Text preview for : Panel_LG-Philips_LCD_LM181E06-A4M1_0_[DS].pdf part of . Various Panel LG-Philips LCD LM181E06-A4M1 0 [DS] . Various LCD Panels Panel_LG-Philips_LCD_LM181E06-A4M1_0_[DS].pdf
Back to : Panel_LG-Philips_LCD_LM18 | Home
LM181E06
Liquid Crystal Display
Product Specification
1. General Description
The LM181E06-A4M1 is a Color Active Matrix Liquid Crystal Display with an integral Cold Cathode Fluorescent
Lamp(CCFL) backlight system. The matrix employs a-Si Thin Film Transistor as the active element.
It is a transmissive type display operating in the normally black mode. This TFT-LCD has a 18.1 inch diagonally
measured active display area with SXGA resolution(1024 vertical by 1280 horizontal pixel array).
Each pixel is divided into Red, Green and Blue sub-pixels or dots which are arranged in vertical stripes.
Gray scale or the brightness of the sub-pixel color is determined with a 8-bit gray scale signal for each dot,
thus, presenting a palette of more than 16,777,216 colors.
The LM181E06-A4M1 has been designed to apply the interface method that enables low power, high speed,low
EMI. FPD Link must be used as a LVDS(Low Voltage Differential Signaling) chip.
The LM181E06-A4M1 is intended to support applications where thin thickness, wide viewing angle, low power are
critical factors and graphic displays are important. In combination with the vertical arrangement of the sub-pixels,
the LM181E06-A4M1 characteristics provide an excellent flat panel display for office automation products such as
monitors.
G1
Gate Driver Circuit
LVDS
pair #1
CN1 Timing Controller
(30pin)
LVDS
PLVDS 1 Chip TFT - LCD Panel
pair #2 (1280