Text preview for : 40pfh4009_88_dfu_eng.pdf part of Philips 40pfh4009 88 dfu eng Philips LCD TV 40PFH4009-88 User Manual 40pfh4009_88_dfu_eng.pdf
Back to : 40pfh4009_88_dfu_eng.pdf | Home
Register your product and get support at LED TV
www.philips.com/welcome
32PFH4009
32PFT4009
32PHH4009
32PHH4009
32PHT4009
40PFH4009
40PFT4009
40PFT4009
50PFH4009
50PFT4009
User Manual
Contents
1 Your new TV 3 12 Recording 30
1.1 Pause TV and recordings 3 12.1 What you need 30
1.2 EasyLink 3 12.2 Record a programme 30
12.3 Watch a recording 30
2 Setting up 4
2.1 Read safety 4 13 Settings 31
2.2 TV stand and wall mounting 4 13.1 Picture 31
2.3 Tips on placement 4 13.2 Game or computer 32
2.4 Power cable 4 13.3 Format and edges 32
2.5 Antenna cable 5 13.4 Sound 33
3 Connections 6 14 Specifications 36
3.1 Tips on connections 6 14.1 Environmental 36
3.2 EasyLink HDMI CEC 7 14.2 Reception for PxHxxx9 / PxTxxx9 36
3.3 Common interface - CAM 8 14.3 Display 37
3.4 Set-top box - STB 8 14.4 Power 37
3.5 Satellite receiver 8 14.5 Dimensions and weights_4009 37
3.6 Home Theatre System - HTS 9 14.6 Connectivity 38
3.7 Blu-ray Disc player 10 14.7 Multimedia 38
3.8 DVD player 10
3.9 Game console 11 15 Software 39
3.10 USB Hard Drive 11 15.1 Software update 39
3.11 USB flash drive 12 15.2 Software version 39
3.12 Camcorder 12 15.3 Open source software 39
3.13 Computer 12 15.4 Open source license 39
3.14 Headphones 13
16 Troubleshooting and support 58
4 Switch on 14 16.1 Troubleshooting 58
4.1 On or Standby 14 16.2 Register 59
16.3 Help 59
5 Remote control 15 16.4 Online help 59
5.1 Key overview 15 16.5 Consumer Care / Repair 59
5.2 IR sensor 15
5.3 Batteries 16 17 Safety and care 61
5.4 Cleaning 16 17.1 Safety 61
17.2 Screen care 62
6 TV channels 17
6.1 Watching TV channels 17 18 Terms of use, copyrights and licenses 63
6.2 Channel installation 20 18.1 Terms of use 63
18.2 Copyrights and licenses 63
7 TV guide 24
7.1 Using the TV guide 24 Index 65
7.2 Recordings 24
7.3 Receiving TV guide data 24
8 Sources 25
8.1 Sources list 25
8.2 From standby 25
8.3 EasyLink 25
9 Timers and clock 26
9.1 Sleep timer 26
9.2 Clock 26
9.3 Auto switch off 26
10 Your photos, videos and music 27
10.1 From a USB connection 27
11 Pause TV 29
11.1 Pause TV 29
2
1
Your new TV
1.1
Pause TV and recordings
If you connect a USB Hard Drive, you can pause and record a
broadcast from a digital TV channel.
Pause your TV and answer that urgent phone call or simply take
a break during a sports match, while the TV stores the broadcast
on the USB Hard Drive. You can start watching again later.
1.2
EasyLink
With EasyLink you can operate a connected device, like a Bluray
Disc player, with the remote control of the TV.
EasyLink uses HDMI CEC to communicate with the connected
devices.
3
2 meet safety standards according to the TV's weight. Also read
the safety precautions before positioning the TV.
Setting up TP Vision Europe B.V. bears no responsibility for improper
mounting or any mounting that results in accident or injury.
2.1
Read safety Wall mounting
Read the safety instructions first before you use the TV. Your TV is also prepared for a VESA-compliant wall
In Help, go to Safety and care > Safety. mount bracket (sold separately).
Use the following VESA code when purchasing the wall mount .
..
2.2 To fix the bracket securely, use screws with a length indicated in
the drawing.
TV stand and wall mounting
TV stand
You can find the instructions for mounting the TV stand in the
Quick Start Guide that came with the TV. In case you lost this
guide, you can download it from www.philips.com.
Use the product type number of the TV to look for the Quick
Start Guide to download.
Wall mounting - 42Pxx5199 - VESA MIS-F 200x200, M6
- 47Pxx5199 - VESA MIS-F 400x400, M6
Your TV is also prepared for a VESA-compliant wall - 55Pxx5199 - VESA MIS-F 400x400, M6
mount bracket (sold separately).
Caution
Use the following VESA code when purchasing the wall mount .
.. Wall mounting the TV requires special skills and should only be
To fix the bracket securely, use screws with a length indicated in performed by qualified personnel. The TV wall mounting should
the drawing. meet safety standards according to the TV's weight. Also read
the safety precautions before positioning the TV.
TP Vision Europe B.V. bears no responsibility for improper
mounting or any mounting that results in accident or injury.
2.3
Tips on placement
- Position the TV where light does not shine directly on the
screen.
- Position the TV up to 15 cm away from the wall.
- 23Pxx4009 - VESA MIS-F 75x75, M4 (Minimum 7.5, Maximum - The ideal distance to watch TV is 3 times its diagonal screen
8.5 mm) size. When seated, your eyes should be level with the centre of
- 32Pxx4009 - VESA MIS-F 100x100, M4 (Minimum 6.3 mm, the screen.
Maximum 11.7 mm)
- 40Pxx4009 - VESA MIS-F 200x200, M4 (Minimum 6.3 mm,
Maximum 11.7 mm)
- 50Pxx4009 - VESA MIS-F 400x400, M6 (Minimum 10,
Maximum 14 mm)
Caution
Wall mounting the TV requires special skills and should only be
performed by qualified personnel. The TV wall mounting should
4
2.4
Power cable
- Insert the power cable into the POWER connector on the
back of the TV.
- Make sure the power cable is securely inserted in the
connector.
- Make sure that the power plug, in the wall socket, is accessible
at all times.
- When you unplug the power cable, always pull the plug, never
pull the cable.
Although this TV has a very low standby power consumption,
unplug the power cable to save energy if you do not use the TV
for a long period of time.
2.5
Antenna cable
Insert the antenna plug firmly into the ANTENNA socket at the
back of the TV.
You can connect your own antenna or an antenna signal from
an antenna distribution system. Use an IEC Coax 75 Ohm RF
antenna connector.
Use this antenna connection for DVB-T and DVB-C input
signals.
5
3 EasyLink HDMI CEC
Connections If your devices are connected with HDMI and have EasyLink, you
can operate them with the TV remote control. EasyLink HDMI
CEC must be switched On on the TV and the connected
3.1 device.
Tips on connections DVI to HDMI
Use a DVI to HDMI adapter if your device only has a DVI
Connectivity guide connection. Use one of the HDMI connections and add an
Audio L/R cable (mini-jack 3.5mm) to Audio In for sound, on
Always connect a device to the TV with the highest quality
the back of the TV.
connection available. Also, use good quality cables to ensure a
good transfer of picture and sound. Copy protection
If you need help to connect several devices to the TV, you DVI and HDMI cables support HDCP (High-bandwidth Digital
can visit the Philips TV connectivity guide. The guide Content Protection). HDCP is a copy protection signal that
offers information on how to connect and which cables to use. prevents copying content from a DVD disc or Blu-ray Disc. Also
Go to www.connectivityguide.philips.com referred to as DRM (Digital Rights Management).
HDMI ARC
Antenna
HDMI 1 connection on the TV have HDMI ARC (Audio Return
If you have a Set-top box (a digital receiver) or Recorder, Channel). If the device, typically a Home Theatre System (HTS),
connect the antenna cables to run the antenna signal through also has the HDMI ARC connection, connect it to HDMI 1 on
the Set-top box and/or Recorder first before it enters the TV. In this TV. With the HDMI ARC connection, you do not need to
this way, the antenna and the Set-top box can send possible connect the extra audio cable that sends the sound of the TV
additional channels to the Recorder to record. picture to the HTS. The HDMI ARC connection combines both
signals.
In case you prefer to switch off ARC on the HDMI connections,
press and select Setup and press OK. Select TV
settings > Sound > Advanced > HDMI 1 - ARC.
Scart
SCART is a good quality connection. The SCART connection
can be used for CVBS and RGB video signals but cannot be used
for High Definition (HD) TV signals. The SCART connection
combines video and audio signals.
Use the SCART adapter cable to connect your device.
HDMI
HDMI CEC
An HDMI connection has the best picture and sound quality.
One HDMI cable combines video and audio signals. Use an
HDMI cable for High Definition (HD) or Full HD (FHD) TV
signals. For best signal quality transfer, use a High speed HDMI
cable and do not use an HDMI cable longer than 5 m.
6
respective owners.
Audio Out - Optical
Audio Out - Optical is a high quality sound connection. This
optical connection can carry 5.1 audio channels. If your device, Operate devices
typically a Home Theatre System (HTS), has no HDMI ARC
connection, you can use this connection with the Audio In - To operate a device connected to HDMI and set up with
Optical connection on the HTS. The Audio Out - Optical EasyLink, select the device - or its activity - in the list of TV
connection sends the sound from the TV to the HTS. connections. Press SOURCES, select a device connected to
an HDMI connection and press OK.
You can set the type of the audio out signal to fit the audio Once the device is selected, the TV remote control can control
capabilities of your Home Theatre System. the device. However and OPTIONS keys and some
other TV keys are not forwarded to the device.
If the sound does not match the video on screen, you can adjust
If the key you need is not on the TV remote control, you can
the audio to video synchronization.
select the key in the Options menu.
Press OPTIONS and select Controls in the menu bar. On
the screen, select the device key you need and press OK.
3.2
Some very specific device keys might not be available in the
EasyLink HDMI CEC Controls menu.
Note: Only devices that support EasyLink Remote
EasyLink Control function will respond to the TV remote control.
With EasyLink you can operate a connected device with the TV
remote control. EasyLink uses HDMI CEC (Consumer
Electronics Control) to communicate with the connected
devices. Devices must support HDMI CEC and must be EasyLink settings
connected with an HDMI connection.
The TV comes with all EasyLink settings switched on. You can
switch off any EasyLink setting independently.
EasyLink
To switch off EasyLink completely . . .
1. Press and select Setup and press OK.
2. Select TV settings > General settings > EasyLink.
EasyLink setup 3. Select EasyLink.
4. Select Off and press OK.
The TV comes with EasyLink switched on. Make sure that all 5. Press , repeatedly if necessary, to close the menu.
HDMI CEC settings are properly set up on the connected
EasyLink devices. EasyLink might not work with devices from EasyLink Remote Control
other brands.
If you want devices to communicate but you don't want to
HDMI CEC on other brands operate them with the TV remote control, you can switch off
EasyLink remote control separately.
The HDMI CEC functionality has different names on different You can control multiple HDMI-CEC compliant devices with
brands. Some examples are: Anynet, Aquos Link, Bravia Theatre your TV remote control.
Sync, Kuro Link, Simplink and Viera Link. Not all brands are fully
compatible with EasyLink. In the EasyLink settings menu, select EasyLink Remote
Control and select Off.
Example HDMI CEC branding names are property of their
7
One-touch play It may take a few minutes before the CAM is activated.
Removing the CAM will deactivate the broadcast service on TV.
When you play an HDMI-CEC compliant device, the TV If a CAM is inserted and subscription fees are paid, (connection
switches on from standby and switches to the correct source. methods can differ), you can watch the TV broadcast. The
One-touch standby inserted CAM is exclusively for your TV.
When you press on the TV remote control, the TV and all
HDMI-CEC compliant devices switch to standby mode. 3.4
System audio control
If you connect an HDMI-CEC compliant device that includes
Set-top box - STB
speakers through the HDMI ARC connector, you can choose to Use 2 antenna cables to connect the antenna to the Set-top box
hear the TV audio from those speakers instead of the TV (a digital receiver) and the TV.
speakers.
3.3
Common interface - CAM
CI+
This TV is ready for the CI+ Conditional Access.
With CI+ you can watch premium HD programmes, like movies
and sports, offered by digital TV broadcasters in your region.
These programmes are scrambled by the TV broadcaster and Next to the antenna connections, add an HDMI cable to
descrambled with a prepaid CI+ module. connect the Set-top box to the TV.
Digital TV broadcasters provide this CI+ module (Conditional Alternatively, you can use a SCART cable if the Set-top box has
Access Module - CAM) when you subscribe to their premium no HDMI connection.
programmes. These programmes have a high level of copy
Auto switch off
protection.
Switch off this automatic timer, if you only use the remote
Contact a digital TV broadcaster for more information on terms
control of the Set-top box. Do this to prevent the TV from
and conditions.
switching off automatically after a 4 hour period without a key
press on the remote control of the TV.
To switch off the Switch off timer, press and select Setup and
press OK.
Select TV settings > General settings > Auto switch off and
set the slider bar to Off.
CAM
Insert a CAM module 3.5
Switch off the TV before inserting a CAM.
Look on the CAM for the correct method of insertion. Incorrect
Satellite receiver
insertion can damage the CAM and TV. - Only for TVs with a built-in satellite tuner.
Connect the dish antenna cable to the Satellite receiver.
Use the Common Interface slot on the TV to insert the CAM
card.
With the front of the card facing to you, gently insert the CAM
as far as it will go.
Leave the card in the slot permanently.
8
Next to the antenna connection, add an HDMI cable to connect
the device to the TV.
Alternatively, you can use a SCART cable if the device has no
HDMI connection.
If the Home Theatre System has no HDMI ARC connection,
add an optical audio cable (Toslink) to send the sound of the TV
picture to the Home Theatre System.
Auto switch off
Switch off this automatic timer, if you only use the remote
control of the Set-top box. Do this to prevent the TV from
switching off automatically after a 4 hour period without a key
press on the remote control of the TV.
To switch off the Switch off timer, press and select Setup and
press OK.
Select TV settings > General settings > Auto switch off and
set the slider bar to Off.
Audio to video synchronisation (sync)
If the sound does not match the video on screen, you can set a
3.6 delay on most Home Theatre Systems with a disc player to
match the sound with the video.
Home Theatre System - HTS
Connect HTS Audio Out settings
Use an HDMI cable to connect a Home Theatre System (HTS)
to the TV. You can connect a Philips Soundbar or an HTS with a Audio Out delay
built-in disc player. With a Home Theatre System (HTS) connected to the TV, the
Alternatively, you can use a SCART cable if the device has no picture on TV and the sound from the HTS should be
HDMI connection. synchronised.
HDMI ARC Automatic audio to video sync
If your Home Theatre System has an HDMI ARC connection, With recent Philips Home Theatre Systems, the audio to video
you can use any HDMI connection on the TV to connect. With sync is automatically synchronised and always correct.
HDMI ARC, you do not need to connect the extra audio cable.
The HDMI ARC connection combines both signals. Audio sync delay
All HDMI connections on the TV can offer the Audio Return
For some Home Theatre Systems you might need to adjust the
Channel (ARC) signal. But once you connected the Home
audio sync delay to synchronise the audio to video. On the HTS,
Theatre System, the TV can only send the ARC signal to this
increase the delay value until there is a match between picture
HDMI connection.
and sound. A delay value of 180ms may be required. Read the
user manual of the HTS. With a delay value set up on the HTS,
you need to switch off Audio Out delay on the TV.
To switch off the Audio Out delay . . .
1. Press and select Setup and press OK.
2. Select TV settings > Sound > Advanced > Audio out delay.
3. Select Off and press OK.
4. Press , repeatedly if necessary, to close the menu.
9
Audio Out offset Problems with HTS sound
If you cannot set a delay on the Home Theatre System, you can
set the TV to sync the sound. You can set an offset that Sound with loud noise
compensates the time necessary for the Home Theatre System If you watch a video from a plugged in USB flash drive or
to process the sound of the TV picture. You can set the value in connected computer, the sound from your Home Theatre
steps of 1ms. Maximum setting is 12ms. The Audio out delay System might be distorted.
setting should be switched on.
1. Press and select Setup and press OK.
To synchronise the sound on the TV . . . 2. Select TV settings > Sound > Advanced > Audio out
1. Press and select Setup and press OK. format.
2. Select TV settings > Sound > Advanced > Audio out offset. No sound
3. Use the slider bar to set the sound offset and press OK.
4. Press , repeatedly if necessary, to close the menu. If you cannot hear the sound from the TV on your Home
Theatre System, check the following . . .
- Check if you connected the HDMI cable to a HDMI
Audio Out format ARC connection on the Home Theatre System. All HDMI
connections on the TV are HDMI ARC connections.
If you have a Home Theatre System (HTS)
with multichannel sound processing capabilities like Dolby - Check if the HDMI ARC setting on the TV is switched On.
Digital, DTS