Text preview for : 107s2-p02.pdf part of Philips 107s2-p02 Philips Monitor CD 2001 Monitor CD 2001 E-MANUALS Philips crt 107s2 PDF 107s2-p02.pdf

Back to : 107s2-p02.pdf | Home

9 Go to cover page
Proper service and repair is important to the safe, reliable
operation of all PHILIPS Company** Equipment. FOR PRODUCTS CONTAINING LASER :
The service procedures recommended by PHILIPS and
described in this service manual are effective methods DANGER- Invisible laser radiation when open.
of performing service operations. Some of these service AVOID DIRECT EXPOSURE TO BEAM.
operations require the use of tools specially designed for
the purpose. The special tools should be used when and CAUTION- Use of controls or adjustments or
as recommended. performance of procedures other than
those specified herein may result in
It is important to note that this manual contains various
hazardous radiation exposure.
CAUTIONS and NOTICES which should be carefully
Read in order to minimize the risk of personal injury to CAUTION- The use of optical instruments with this
service personnel. The possibility exists that improper
product will increase eye hazard.
Service methods may damage the equipment. It also is
important to understand that these CAUTIONS and
possibly know, evaluate and advise the service trade of
all conceivable ways in which service might be done or of the TO ENSURE THE CONTINUED RELIABILITY OF THIS
possible hazardous consequences of each way. PRODUCT, USE ONLY ORIGINAL MANUFACTURER'S
Consequently, PHILIPS has not undertaken any such broad REPLACEMENT PARTS, WHICH ARE LISTED WITH THEIR
evaluation. Accordingly, a servicer who uses a service PART NUMBERS IN THE PARTS LIST SECTION OF THIS
procedure or tool which is not recommended by PHILIPS SERVICE MANUAL.
must first satisfy himself thoroughly that
neither his safety nor the safe operation of the equipment
will be jeopardized by the service method selected.

* * Hereafter throughout this manual, PHILIPS Company
Will be referred to as PHILIPS.


Critical components having special safety characteristics
are identified with a by the Ref. No. in the parts list
and enclosed within a broken line* (where several critical
components are grouped in one area) along with the
safety symbol on the schematics or exploded views.

Use of substitute replacement parts which do not have
the same specified safety characteristics may create
shock, fire, or other hazards.

Under no circumstances should the original design be
modified or altered without written permission from
PHILIPS. PHILIPS assumes no liability, express or
implied, arising out of any unauthorized modification
Of design.
Servicer assumes all liability.

* Broken Line

Back Forward