Text preview for : lbg.pdf part of UCC lbg . Electronic Components Datasheets Passive components capacitors Datasheets UCC lbg.pdf



Back to : lbg.pdf | Home

MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS For airbag module, 105C




@For airbag application
@High capacitance, low impedance, and good low temperature behavior
@Endurance with ripple current : 5,000 hours at 105C
@Solvent resistant type (see PRECAUTIONS AND GUIDELINES)
@RoHS Compliant


?SPECIFICATIONS
Items Characteristics
Category
Temperature Range -55 to +105C

Rated Voltage Range 25 & 35Vdc
Capacitance Range 1,000 to 11,000MF (at 20C, 120Hz)
Capacitance Tolerance 0 to +30% (A) (at 20C, 120Hz)
Leakage Current I=0.01CV
Where, I : Max. leakage current (MA), C : Nominal capacitance (MF), V : Rated voltage (V) (at 20C after 2 minutes)
Dissipation Factor Rated voltage (Vdc) 25V 35V
(tane) tanE (Max.) 0.20 0.16
When nominal capacitance exceeds 1,000MF, add 0.02 to the value above for each 1,000MF increase. (at 20C, 120Hz)
Low Temperature Rated voltage (Vdc) 25V 35V
Characteristics Z(-55C)/Z(+20C) 3 3
(Max. Impedance Ratio)
Impedance at -40C and 20C 100kHz in the STANDARD RATINGS (at 120Hz)
Endurance The following specifications shall be satisfied when the capacitors are restored to 20C after subjected to DC voltage with the rated
ripple current is applied for 5,000 hours at 105C.
Capacitance change [P20% of the initial value
D.F. (tanE) [200% of the initial specified value
Leakage current [The initial specified value
Shelf Life The following specifications shall be satisfied when the capacitors are restored to 20C after exposing them for 1,000 hours at 105C without
voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4.
Capacitance change [P20% of the initial value
D.F. (tanE) [200% of the initial specified value
Leakage current [The initial specified value


?DIMENSIONS [mm]
@Terminal Code : E
Sleeve (PET : Dark blue)
FP0.5
Fd




fD 12.5 14.5 16 18
fd 0.6 0.8 0.8 0.8
FD'




F 5.0 7.5 7.5 7.5
fD' FD+0.5max.
L' L+1.5max.
Vent L' 15min. 4min.
Gas escape end seal


?PART NUMBERING SYSTEM
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18

E L BG AAA E AA AAA A AAA S
Supplement code
Size code
Capacitance tolerance code
Capacitance code (ex. 820MF:821, 2,200MF:222)
Lead forming