Text preview for : t_mode2.pdf part of panasonic t mode2 panasonic DVD-Video NV-VP33EF MAD0504002CE doc t_mode2.pdf
Back to : t_mode2.pdf | Home
Item Player mode and Function Display Cancellation
button combination method
DVD laser In STOP (no disc) mode, DVD laser drive current measurement Cancelled
drive current press PLAY (DVD) and DVD laser drive current is measured LDD Display 1 automatically
measurement OPEN buttons on the and the result is displayed together DVD laser current 5 seconds
player, and FUNCTIONS with the initial value stored in measurement mode later.
button on the remote EEPROM.
control unit. After the measurement, DVD laser Press STATUS Key
emission is kept on. It is turned off to select Display 1 or 2
when POWER key is switched off.
(It is also turned off when the primary
power is switched off.)
034032 Display 2
Measured current
Initial current
stored in EEPROM
The value denotes the current in decimal notation.
The above example shows the initial current is
34mA and the measured value is 32mA.
ADSC internal In STOP (no disc) mode, ADSC internal RAM data check Press STOP
RAM data press PLAY (DVD) and ADSC internal RAM data is read out A FB0 Display 1 or OPEN
check OPEN buttons on the and displayed. Adress button.
player, and EXIT RETURN Change the address with ADSC internal RAM
button on the remote CANCEL/RESET key operation to data check mode
control unit. show the data for 11 addresses.
Press STATUS Key
to select Display 1 or 2
A 0005 Display 2
RAM data for
specified adress
The value is shown in hexadicimal notation.
The above example shows the data in ADSC
adress A FB0 is A 0005.
Servo process In STOP (no disc) mode, Servo process display POWER
display press PLAY (DVD) and The servo process from STOP to OFF
FF buttons on the player, ACCESS is displayed.
and "7" button on the
remote control unit.
CD laser drive In STOP (no disc) mode, CD laser drive current measurement Cancelled
current press PLAY (DVD) and CD laser drive current is measured LDC Display 1 automatically
measurement FF buttons on the player, and the result is displayed together CD laser current 5 seconds
and FUNCTIONS button with the initial value stored in measurement mode later.
on the remote control unit. EEPROM.
After the measurement, CD laser Press STATUS Key
emission is kept on. It is turned off to select Display 1 or 2
when POWER key is switched off. (It
is also turned off when the primary
power is switched off.)
028026 Display 2
Measured current
Initial current stored
in EEPROM
The value denotes the current in decimal notation.
The above example shows the initial current is
28mA and the measured value is 26mA.
Version In STOP (no disc) mode, Version display srrr_xyzzz Cancelled
display press PLAY (DVD) and System controller release number automatically
OPEN buttons on the System controller model number 5 seconds
player, and "7" button on System controller generation later.
the remote control unit. Panel controller release number
Panel controller model number
Lighting of In STOP (no disc) mode, Lighting of display tube Repeat the
display tube press PLAY (DVD) and same
OPEN buttons on the operation.
player, and "9" button on
the remote control unit.