Text preview for : philips_hb935_150.pdf part of Philips philips hb935 150 Philips MicroWave HB935 philips_hb935_150.pdf
Back to : philips_hb935_150.pdf | Home
Sunstudio
HB935 /A
/B
/C
Philips Domestic Appliances and Personal Care
Service Manual
PRODUCT INFORMATION IMPORTANT
Versions: - Because of the brief high starting voltage, the appliance
/A : Sensitive for error problems. should be connected to a circuit protected with a 16A fuse.
/B : With solution for ERROR in the display. - HPA lamps only go on at a restart if they have cooled down
/C : With solution for ERROR in the display and/or sufficiently.
hum or bleep in the headphone. - Never touch the HPA lamps with your fingers. If necessary,
clean the lamps with a cloth moistened with some alcohol.
- This full-body tanning appliance is equipped with an - When a new HPA lamp is installed, this lamp may have
electronic power supply. This means that when the a different colour compared to the other lamp. This is
appliance is connected to the mains, the tanning or normal and will disappear after a short period of use.
relaxing functions are made visible by means of symbols - After repair, the glass filters should be free from fingerprints.
on the display. The set time is also shown on the display. If necessary clean the filters with some alcohol.
During the last minute of the set time, an accoustic - Never look directly into the light of an HPA lamp when it
signal sounds. is on without protective goggles.
- The UV lamps only burn in combination with the IR - Insufficient cooling