Text preview for : UpdateMethodEU.pdf part of panasonic UpdateMethodEU panasonic Plasma TV TX-PR42G20 Firmware UpdateMethodEU.pdf
Back to : UpdateMethodEU.pdf | Home
Method of Software Version Up by SD card (1/4)
1. Conform the current version of the system software.
1 Select "Setup" in Main manu 2 Select "System Information" in "System Menu"
Press Menu button.
Press OK button.
n.
utto
Kb
s sO
Pre
3 Select "Software Version" display
Method of Software Version Up by SD card (2/4)
2. Power ON TV set. and insert the SD card for the update.
1
Enlarging
It takes max 30 seconds.
2
Enlarging
Press OK button.
3
Enlarging
Select "Yes" and press OK button.
Method of Software Version Up by SD card (3/4)
4
Enlarging
It takes about 5 minutes.
5
Enlarging
1. Please remove the SD card from TV set.
2. Please turn off the main power of the TV set.
3. Please turn on the main power of the TV set.
6
Enlarging
Method of Software Version Up by SD card (4/4)
It takes about 5 minute.
7
Black out.
It takes about 10 seconds.
8
Software successfully updated.
However, the message does not appear.
9 Conform the new version of the system software. Refer to page 1/4.