Text preview for : p02.pdf part of Philips p02 Philips Monitor Monitor CD 2001.part02 Monitor CD 2001 E-MANUALS Philips crt 107p pdf p02.pdf
Back to : p02.pdf | Home
2 107P CM25 GSIII IMPORTANT SAFETY NOTICE
9 Go to cover page
Proper service and repair is important to the safe, reliable FOR PRODUCTS CONTAINING LASER :
operation of all PHILIPS Company** Equipment.
The service procedures recommended by PHILIPS and DANGER- Invisible laser radiation when open.
described in this service manual are effective methods AVOID DIRECT EXPOSURE TO BEAM.
of performing service operations. Some of these service
operations require the use of tools specially designed for CAUTION- Use of controls or adjustments or
the purpose. The special tools should be used when and performance of procedures other than
as recommended. those specified herein may result in
hazardous radiation exposure.
It is important to note that this manual contains various
CAUTIONS and NOTICES which should be carefully CAUTION- The use of optical instruments with this
Read in order to minimize the risk of personal injury to
product will increase eye hazard.
service personnel. The possibility exists that improper
Service methods may damage the equipment. It also is
important to understand that these CAUTIONS and
NOTICES ARE NOT EXHAUSTIVE. PHILIPS could not
possibly know, evaluate and advise the service trade of TO ENSURE THE CONTINUED RELIABILITY OF THIS
all conceivable ways in which service might be done or of PRODUCT, USE ONLY ORIGINAL MANUFACTURER'S
the possible hazardous consequences of each way. REPLACEMENT PARTS, WHICH ARE LISTED WITH
Consequently, PHILIPS has not undertaken any such THEIR PART NUMBERS IN THE PARTS LIST SECTION
broad evaluation. Accordingly, a servicer who uses a OF THIS SERVICE MANUAL.
service procedure or tool which is not recommended by
PHILIPS must first satisfy himself thoroughly that
neither his safety nor the safe operation of the equipment
will be jeopardized by the service method selected.
* * Hereafter throughout this manual, PHILIPS Company
Will be referred to as PHILIPS.
Critical components having special safety characteristics
are identified with a by the Ref. No. in the parts list
and enclosed within a broken line* (where several critical
components are grouped in one area) along with the
safety symbol on the schematics or exploded views.
Use of substitute replacement parts which do not have
the same specified safety characteristics may create
shock, fire, or other hazards.
Under no circumstances should the original design be
modified or altered without written permission from
PHILIPS. PHILIPS assumes no liability, express or
implied, arising out of any unauthorized modification
Servicer assumes all liability.
* Broken Line