-871-01 4-982-858-01 4-960-617-01

Description SPRING (F-2), TENSION SPRING (F-1), TENSION DAMPER CAP (F)

Remark

-- 55 --

7-7. BASE UNIT SECTION-2 (KSM-213 BKN/M-N)

not supplied

not supplied #17

305 306

303

#17

302
not supplied

M101 not supplied

304
M102

301
#13

The components identified by mark ! or dotted line with mark ! are critical for safety. Replace only with part number specified. Les composants identifiés par une marque ! sont critiques pour la sécurité. Ne les remplacer que par une piéce portant le numéro spécifié.

Ref. No. * 301 302 303 304 305

Part No. A-4699-038-A 2-626-907-01 2-627-003-01 1-769-069-11 2-626-908-01

Description BD BOARD, COMPLETE GEAR (A)(S) GEAR (B)(RP) WIRE (FLAT TYPE) (16 CORE) SHAFT, SLED

Remark

Ref. No. ! 306 M101 M102

Part No.

Description

Remark

8-848-376-01 OPTICAL PICK-UP BLOCK KSS-213B/S-N X-2626-234-1 T.T CHASSIS ASSY (MG)(K)(SPINDLE) X-2625-769-1 MOTOR GEAR ASSY (MB)(RP)(SLED)

-- 56 --

SECTION 8 ELECTRICAL PARTS LIST
Note: The components identified by mark ! or dotted line with mark ! are critical for safety. Replace only with part number specified. Les composants identifiés par une marque ! sont critiques pour la sécurité. Ne les remplacer que par une piéce portant le numéro spécifié. When indicating parts by reference number, please include the board name. Ref. No. * Part No. Description · Due to standardization, replacements in the parts list may be different from the parts specified in the diagrams or the components used on the set. · -XX, -X mean standardized parts, so they may have some difference from the original one. · Items marked "*" are not stocked since they are seldom required for routine service. Some delay should be anticipated when ordering these items. · RESISTORS All resistors are in ohms METAL: Metal-film resistor METAL OXIDE: Metal Oxide-film resistor F : nonflammable · SEMICONDUCTORS In each case, u: µ , for example: uA...: µ A..., uPA...: µ PA..., uPB...: µ PB..., uPC...: µ PC..., uPD...: µ PD... · CAPACITORS uF : µ F · COILS uH : µ H · Abbreviation CND : Canadian model G : German model SP : Singapore model AUS : Australian model

BD

Remark

Ref. No.

Part No.

Description < MOTOR >

Remark

A-4699-038-A BD BOARD, COMPLETE ******************* < CAPACITOR > C101 C102 C103 C105 C106 C107 C108 C109 C110 C111 C112 C113 C115 C116 C117 C118 C119 C123 C124 C140 C141 C151 C153 C154 C156 C157 C159 C161 1-163-005-11 1-163-038-91 1-163-005-11 1-135-155-21 1-164-346-11 1-164-346-11 1-163-035-00 1-163-145-00 1-163-017-00 1-163-251-11 1-163-038-91 1-163-038-91 1-126-607-11 1-126-607-11 1-126-209-11 1-163-275-11 1-163-231-11 1-164-232-11 1-164-005-11 1-163-038-91 1-163-038-91 1-163-237-11 1-163-038-91 1-164-336-11 1-163-237-11 CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP TANTALUM CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP ELECT CHIP ELECT CHIP ELECT CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP 470PF 0.1uF 470PF 4.7uF 1uF 1uF 0.047uF 0.0015uF 0.0047uF 100PF 0.1uF 0.1uF 47uF 47uF 100uF 0.001uF 15PF 0.01uF 0.47uF 0.1uF 0.1uF 27PF 0.1uF 0.33uF 27PF 0.0015uF 0.0068uF 0.1uF 10% 10% 10% 50V 25V 50V 16V 16V 16V 50V 50V 50V 50V 25V 25V 4V 4V 4V 50V 50V 50V 25V 25V 25V 50V 25V 25V 50V 50V 50V 25V M101 M102

X-2626-234-1 T.T CHASSIS ASSY (MG)(K)(SPINDLE) X-2625-769-1 MOTOR GEAR ASSY (MB)(RP)(SLED) < TRANSISTOR >

Q101

8-729-010-08 TRANSISTOR MSB710-R < RESISTOR >

5% 5% 5%

R101 R102 R103 R104 R105 R106 R107 R108 R109 R110 R112 R114 R123 R124 R125 R126 R127 R131 R135 R136 R137 R138 R141 R142 R143 R144 R146 R147 R148 R149 R158 R159 R160 R161

1-216-077-00 1-216-097-91 1-216-077-00 1-216-085-00 1-216-097-91 1-216-061-00 1-216-061-00 1-216-073-00 1-216-121-91 1-216-025-91 1-216-049-91 1-216-073-00 1-216-073-00 1-216-097-91 1-216-049-91 1-216-049-91 1-216-049-91 1-216-037-00 1-216-295-91 1-216-295-91 1-216-295-91 1-216-295-91 1-216-089-91 1-216-081-00 1-216-103-00 1-216-103-00 1-216-073-00 1-216-081-00 1-216-001-00 1-216-003-11 1-216-111-91 1-216-101-00 1-216-295-91 1-216-308-00

METAL CHIP METAL GLAZE METAL CHIP METAL CHIP METAL GLAZE METAL CHIP METAL CHIP METAL CHIP METAL GLAZE METAL GLAZE METAL GLAZE METAL CHIP METAL CHIP METAL GLAZE METAL GLAZE

15K 100K 15K 33K 100K 3.3K 3.3K 10K 1M 100 1K 10K 10K 100K 1K

5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5%

1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W

20% 20% 20% 5% 5%

5%

5% 5% 10%

METAL GLAZE 1K METAL GLAZE 1K METAL CHIP 330 CONDUCTOR, CHIP(2012) CONDUCTOR, CHIP(2012) CONDUCTOR, CHIP(2012) CONDUCTOR, CHIP(2012) METAL GLAZE 47K METAL CHIP 22K METAL CHIP 180K METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL GLAZE 180K 10K 22K 10 12

1-163-145-00 CERAMIC CHIP 1-163-019-00 CERAMIC CHIP 1-163-038-91 CERAMIC CHIP < CONNECTOR >

5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5%

1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W

CN101 CN102

1-770-072-11 CONNECTOR, FFC 23P 1-770-014-11 CONNECTOR, FFC/FPC 16P < IC >

IC101 IC102 IC103

8-752-369-78 IC CXD2545Q 8-759-176-09 IC BA6392FP 8-752-072-45 IC CXA1821M-T6

METAL GLAZE 390K METAL CHIP 150K CONDUCTOR, CHIP(2012) METAL CHIP 4.7

-- 57 --

BD
Ref. No. R162

DISP
Part No.

DOOR SW
Description 150K

ILLUMINATION
Remark 5% 1/10W Ref. No. S702 S703 S704 S705 S706 S707 S708 S709 S712 S713 S714 S715

JACK
Part No. 1-572-184-11 1-572-184-11 1-572-184-11 1-572-184-11 1-572-184-11 1-572-184-11 1-572-184-11 1-572-184-11 1-572-184-11 Description SWITCH, TACTILE (CONTINUE)) SWITCH, TACTILE (SHUFFLE) SWITCH, TACTILE (PROGRAM) SWITCH, TACTILE (REPEAT) SWITCH, TACTILE (BLOCK 4) SWITCH, TACTILE (BLOCK 3) SWITCH, TACTILE (BLOCK 2) SWITCH, TACTILE (BLOCK 1) SWITCH, TACTILE (BLOCK 5) Remark

1-216-101-00 METAL CHIP < SWITCH >

S101

1-572-085-11 SWITCH, LEAF (LIMIT)

************************************************************** * A-4699-037-A DISP BOARD, COMPLETE ********************* 4-982-786-01 HOLDER (FL) < CAPACITOR > C751 C752 C753 C754 C755 C756 C757 1-162-207-31 1-164-159-11 1-124-584-00 1-164-159-11 1-162-288-31 CERAMIC CERAMIC ELECT CERAMIC CERAMIC 22PF 0.1uF 100uF 0.1uF 330PF 330PF 330PF 5% 20% 10% 10% 10% 50V 50V 10V 50V 50V 50V 50V

*

1-572-184-11 SWITCH, TACTILE (BLOCK 6) 1-572-184-11 SWITCH, TACTILE (BLOCK 7) 1-572-184-11 SWITCH, TACTILE (BLOCK 8)

************************************************************** * 1-661-464-11 DOOR SW BOARD ************* < SWITCH >

1-162-288-31 CERAMIC 1-162-288-31 CERAMIC < DIODE >

S802

1-762-386-11 SWITCH, PUSH (OPEN)

************************************************************** * 1-661-471-11 ILLUMINATION BOARD ****************** < CONNECTOR >

D802

8-719-046-44 DIODE SEL5221S (POWER) < FLUORESCENT INDICATOR >

FL701

1-517-517-11 INDICATOR TUBE, FLUORESCENT CN810 < IC > < DIODE > 1-506-481-11 PIN, CONNECTOR 2P

IC701

8-759-399-58 IC LC75725E < RESISTOR > D802 D803 D804 680 1K 1.5K 2.2K 3.3K 6.8K 15K 47K 680 1K 1.5K 2.2K 10K 220 220 220 470 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 1/4W 1/4W 1/4W 1/4W 1/4W F F F F 8-719-059-65 DIODE HLMF-KL05 (INSIDE ILLUMINATION) 8-719-059-65 DIODE HLMF-KL05 (INSIDE ILLUMINATION) 8-719-059-65 DIODE HLMF-KL05 (INSIDE ILLUMINATION) < RESISTOR > R805 R806 R807 1-249-407-11 CARBON 1-249-407-11 CARBON 1-249-407-11 CARBON 150 150 150 5% 5% 5% 1/4W F 1/4W F 1/4W F

R701 R702 R703 R704 R705 R706 R707 R708 R711 R712 R713 R714 R752 R753 R754 R755 R853

1-249-415-11 1-249-417-11 1-249-419-11 1-249-421-11 1-247-843-11 1-249-427-11 1-249-431-11 1-249-437-11 1-249-415-11 1-249-417-11 1-249-419-11 1-249-421-11 1-249-429-11 1-249-409-11 1-249-409-11

CARBON CARBON CARBON CARBON CARBON CARBON CARBON CARBON CARBON CARBON CARBON CARBON CARBON CARBON CARBON

1/4W F 1/4W 1/4W 1/4W F 1/4W F 1/4W 1/4W 1/4W 1/4W 1/4W F F F F

************************************************************** * 1-661-459-11 JACK BOARD ********** 4-962-200-01 PLATE (TR), GROUND < CAPACITOR > C113 C213 C501 C504 C506 C511 1-162-290-31 1-162-290-31 1-161-494-00 1-164-159-11 1-162-282-31 1-164-159-11 CERAMIC CERAMIC CERAMIC CERAMIC CERAMIC CERAMIC 470PF 470PF 0.022uF 0.1uF 100PF 0.1uF 50V 50V 25V 50V 10% 50V 50V (EXCEPT US,CND,E) 10% 10%

*

1-249-409-11 CARBON 1-249-413-11 CARBON < SWITCH >

1/4W F 1/4W F

S701

1-572-184-11 SWITCH, TACTILE (POWER)

-- 58 --

JACK
Ref. No. Part No. Description < CONNECTOR > CN501 CN502 CN503 * CN504 1-770-724-11 1-770-724-11 1-580-230-11 1-568-951-11 CONNECTOR, BOARD TO BOARD 9P CONNECTOR, BOARD TO BOARD 9P PIN, CONNECTOR (PC BOARD) 2P PIN, CONNECTOR 2P < DIODE > D501 8-719-987-63 DIODE 1N4148M < JACK > J501 * J502 * J503 1-770-719-11 JACK, PIN 2P (LINE OUT) 1-764-188-11 JACK (SMALL TYPE)(DIA. 3.5)(CONTROL A1) 1-764-188-11 JACK (SMALL TYPE)(DIA. 3.5)(CONTROL A1) < COIL > ! L501 1-421-915-11 COIL, LINE FILTER < TRANSISTOR > Q502 8-729-620-05 TRANSISTOR 2SC2603-EF < RESISTOR > R116 R216 R502 R504 R505 R506 1-249-409-11 1-249-409-11 1-249-429-11 1-249-425-11 1-249-429-11 CARBON CARBON CARBON CARBON CARBON 220 220 10K 4.7K 10K 10 5% 5% 5% 5% 5% 5% 1/4W F 1/4W F 1/4W 1/4W F 1/4W 1/4W F Q601 D601 D602 Remark Ref. No. Part No.

JOG
Description < DIODE >

L.MOTOR

L.SW
Remark

8-719-301-49 DIODE SEL2810A-CD (P) 8-719-303-02 DIODE SEL2510C-D (·) < IC >

IC601

8-759-373-49 IC NJL54H400 < TRANSISTOR > 8-729-900-89 TRANSISTOR DTC144ES < RESISTOR >

R601 R602 R603 R604 R721 R722 R723 R724 R725 R726

1-249-415-11 1-249-407-11 1-247-807-31 1-247-807-31 1-249-415-11 1-249-417-11 1-249-419-11 1-249-421-11 1-247-843-11 1-249-427-11

CARBON CARBON CARBON CARBON CARBON CARBON CARBON CARBON CARBON CARBON < JOG SWITCH >

680 150 100 100 680 1K 1.5K 2.2K 3.3K 6.8K

5% 5% 5% 5% 5% 5% 5% 5% 5% 5%

1/4W F 1/4W F 1/4W 1/4W 1/4W F 1/4W 1/4W 1/4W 1/4W 1/4W F F F F

RE601

1-762-717-11 SWITCH, JOG (DISC) < SWITCH >

1-249-393-11 CARBON < SWITCH >

S501 ! S502

1-762-151-11 SWITCH, SLIDE (COMMAND MODE) 1-572-675-11 SWITCH, POWER VOLTAGE CHANGE (VOLTAGE SELECTOR)(E,PX) < TRANSFORMER >

S711 S721 S722 S723 S724 S725 S726 S727

1-572-184-11 1-572-184-11 1-572-184-11 1-572-184-11 1-572-184-11

SWITCH, TACTILE (ENTER) SWITCH, TACTILE (p) SWITCH, TACTILE (P) SWITCH, TACTILE (·) SWITCH, TACTILE ()

1-572-184-11 SWITCH, TACTILE (±) 1-572-184-11 SWITCH, TACTILE (CHECK) 1-572-184-11 SWITCH, TACTILE (CLEAR)

! T501 ! T501 ! T501

1-429-670-11 TRANSFORMER, POWER (US,CND) 1-429-671-11 TRANSFORMER, POWER (AEP,G,UK,AUS,SP) 1-429-672-11 TRANSFORMER, POWER (E,PX)

************************************************************** * 1-661-465-11 L. MOTOR BOARD ************** < MOTOR >

************************************************************** * A-4699-036-A JOG BOARD, COMPLETE ******************** < CAPACITOR > C601 1-124-584-00 ELECT < CONNECTOR > < SWITCH > * CN601 1-568-862-11 SOCKET, CONNECTOR 19P S801 1-571-300-21 SWITCH, ROTARY (LOADING DET.) 100uF 20% 10V

M802

A-4604-847-A MOTOR ASSY (LOADING)

************************************************************** * 1-661-467-11 L.SW BOARD **********

**************************************************************

-- 59 --

The components identified by mark ! or dotted line with mark ! are critical for safety. Replace only with part number specified.

Les composants identifiés par une marque ! sont critiques pour la sécurité. Ne les remplacer que par une piéce portant le numéro spécifié.

LUMINOUS
Ref. No. * Part No.

MAIN
Description Remark Ref. No. C333 C334 C335 C336 C337 C339 C340 C351 C352 C361 C362 C366 C371 C700 C710 C720 Part No. Description 100uF 0.1uF 0.1uF 8.2PF 8.2PF 0.1uF 100uF 0.1uF 0.1uF 0.1uF 0.1uF 0.1uF 0.1uF 0.01uF 0.01uF 0.01uF 20% Remark 10V 50V 50V 50V 50V 50V 16V 50V 50V 50V 50V 50V 50V 16V 16V 16V 1-126-052-11 ELECT 1-164-159-11 1-164-159-11 1-162-198-31 1-162-198-31 1-164-159-11 1-126-052-11 1-136-165-00 1-164-159-11 1-136-165-00 1-164-159-11 1-164-159-11 1-136-165-00 1-162-306-11 1-162-306-11 1-162-306-11 CERAMIC CERAMIC CERAMIC CERAMIC CERAMIC ELECT FILM CERAMIC FILM CERAMIC CERAMIC FILM CERAMIC CERAMIC CERAMIC < CONNECTOR > 100PF 47PF 47PF 0.0012uF 4700PF 100uF 100PF 47PF 47PF 0.0012uF 4700PF 100uF 3300uF 1000uF 100uF 22uF 4.7uF 100uF 4.7uF 470uF 4.7uF 4.7uF 470uF 0.022uF 100uF 0.022uF 47uF 47uF 0.022uF 33PF 100uF 22PF 100uF 0.1uF 10% 5% 5% 5% 5% 20% 10% 5% 5% 5% 5% 20% 20% 20% 20% 20% 20% 20% 20% 20% 20% 20% 20% 20% 30% 20% 20% 30% 5% 20% 5% 20% 50V 50V 50V 50V 200V 10V 50V 50V 50V 50V 200V 10V 16V 16V 50V 35V 50V 16V 50V 10V 50V 50V 10V 25V 10V 25V 16V 16V 25V 50V 10V 50V 10V 50V CN301 CN302 * CN303 CN304 * CN305 * CN306 CN307 * CN308 1-770-728-11 1-770-728-11 1-568-839-11 1-506-468-11 1-568-955-11 CONNECTOR, BOARD TO BOARD 9P CONNECTOR, BOARD TO BOARD 9P SOCKET, CONNECTOR 23P PIN, CONNECTOR 3P PIN, CONNECTOR 6P

1-661-468-11 LUMINOUS BOARD ************** 4-976-473-01 HOLDER (LED-S) < DIODE > D801 8-719-055-84 DIODE GL-528VS1

*

10% 10%

************************************************************** * A-4699-023-A MAIN BOARD, COMPLETE (US,CND) ****************************** A-4699-024-A MAIN BOARD, COMPLETE ********************* (AEP,G,UK,E,AUS,PX,SP) 7-685-871-01 SCREW +BVTT 3X6 (S) < CAPACITOR > C102 C103 C104 C106 C107 C108 C202 C203 C204 C206 C207 C208 C301 C302 C303 C304 C305 C306 C307 C308 C309 C310 C311 C316 C317 C318 C319 C320 C322 C327 C328 C330 C331 C332 1-162-282-31 1-162-215-31 1-162-215-31 1-130-472-00 1-106-359-00 1-126-052-11 1-162-282-31 1-162-215-31 1-162-215-31 1-130-472-00 1-106-359-00 1-126-052-11 1-128-489-11 1-124-360-00 1-124-122-11 1-126-851-11 1-126-163-11 1-126-101-11 1-126-163-11 1-124-472-11 1-126-163-11 1-126-163-11 1-124-472-11 1-161-494-00 1-126-052-11 1-161-494-00 1-126-022-11 1-126-022-11 1-161-494-00 1-162-211-31 1-126-052-11 1-162-207-31 1-126-052-11 1-164-159-11 CERAMIC CERAMIC CERAMIC MYLAR MYLAR ELECT CERAMIC CERAMIC CERAMIC MYLAR MYLAR ELECT ELECT ELECT ELECT ELECT ELECT ELECT ELECT ELECT ELECT ELECT ELECT CERAMIC ELECT CERAMIC ELECT ELECT CERAMIC CERAMIC ELECT CERAMIC ELECT CERAMIC

20% 5% 5%

*

5% 30% 30% 30%

1-568-951-11 PIN, CONNECTOR 2P 1-568-802-11 SOCKET, CONNECTOR 19P 1-568-951-11 PIN, CONNECTOR 2P < DIODE >

D301 D302 D303 D304 D305 D306 D307 D308 D310 D311 D312 D313 D315 D316

8-719-210-21 8-719-210-21 8-719-210-21 8-719-210-21 8-719-109-93 8-719-024-99 8-719-987-63 8-719-987-63 8-719-987-63 8-719-987-63 8-719-109-85 8-719-987-63 8-719-110-60 8-719-109-84

DIODE DIODE DIODE DIODE DIODE DIODE DIODE DIODE DIODE DIODE DIODE DIODE DIODE DIODE < IC >

11EQS04 11EQS04 11EQS04 11EQS04 RD6.2ESB2 11ES2-NTA2B 1N4148M 1N4148M 1N4148M 1N4148M RD5.1ES-B2 1N4148M RD24ES-B RD5.1ES-B1

IC301 IC302 IC303 IC304 IC305 IC307 IC308 IC309

8-759-330-29 8-759-821-93 8-752-872-59 8-759-822-38 8-759-634-51

IC IC IC IC IC

LA5616 LA5601 CXP84332-028Q LA6510 M5218AP

8-759-362-47 IC CXD8567AM 8-759-634-51 IC M5218AP 8-759-634-51 IC M5218AP

-- 60 --

MAIN
Ref. No. Part No. Description < COIL > L304 1-412-297-11 INDUCTOR 3.3uH < TRANSISTOR > Q101 Q102 Q201 Q202 Q301 Q302 Q303 Q304 Q305 Q306 8-729-141-26 8-729-141-26 8-729-141-26 8-729-141-26 8-729-140-97 8-729-119-76 8-729-900-65 8-729-900-65 8-729-900-65 8-729-119-76 TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR < RESISTOR > R101 R102 R103 R104 R105 R106 R108 R109 R110 R111 R112 R113 R115 R201 R202 R203 R204 R205 R206 R208 R209 R210 R211 R212 R213 R215 R301 R302 R303 R304 R306 R307 R308 R309 R310 1-249-436-11 1-249-436-11 1-249-431-11 1-249-431-11 1-249-437-11 1-249-437-11 1-249-419-11 1-249-419-11 1-249-441-11 1-249-409-11 1-249-409-11 1-249-393-11 1-249-425-11 1-249-436-11 1-249-436-11 1-249-431-11 1-249-431-11 1-249-437-11 1-249-437-11 1-249-419-11 1-249-419-11 1-249-441-11 1-249-409-11 1-249-409-11 1-249-393-11 1-249-425-11 1-249-431-11 1-249-425-11 1-249-429-11 1-249-438-11 1-247-807-31 1-247-807-31 1-249-435-11 1-249-429-11 1-249-425-11 CARBON CARBON CARBON CARBON CARBON CARBON CARBON CARBON CARBON CARBON CARBON CARBON CARBON CARBON CARBON CARBON CARBON CARBON CARBON CARBON CARBON CARBON CARBON CARBON CARBON CARBON CARBON CARBON CARBON CARBON CARBON CARBON CARBON CARBON CARBON 39K 39K 15K 15K 47K 47K 1.5K 1.5K 100K 220 220 10 4.7K 39K 39K 15K 15K 47K 47K 1.5K 1.5K 100K 220 220 10 4.7K 15K 4.7K 10K 56K 100 100 33K 10K 4.7K 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 1/4W 1/4W 1/4W 1/4W 1/4W 1/4W 1/4W F 1/4W F 1/4W 1/4W F 1/4W F 1/4W F 1/4W F 1/4W 1/4W 1/4W 1/4W 1/4W 1/4W 1/4W F 1/4W 1/4W 1/4W 1/4W 1/4W F F F F 2SC3622A-LK 2SC3622A-LK 2SC3622A-LK 2SC3622A-LK 2SB734-34 2SA1175-HFE DTA144ES DTA144ES DTA144ES 2SA1175-HFE Remark Ref. No. R311 R312 R316 R317 R318 R319 R321 R322 R323 R324 R325 R326 R327 R329 R330 R331 R332 R333 R334 R335 R336 R337 R338 R339 R340 R342 R351 R352 R353 R354 R355 R356 R357 R358 R361 R362 R363 R364 R365 R366 R367 R368 R373 R374 R375 R376 R377 R378 R385 R700 R710 R720 Part No. 1-247-843-11 1-249-429-11 1-249-429-11 1-249-429-11 1-249-429-11 1-249-429-11 1-249-417-11 1-249-417-11 1-249-417-11 1-249-411-11 1-249-424-11 1-247-807-31 1-249-411-11 1-249-441-11 1-249-441-11 1-249-425-11 1-249-441-11 1-249-425-11 1-249-425-11 1-249-429-11 1-249-429-11 1-249-421-11 1-249-417-11 1-249-417-11 1-249-417-11 1-249-429-11 1-249-441-11 1-249-441-11 1-247-860-11 1-249-431-11 1-249-382-11 1-249-382-11 1-247-883-00 1-249-393-11 1-247-885-00 1-247-885-00 1-247-860-11 1-249-431-11 1-249-382-11 1-249-382-11 1-247-883-00 1-249-393-11 1-249-427-11 1-247-843-11 1-249-439-11 1-249-427-11 1-249-427-11 1-249-417-11 1-249-429-11 1-249-427-11 Description CARBON CARBON CARBON CARBON CARBON CARBON CARBON CARBON CARBON CARBON CARBON CARBON CARBON CARBON CARBON CARBON CARBON CARBON CARBON CARBON CARBON CARBON CARBON CARBON CARBON CARBON CARBON CARBON CARBON CARBON CARBON CARBON CARBON CARBON CARBON CARBON CARBON CARBON CARBON CARBON CARBON CARBON CARBON CARBON CARBON CARBON CARBON CARBON CARBON CARBON 3.3K 10K 10K 10K 10K 10K 1K 1K 1K 330 3.9K 100 330 100K 100K 4.7K 100K 4.7K 4.7K 10K 10K 2.2K 1K 1K 1K 10K 100K 100K 16K 15K 1.2 1.2 150K 10 180K 180K 16K 15K 1.2 1.2 150K 10 6.8K 3.3K 68K 6.8K 6.8K 1K 10K 6.8K 6.8K 6.8K 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% Remark 1/4W 1/4W 1/4W 1/4W 1/4W 1/4W 1/4W F 1/4W F 1/4W F 1/4W 1/4W F 1/4W 1/4W 1/4W 1/4W 1/4W F 1/4W 1/4W F 1/4W F 1/4W 1/4W 1/4W 1/4W 1/4W 1/4W 1/4W 1/4W 1/4W 1/4W 1/4W 1/6W F 1/6W F 1/4W 1/4W F 1/4W 1/4W 1/4W 1/4W 1/6W F 1/6W F 1/4W 1/4W F 1/4W F 1/4W 1/4W 1/4W 1/4W 1/4W 1/4W 1/4W F F F F

F F F F

1/4W F 1/4W 1/4W F 1/4W 1/4W 1/4W 1/4W 1/4W 1/4W 1/4W F

1-249-427-11 CARBON 1-249-427-11 CARBON

1/4W F 1/4W F

-- 61 --

MAIN
Ref. No.

RAY-CATCHER
Part No. Description < VIBRATOR >

T.MOTOR
Remark

T.SENS
Ref. No. Part No. Description Remark

X301 X302

1-579-175-11 VIBRATOR, CERAMIC (10MHz) 1-767-155-11 VIBRATOR, CRYSTAL (33.8688MHz)

! CNP901 1-696-845-11 CORD, POWER (AUS) ! CNP901 1-751-529-11 CORD, POWER (UK) FL701 M101 M102 M801 M802 ! T501 ! T501 ! T501 1-517-517-11 X-2626-234-1 X-2625-769-1 A-4604-847-A A-4604-847-A INDICATOR TUBE, FLUORESCENT T.T CHASSIS ASSY (MG)(K)(SPINDLE) MOTOR GEAR ASSY (MB)(RP)(SLED) MOTOR ASSY, LOADING (TABLE) MOTOR ASSY, LOADING (LOADING)

************************************************************** * 1-661-469-11 RAY-CATCHER BOARD ***************** 4-985-300-01 HOLDER (P-T) < TRANSISTOR > Q801 8-729-926-31 PHOTO TRANSISTOR PT483F1S

*

1-429-670-11 TRANSFORMER, POWER (US,CND) 1-429-671-11 TRANSFORMER, POWER (AEP,G,UK,AUS,SP) 1-429-672-11 TRANSFORMER, POWER (E,PX)

************************************************************** ACCESSORIES & PACKING MATERIALS ******************************* 1-473-800-11 1-558-271-11 1-777-172-11 3-707-584-21 3-810-765-11 REMOTE COMMANDER (RM-DX200) CORD, CONNECTION (AUDIO 108cm) CORD, CONNECTION (CONTROL-A1)(CND) COVER, BATTERY (FOR RM-DX200) MANUAL,COMMONNESS INSTRUCTION (FOR CONTROL-A1) (ENGLISH)(US,AUS)

************************************************************** * 1-661-466-11 T.MOTOR BOARD ************* < MOTOR > M801 A-4604-847-A MOTOR ASSY (TABLE)

************************************************************** * 1-661-470-11 T.SENS BOARD ************ < CONNECTOR > CN802 CN803 1-506-481-11 PIN, CONNECTOR 2P 1-506-481-11 PIN, CONNECTOR 2P < IC > IC801 IC802 IC803 8-749-924-18 IC PHOTO INTERRUPTER RPI-1391 8-749-924-18 IC PHOTO INTERRUPTER RPI-1391 8-749-924-18 IC PHOTO INTERRUPTER RPI-1391 < RESISTOR > R801 R802 R803 R804 1-249-416-11 1-249-416-11 1-249-416-11 1-249-415-11 CARBON CARBON CARBON CARBON 820 820 820 680 5% 5% 5% 5% 1/4W 1/4W 1/4W 1/4W F F F F * * * * * * *

3-810-765-21 MANUAL,COMMONNESS INSTRUCTION (FOR CONTROL-A1) (ENGLISH,FRENCH,GERMAN,SPANISH,DUTCH, SWEDISH,ITALIAN,PORTUGUESE,CHINESE) (EXCEPT US,AUS) 3-856-765-11 MANUAL, INSTRUCTION (ENGLISH,FRENCH,SPANISH,SWEDISH) (EXCEPT US,AUS) 3-856-765-21 MANUAL, INSTRUCTION (ENGLISH)(US,AUS) 3-856-765-31 MANUAL, INSTRUCTION (CHINESE)(SP) 3-856-765-41 MANUAL, INSTRUCTION (GERMAN,DUTCH,ITALIAN,PORTUGUESE) (AEP,G) 4-984-086-01 4-983-337-01 4-983-803-01 4-983-804-01 4-983-805-01 BOOKLET (100) INDIVIDUAL, CARTON (SP) CUSHION INDIVIDUAL, CARTON (US,CND) INDIVIDUAL, CARTON (AEP,G)

4-983-806-01 INDIVIDUAL, CARTON (UK) 4-985-680-01 INDIVIDUAL, CARTON (AUS) 4-986-415-01 INDIVIDUAL, CARTON (E,PX)

************************************************************** ************************************************************** MISCELLANEOUS ************* 4 5 ! 12 304 ! 306 1-773-183-11 1-777-345-11 1-569-007-11 1-769-069-11 8-848-376-01 WIRE (FLAT TYPE) (23 CORE) WIRE (FLAT TYPE) (19 CORE) ADAPTOR, CONVERSION 2P (E,PX) WIRE (FLAT TYPE) (16 CORE) OPTICAL PICK-UP BLOCK KSS-213B/S-N

! CNP901 1-575-042-21 CORD, POWER (US,CND) ! CNP901 1-575-651-21 CORD, POWER (AEP,G,SP) ! CNP901 1-696-027-11 CORD, POWER (E,PX)

-- 62 --

The components identified by mark ! or dotted line with mark ! are critical for safety. Replace only with part number specified.

Les composants identifiés par une marque ! sont critiques pour la sécurité. Ne les remplacer que par une piéce portant le numéro spécifié.

Ref. No.

Part No.

Description ************* HARDWARE LIST *************

Remark

#1 #2 #3 #4 #5 #6 #7 #8 #9 #10 #11 #12 #13 #15 #16 #17

7-685-646-79 7-685-871-01 7-685-647-79 7-685-534-19 7-685-871-09 7-682-947-01 7-682-548-04 7-624-111-04 7-624-106-04 7-621-772-20 7-682-552-09 7-621-775-00 7-621-772-30 7-624-109-04 7-621-775-20

SCREW +BVTP 3X8 TYPE2 N-S SCREW +BVTT 3X6 (S) SCREW +BVTP 3X10 TYPE2 N-S SCREW +BTP 2.6X8 TYPE2 N-S SCREW +BVTT 3X6 (S) SCREW +PSW 3X6 SCREW +BVTT 3X8 (S) STOP RING 7.0, TYPE -E STOP RING 3.0, TYPE -E SCREW +B 2X5 SCREW +B 3X16 SCREW +B 2.6X3 SCREW +B 2X6 STOP RING 5.0, TYPE -E SCREW +B 2.6X5

7-682-255-15 SCREW +P 2X3

-- 63 --

CDP-CX200

Sony Corporation
9-960-723-11
Home A&V Products Company

English 96G0992-1 Printed in Japan © 1996.7 Published by Quality Engineering Dept. (Shibaura)

-- 64 --