Text preview for : c9smtm3.pdf part of panasonic c9smtm3 panasonic Audio SA-PT570EB PSG0901003CE doc c9smtm3.pdf
Back to : c9smtm3.pdf | Home
Item Key Operation
FL Display
Model Name Description Front Key
Micro-processor Micro-processor firmware version (Display 1) In STOP (no disc)
firmware version display & EEPROM checksum display. mode, press [STOP]
display & EEPROM checksum is only available button on the main unit,
EEPROM due to existence of EEPROM IC. and [7] button on the
checksum remote control unit.
display. Note: Condition 1/2/3 shows the state Cancelled automatically
of EEPROM IC. (Display 2) 5 seconds later.
FL Display sequence:
Display 1 2 3.
(Condition 1)
If the version of the EEPROM does not match,
[NG] is displayed.
(Condition 2)
(a) If there is NO EEPROM header string
OR
(b) If there is no EEPROM (no data is received
by Micro-processor), [NO] is displayed.
(Condition 3)
If the EEPROM version matches, checksum
[YYYY] is displayed.
(Display 3)
EEPROM Press [FL Display] button on
Opecon remote control unit for next
Checksum
Version page. (FL Display)
(If applicable,
refer below.)
Initialization Initialization. Press 'RETURN' button on
User settings are cancelled and player remote control.
is initialized to factory setting. In STOP (no disc)
It is necessary when after replacement mode, press [STOP]
of Micro-processor (DV5 LSI) IC, button on the main unit,
FLASH ROM IC (IC8651), EEPROM and [ 10] button on the
IC (IC8611) & DVD Module P.C.B. remote control unit.
Cancelled automatically
3 seconds later.
DVD To reset DVD Module P.C.B. While in initialization
Module P.C.B. This process is used when the DVD mode, press & hold
Reset Module P.C.B. or FLASH ROM [STOP] button on the main
IC is replaced with a new one. unit, follow by [OK] button
on the remote control unit.
Cancelled automatically
5 seconds later.