Text preview for : PIONEER_FH-X830BHS_X730BS_X731BT_X730BT_X85BT_X89BT_CRT5823_[X].pdf part of Pioneer PIONEER FH-X830BHS X730BS X731BT X730BT X85BT X89BT CRT5823 [X] Pioneer Audio FH-X85BT X89BT PIONEER_FH-X830BHS_X730BS_X731BT_X730BT_X85BT_X89BT_CRT5823_[X].pdf
Back to : PIONEER_FH-X830BHS_X730BS | Home
ORDER NO.
CRT5823
FH-X830BHS/XNUC
CD RDS RECEIVER
FH-X830BHS /XNUC
FH-X730BS /XNUC
FH-X731BT /XNUC
FH-X730BT /XNEW5
FH-X785BT /XNES
FH-X789BT /XNID
This service manual should be used together with the following manual(s):
Model No. Order No. Mech. Module Remarks
CX-3287 CRT4759 S11.6STD CD Mech. Module : Circuit Descriptions, Mech. Descriptions, Disassembly
PIONEER CORPORATION 28-8, Honkomagome 2-chome, Bunkyo-ku, Tokyo 113-0021, Japan
PIONEER ELECTRONICS (USA) INC. P.O. Box 1760, Long Beach, CA 90801-1760, U.S.A.
PIONEER EUROPE NV Haven 1087, Keetberglaan 1, 9120 Melsele, Belgium
PIONEER ELECTRONICS ASIACENTRE PTE. LTD. 2 Jalan Kilang Barat, #07-01, Singapore 159346
PIONEER CORPORATION 2016
K-ZZZ MAY 2016 Printed in Japan
1 2 3 4
SAFETY INFORMATION
CAUTION
A This service manual is intended for qualified service technicians; it is not meant for the casual do-it-yourselfer.
Qualified technicians have the necessary test equipment and tools, and have been trained to properly and safely repair
complex products such as those covered by this manual.
Improperly performed repairs can adversely affect the safety and reliability of the product and may void the warranty.
If you are not qualified to perform the repair of this product properly and safely, you should not risk trying to do so
and refer the repair to a qualified service technician.
WARNING
This product may contain a chemical known to the State of California to cause cancer, or birth defects or
other reproductive harm.
Health & Safety Code Section 25249.6 - Proposition 65
B
Where in a manufacturer's service documentation, for example in circuit diagrams or lists
of components, a symbol is used to indicate that a specific component shall be replaced only
by the component specified in that documentation for safety reasons, the following symbol shall
be used:
- Safety Precautions for those who Service this Unit.
When checking or adjusting the emitting power of the laser diode exercise caution in order to get safe, reliable
results.
Caution:
1. During repair or tests, minimum distance of 13 cm from the focus lens must be kept.
C 2. During repair or tests, do not view laser beam for 10 seconds or longer.
CAUTION:
USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE
SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.
CAUTION Laser diode characteristics
This product is a class 1 laser product classi- Wave length : 785 nm to 814 nm
fied under the Safety of laser products, IEC
60825-1:2007.
Maximum output : 1 190