Text preview for : 7jueshc2.pdf part of panasonic 7jueshc2 panasonic Audio SA-PTX7EB MD0704019CE doc 7jueshc2.pdf
Back to : 7jueshc2.pdf | Home
Auto input switching VIERA Link Control only with TV's remote
When you switch the television input to TV tuner mode, this control (for "HDAVI Control 2")
unit will automatically switch to "TV Audio* ". You can control the disc menus of this unit with the TV's remote
* If you want to output digital audio, connect the optical cable control when using the "Music Collection", "DVD/CD", "FM",
(OI page 70) and select "DIGITAL IN" in "TV Audio Input" and "USB" source. When operating the TV's remote
menu (OI page 88). control, refer to the illustration below for operation buttons.
When you start playback on this unit, the television will
automatically switch to the HDMI input mode for this unit. 1 Select the operation menu by using the television menu
Also from the Start menu, the input mode will be switched. settings. (For details, refer to the operating instructions of
your television.)
Speaker control ENTER/
PLAY
You can select whether audio is output from this unit or the
television speakers by using the television menu settings. For
details, refer to the operating instructions of your television. RETURN
2 Select the desired item on the Start menu (OI page 24).
Home theater
Theater speakers are active.
When this unit is in standby mode, changing the television
speakers to theater speakers in the television menu will
automatically turn this unit on and select TV Audio* as the
source.
* If you want to output digital audio, connect the optical cable
(OI page 70) and select "DIGITAL IN" in "TV Audio Input"
menu (OI page 88).
The television speakers are automatically muted. If you select "Disc" in "Listen" or "Watch" on the Start
You can control the volume setting using the volume or mute menu
button on the TV s remote control. (The volume level is "VIERA Link" menu is displayed. Select the desired item.
displayed on this unit's FL display.)
To cancel muting, you can also use this unit's remote control
(OI page 90).
If you turn off this unit, television speakers will be
automatically activated.
TV
Television speakers are active. "TOP MENU": Shows a disc top menu (OI page 37)
The volume of this unit is set to "0". or program list (OI page 38).
This function works only when "DVD/CD" or "TV Audio" is "MENU": Shows a disc menu (OI page 36) or
selected as the source on this unit. playlist (OI page 38).
Audio output is 2-channel audio. "Control Panel": The basic operations for playback
Audio from the CD is not output from the television speakers discs are available.
while recording to the HDD. However, if "Listening while e.g., "DVD/CD"
Recording" is selected, audio will be output from this unit's
speakers. In this case, operate the volume settings with this
unit s remote control.
[Note]
Depending on the type of TV, the TV settings, or operations
performed on the TV, Speaker Control may be automatically
set to "Home theater".
[Note]
Depending on the menu, some button operations cannot be
performed from the TV's remote control.
"Control Panel" can be selected directly by using a button on
the TV's remote control (e.g. [SUB MENU]).
Depending on the situation, not only the VIERA Link menu, but
this unit's Start menu may be displayed as well. At this point,
select "Disc" by pressing [ ] (TV's remote control) and
selecting "Listen" or "Watch". After that, you can operate the
VIERA Link menu by operating the TV remote control.
You cannot input numbers with the numbered buttons on the
remote control ([0] to [10]). Use this unit's remote control to
input the IP Address, etc.