Text preview for : kze.pdf part of UCC kze . Electronic Components Datasheets Passive components capacitors Datasheets UCC kze.pdf
Back to : kze.pdf | Home
MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS Low impedance, 105C
KZH
Lower Z
@Ultra Low impedance for Personal Computers Storage Equipment KZE
@Endurance with ripple current: 1,000 to 5,000 hours at 105C
@Non solvent resistant type Lower Z
@RoHS Compliant KY
?SPECIFICATIONS
Items Characteristics
Category
Temperature Range -40 to +105C
Rated Voltage Range 6.3 to 100Vdc
Capacitance Tolerance P20% (M) (at 20C, 120Hz)
Leakage Current I=0.01CV or 3MA, whichever is greater.
Where, I : Max. leakage current (MA), C : Nominal capacitance (MF), V : Rated voltage (V) (at 20C after 2 minutes)
Dissipation Factor Rated voltage (Vdc) 6.3V 10V 16V 25V 35V 50V 63V 80V 100V
(tane) tanE (Max.) 0.22 0.19 0.16 0.14 0.12 0.10 0.09 0.09 0.08
When nominal capacitance exceeds 1,000MF, add 0.02 to the value above for each 1,000MF increase. (at 20C, 120Hz)
Low Temperature Z (-25C) / Z (+20C) 2max.
Characteristics Z (-40C) / Z (+20C) 3max.
(Max. Impedance Ratio)
(at 120Hz)
Endurance The following specifications shall be satisfied when the capacitors are restored to 20C after subjected to DC voltage with the rated
ripple current is applied for the specified period of time at 105C.
Time 7L : 1,000hours F5 & F6.3 : 2,000hours F8 : 3,000hours F10 : 4,000hours F12.5 to F18 : 5,000hours
Capacitance change [P25% of the initial value
D.F. (tanE) [200% of the initial specified value
Leakage current [The initial specified value
Shelf Life The following specifications shall be satisfied when the capacitors are restored to 20C after exposing them for 500 hours at 105C without
voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4.
Capacitance change [P25% of the initial value
D.F. (tanE) [200% of the initial specified value
Leakage current [The initial specified value
?DIMENSIONS [mm]
@Terminal Code : E
Sleeve (PET : Brown)
FP0.5
FP0.5
Fd
fD 5 6.3 8 10, 12.5 16, 18
7L 0.45 0.45 0.45 - -
fd
FD'
11LK 0.5 0.5 0.6 0.6 0.8
F 2.0 2.5 3.5 5.0 7.5
L' 15min 4min fD' FD+0.5max.
Vent (F5 to F10) (F12.5 to F16)
(Except 7L & F5 & F6.3) L' L+1.5max.(7L : L+1.0max.)
Gas escape end seal
?PART NUMBERING SYSTEM
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
E KZ E AAA E AA AAA M AAA N
Supplement code
Size code
Capacitance tolerance code
Capacitance code (ex. 6.8MF:6R8, 10MF:100, 1,000MF:102)
Lead forming