Text preview for : hfe_pioneer_vsx-s500-k_service_en_rrv4228.pdf part of Pioneer hfe pioneer vsx-s500-k service en rrv4228 Pioneer Audio VSX-S500-K hfe_pioneer_vsx-s500-k_service_en_rrv4228.pdf



Back to : hfe_pioneer_vsx-s500-k_se | Home

ORDER NO.
RRV4228
VSX-S500-K

AUDIO/VIDEO MULTI-CHANNEL RECEIVER


VSX-S500-K
THIS MANUAL IS APPLICABLE TO THE FOLLOWING MODEL(S) AND TYPE(S).
Model Type Power Requirement Remarks

VSX-S500-K SYXCN8 AC 220 V to 230 V

VSX-S500-K DLXCN AC 220 V to 240 V




This service manual should be used together with the following manual(s).
Model No. Order No. Remarks

VSX-S300-K/SYXCN8 RRV4197



For SPECIFICATIONS and PANEL FACILITIES, refer to the operating instructions.




K-ZZZ SEPT. 2011 Printed in Japan
1 2 3 4

1. CONTRAST OF MISCELLANEOUS PARTS
NOTES: Parts marked by "NSP" are generally unavailable because they are not in our Master Spare Parts List.
A The mark found on some component parts indicates the importance of the safety factor of the part.
Therefore, when replacing, be sure to use parts of identical designation.
Screws adjacent to mark on product are used for disassembly.
For the applying amount of lubricants or glue, follow the instructions in this manual.
(In the case of no amount instructions, apply as you think it appropriate.)
Nos. indicate the pages and Nos. in the service manual for the base model.
When ordering resistors, first convert resistance values into code form as shown in the following examples.
Ex.1 When there are 2 effective digits (any digit apart from 0), such as 560 ohm and 47k ohm (tolerance is shown by J=5%,
and K=10%).
56 x 101 561 RD1/4PU 5 6 1 J
47 x 103 473 RD1/4PU 4 7 3 J
R50 RN2H R 5 0 K
1R0 RS1P 1 R 0 K
B Ex.2 When there are 3 effective digits (such as in high precision metal film resistors).
562 x 101 5621 RN1/4PC 5 6 2 1 F


CONTRAST TABLE
VSX-S300-K/SYXCN8, VSX-S500-K/SYXCN8 and VSX-S500-K/DLXCN are constructed the same except for the following:
Mark No. Symbol and Description VSX-S300-K/SYXCN8 VSX-S500-K/SYXCN8 VSX-S500-K/DLXCN Remarks
PCB ASSEMBLIES
NSP 1..PCB TTL Assy D-AMP 7025HK1022011-IL 7025HK1023011-IL 7025HK1023011-IL
P48-1 2..D-AMP Assy 7028070661020-IL 7028070661010-IL 7028070661010-IL
2..USB Assy Not used 7028070662010-IL 7028070662010-IL No. 51
C
NSP 1..PCB TTL Assy FRONT 7025HK1022014-IL 7025HK1023014-IL 7025HK1023014-IL
P48-3 2..FRONT Assy 7028070651020-IL 7028070651010-IL 7028070651010-IL
P48-4 2..POWER Assy 7028070652020-IL 7028070652010-IL 7028070652010-IL
P48-5 2..MIC Assy 7028070653020-IL 7028070653010-IL 7028070653010-IL

NSP 1..PCB TTL Assy MAIN 7025HK1022040-IL 7025HK1023030-IL 7025HK1023010-IL
P48-6 2..MAIN Assy 7028070671070-IL 7028070671030-IL 7028070671010-IL

NSP 1..PCB TTL Assy TUNER 7025HK1022043-IL 7025HK1023033-IL 7025HK1023013-IL
P48-10 2..TUNER Assy 7028070691040-IL 7028070691020-IL 7028070691010-IL

NSP 1..PCB TTL Assy D-MAIN 7025HK1022046-IL 7025HK1023036-IL 7025HK1023036-IL
D
P48-13 2..D-MAIN Assy 7028070684010-IL 7028070683010-IL 7028070683010-IL

PACKING SECTION
P45-6 Operating Instructions Not used Not used 5707000005680-IL
P45-7 Safety Brochure 5707000005850-IL 5707000005850-IL Not used
P45-8 Quick Start Guide 5707000005631-IL 5707000005640-IL Not used
NSP P45-9 Warranty Card EU ARY7127 ARY7127 Not used
P45-13 Box ,Gift 6007211890030-IL 6007211890060-IL 6007211890040-IL

P45-15 Disk CD Manual 6517000000330-IL 6517000000341-IL Not used

EXTERIOR SECTION
E
P48-22 Speaker Sheet 1210211552000-IL 1210211542000-IL 1210211542000-IL
P48-27 Front Panel 3067215231100-IL 3067215231000-IL 3067215231000-IL
P48-28 Back Chassis 3207213916120-IL 3207213916020-IL 3207213916000-IL
P48-29 Foot 4000210661000-IL 4007210661000-IL 4007210661000-IL
P48-38 Knob 5080212461000-IL Not used Not used

P48-38 Knob Assy S500SY Not used 5088212508000-IL 5088212508000-IL
P48-39 Button 5090213741100-IL Not used Not used
P48-39 Standby Button Clear Not used 5098214551000-IL 5098214551000-IL
Cushion Not used 4050213865000-IL 4050213865000-IL No. 52
License Label S500 Not used 5507000007530-IL 5507000007530-IL No. 53
Notes : The numbers in the remarks column correspond to the numbers on the "EXPLODED VIEWS".
F
For PCB ASSEMBLIES, Refer to "CONTRAST OF PCB ASSEMBLIES", "PCB PARTS LIST", "2. SCHEMATIC DIAGRAM", and "3. PCB
CONNECTION DIAGRAM".



2 VSX-S500-K
1 2 3 4
5 6 7 8

EXPLODED VIEWS
EXTERIOR SECTION

A




B




C




D




I
E




PF




F




VSX-S500-K 3
5 6 7 8
1 2 3 4

CONTRAST OF PCB ASSEMBLIES

AF TUNER ASSY
A 7028070691040-IL, 7028070691020-IL and 7028070691010-IL are constructed the same except for the following:
Mark Symbol and Description 7028070691040-IL 7028070691020-IL 7028070691010-IL Remarks
IC129 Not used BD2226G BD2226G
IC130 REGULATOR IC Not used S-1170B50UC-OUJ S-1170B50UC-OUJ
JA150 CN,PLUG CONTACT Not used G480040040020-IL G480040040020-IL
CN124 CN,WAFER Not used L109012511510-IL L109012511510-IL
601 TUNER,FM/AM E903104100780-IL E903104100780-IL E903004100780-IL
The mounting positions of the additional parts are described in the circuit diagram and PCB diagram of the parent manual.


DF MAIN ASSY
7028070671070-IL, 7028070671030-IL and 7028070671010-IL are constructed the same except for the following:
B
Mark Symbol and Description 7028070671070-IL 7028070671030-IL 7028070671010-IL Remarks
IC108 Not used BU4052BCF BU4052BCF
IC110 MAIN Mi-Com 8952300000012-IL 8952300000051-IL 8952300000051-IL
Q160, Q161 Not used Not used J522104301210-IL
Q107 Not used Not used J520101411210-IL
X1002 CRYSTAL Not used Not used E80014R318080-IL
The mounting positions of the additional parts are described in the circuit diagram and PCB diagram of the parent manual.


FF D-MAIN ASSY
7028070684010-IL and 7028070683010-IL are constructed the same except for the following:
C
Mark Symbol and Description 7028070684010-IL 7028070683010-IL Remarks
NSP IC1326 Not used J080756000010-IL
IC1304 Not used J126111710011-IL
IC9300 Not used J126108618080-IL
IC1327 Not used J040916100010-IL
IC1145, IC1147 Not used J048030030010-IL

IC1328 Not used J044341216430-IL
IC3011 Not used J045495400010-IL
NSP IC1329 Not used 8952300000080-IL
NSP IC1331 Not used J001441688310-IL
IC1312 Not used TC7WHU04FU
D

IC1302 Not used ADV7181CBSTZ-K
IC1311 Not used ABT1015-K
IC1316 SUB Mi-Com 8952300000021-IL 8952300000060-IL
Q1319, Q9120, Q9141 Not used J522101411210-IL
Q9119, Q9139 Not used J520101411210-IL

Q1318 Not used J500124200010-IL
Q1 Not used J520103S00210-IL
D1, D2 Not used K067012020020-IL
D10 Not used K005041480030-IL
D1362, D1367 Not used 1SR154-400
E
D9302 Not used UDZS5R1
X1302 CRYSTAL CHIP Not used E80527R000050-IL
CN1304 CN,WAFER Not used L109012521510-IL
CN9001 CN.WAFER 2.0mm Not used L102526800500-IL
JA1308 JACK,MODULAR Not used G4060RJ450120-IL

C1458, C1596, C1686, C1766 Not used D050221081200-IL
C1868 Not used D050221081200-IL
C1459 Not used D050471081200-IL
The mounting positions of the additional parts are described in the circuit diagram and PCB diagram of the parent manual.

F




4 VSX-S500-K
1 2 3 4
5 6 7 8



HF D-AMP ASSY
7028070661020-IL and 7028070661010-IL are constructed the same except for the following:
A
Mark Symbol and Description 7028070661020-IL 7028070661010-IL Remarks
JA602 TER,BOARD PUSH 8P G598801SA050Y-IL G614108V1010M-IL


IF FRONT ASSY
Although 7028070651020-IL and 7028070651010-IL are different in part number and they are NOT COMPATIBLE, they consist
of the same service components.


JF POWER ASSY
7028070652020-IL and 7028070652010-IL are constructed the same except for the following:
Mark Symbol and Description 7028070652020-IL 7028070652010-IL Remarks B
Q708 Not used J522102371210-IL
D703 LED(BLUE) Not used SLR343BC4T
The mounting positions of the additional parts are described in the circuit diagram and PCB diagram of the parent manual.


KF MIC ASSY
7028070653020-IL and 7028070653010-IL are constructed the same except for the following:
Mark Symbol and Description 7028070653020-IL 7028070653010-IL Remarks
JA701, JA702 JACK,D3.5 G401PJ354H70Y-IL G401PJ354H71Y-IL


LF POWER TRANS ASSY C

8208000920021-IL has no service parts.



PCB PARTS LIST
Mark No. Description Part No.


PF USB ASSY
SEMICONDUCTORS
D
IC 806 J126050000060-IL
D 7-9 K005041480030-IL
D 3603,3604 K067012020020-IL

MISCELLANEOUS
JA 3604 CN,PLUG CONTACT G480040040040-IL

CAPACITORS
C 5,3605 D050221081200-IL




E




F




VSX-S500-K 5
5 6 7 8
1 2 3 4

2. SCHEMATIC DIAGRAM
2.1 D-MAIN ASSY (5/6)
A
F 2/6
F 1/6




8 7 6 5 4 3 2 1
B
(BT656 FORMAT)




IC802
9 10 11 12 13 14 15 16




27MHz clock option
F 1/6




TO DMAIN_1
F 1/6




C
F 3/6
TO DMAIN_2
F 2/6




(Z8030)




D




NOTE : PLACE UNDER IP7560




UNDER IP7560



E NOTE : PLACE UNDER IP7560




(Z8030)


UNDER IP7560




UNDER IP7560




F



F 5/6F NOTE : PLACE UNDER IP7560




6 VSX-S500-K
1 2 3 4
5 6 7 8




A




F 6/6F




F 6/6F
B




P F CN703
C




TO DMAIN_2
F 2/6
D




LAN (10/100)
E




F 5/6F D-MAIN ASSY
(7028070683010-IL) F



F 5/6F
VSX-S500-K 7
5 6 7 8
1 2 3 4

2.2 D-MAIN ASSY (6/6)

A F 6/6F D-MAIN ASSY (7028070683010-IL)




B
F 5/6F




C
NOTE : PLACE UNPER DDR2 SDRAM




D




E




F



F 6/6F
8 VSX-S500-K
1 2 3 4
5 6 7 8




A




B




C




F 5/6F
D




E




F



F 6/6F
VSX-S500-K 9
5 6 7 8
1 2 3 4

2.3 USB ASSY

A
P F USB ASSY




R98

0
R97
(7028070662010-IL) -

D7




220/6.3-Z8157




C76 100N-K
KDS4148U




-
-
-
C75 -
100N-K




4




3
C3603

C3605
0 L10 C65




C74
C73
C61
220/6.3-Z8157
U020R2
D3605




FAN
U020R2




0
D3606




2
R3608 0 L6




7 6 5 4 3 2 1
100N-K
C3610

100P-J
R3609 0




5




1
C5
5 R96
4 3 2 1




R3610 0 100
R3607 0 IC806 BA05CC0WFP




100N-K
100P-J



10N-K
1N-J
6
D3604




0



0
C3608
U020R2
U020R2




15P C3609
100P-J
D3603




L8
-




L5
0
R3611 CN703
B

C72
C71
R3612 0




C70
C60
LUG706
C3611
C3612
15P




D8
KDS4148U
D9
KDS4148U




L CN244


F 5/6F CP2
C




PF PF
3. PCB CONNECTION DIAGRAM
3.1 USB ASSY

SIDE A SIDE A
D
PF USB ASSY




E

SIDE B SIDE B
PF USB ASSY
CN244
L
CN703



CP2
F




F



PF PF
10 VSX-S500-K
1 2 3 4
5 6 7 8

4. EACH SETTING AND ADJUSTMENT
4.1 UPDATING OF THE FIRMWARE
A
(4) How to Update the UBICOM firmware
[Preparation]
(1) Copy only the "s500_v*_**.ub" file that was released into the root directory of the USB memory device.
Note: The asterisks stand for digits of a version number.
(2) Connect the VIDEO output of this product to a TV so that you can easily recognize when rebooting is finished after
updating is completed.
[How to Update]
Character-string display
GUI
section on the FL display
1. Shift the main unit to Standby mode then plug the USB
memory device that contains the firmware file for B
updating into the main unit.
2. During Standby mode, hold the INPUT SELECTOR
button on the front panel of the main unit pressed for
about 5 seconds then while still holding the button
pressed, press the TV key on the remote control unit.
The main unit is turned ON then shifted to Update
(Special Booting) mode.
3. While "PLEASE WAIT/CONNECTING" is displayed on 1 2 3 4 5 6 7 8 9 10111213141516
the FL display, wait. P L E A S E WA I T
CONN E C T I NG
4. The firmware file for updating is loaded from the USB 1 2 3 4 5 6 7 8 9 10111213141516
memory device then developed in the UBICOM. U B I COM U PGR A D E C
A message to the effect that updating is in progress will MOD E OK
be displayed on the FL display and the GUI.
1 2 3 4 5 6 7 8 9 10111213141516

When updating is finished, the UBICOM will be automati- U B I COM U PGR A D E
cally rebooted. Let the unit do its work. F I L E S E A RCH
It takes about 5 minutes for rebooting. 1 2 3 4 5 6 7 8 9 10111213141516
U B I COM U PGR A D E
Note: NEVER turn the unit OFF while updating is in F I L E S E A RCH OK
progress. If you do, the unit cannot be recovered.
1 2 3 4 5 6 7 8 9 10111213141516
Programing device