Text preview for : Uploading_NVM_content.pdf part of Philips Uploading NVM content Philips Symptom Cure 17-04-2004 References Uploading_NVM_content.pdf
Back to : Uploading_NVM_content.pdf | Home
The content of an NVM can be uploaded with ComPair by following these steps:
1) Start compare
2) First save the current NVM content.
3) Go to menu item Tools/compare Tools.../EEPROM Read/Write or click on
4) Click on "Read".
5) Fill in a description for the NVM content of the set and click on "OK".
During the downloading the process may not be interrupted by the technician.
6) Click on the "Save" button.
7) Fill in a filename and click on "Save".
8) Now the new NVM file can be uploaded.
9) Click on "Load".
10) Select the *.hex file you want to upload and click on "Open".
It is recommended that you load the NVM file from your local hard disc.
11) Click on "Write".
12) Click on "OK" and wait until the file is uploaded to the NVM and close ComPair.
During the downloading the process may not be interrupted by the technician.