Text preview for : 7jcns1.pdf part of panasonic 7jcns1 panasonic Audio SA-PTX7EB MD0704019CE doc 7jcns1.pdf
Back to : 7jcns1.pdf | Home
These settings are used if you will connect this unit to a
Manually setting the DNS server
network.
Preparation In most cases, default settings can normally be used without
1 To display the picture turn on the television and select the making any changes.
appropriate video input to suit the connections to this unit. When setting an assigned DNS server from your ISP, perform
2 Press [ ]. the following settings.
After performing steps 1 4 ( left)
Common procedures 5 Press [ ] to select "TCP/IP 2" and press [ENTER].
1 Press [SETUP]. 6 Press [ ] to select "DNS Manual Setting" and
2 Press [ ] to select "Other Setup" and press [ENTER]. press [ENTER].
If "TCP/IP 1" is set to "IP Manual Setting", the "DNS Auto
3 Press [ ] to select "Network" and press [ ]. Setting" will not be displayed.
4 Press [ ] to select "Network Settings" and press 7 Press [ ] to select the item to be set and press
[ENTER]. [ENTER].
The network connection status is displayed.
DNS Manual Settin g
Netw ork Settin gs
Primar y DNS Ad dress 0. 0. 0. 0
TCP/IP 1 Auto Settin g
Secondar y DNS Ad dress 0. 0. 0. 0
TCP/IP 2 Auto Settin g
IP Ad dress
Connected to netw ork.
8 Enter numbers with the numbered buttons and press
Manually setting the IP address [ENTER].
Follow the instructions given by your ISP and enter the
In most cases, default settings can normally be used without
numbers.
making any changes.
The numeric input range is between 0 and 255.
When connecting this unit to a network and assigning a fixed
IP address, perform the following settings. Repeat steps 7 8, and enter numbers for other items.
After performing steps 1 4 ( above)
To return to the previous screen
5 Press [ ] to select "TCP/IP 1" and press [ENTER]. Press [RETURN].
6 Press [ ] to select "IP Manual Setting" and press To exit the screen
[ENTER]. Press [RETURN] several times.
7 Press [ ] to select the item to be set and press If you made an input mistake
Move the cursor with [ ] and make corrections with the
[ENTER].
numbered buttons.
IP Manual Settin g
To delete settings and use default settings
IP Ad dress 0. 0. 0. 0 Select "DNS Auto Setting" in step 6 and press [ENTER].
Subnet Mask 0. 0. 0. 0
Gateway 0. 0. 0. 0 To check the IP Address, etc.
After performing steps 1 4 ( left)
8 Enter numbers with the numbered buttons and press 5 Press [ ] to select "IP Address" and press [ENTER].
[ENTER].
IP Ad dress
After checking the specifications for your broadband
[MAC Ad dress] 00-00-00-00-00-00
router, enter each number. [IP Ad dress] ---.---.---.---
The numeric input range is between 0 and 255. [Subnet Mask] ---.---.---.---
[Gateway] ---.---.---.---
Repeat steps 7 8, and enter numbers for other items. [Primar y DNS Ad dress] ---.---.---.---
[Secondar y DNS Address] ---.---.---.---
To return to the previous screen
Press [RETURN]. To return to the previous screen
To exit the screen Press [RETURN].
Press [RETURN] several times. To exit the screen
If you made an input mistake Press [RETURN] several times.
Move the cursor with [ ] and make corrections with the
numbered buttons.
To delete settings and use default settings
Select "IP Auto Setting" in step 6 and press [ENTER].