Text preview for : service mode.pdf part of service menus for many tv models



Back to : service mode.pdf | Home

ServiceMode 3.71 by stef_no1
Manufacturer
Akai

e-mail: [email protected]
Product
CTV

This is ServiceModeWare. If you find this usefull send me 2 new service modes.
Model
CT-2119

Chassis

Mode
Test Mode

Enter
Simultaneous press + & - on local panel and then power on with main switch. Exit: POWER. OFF: Select programm 38. Simultaneous press (3 sec) STORE & CONTROL+ on local keyboard. ON: Select programm 38. Simultaneous press (3 sec) STORE & PROGRAM- on local keyboard. Press UP & DOWN buttons together on tv's local control and then switch on. You will see SERVICE MODE. Do not press any button, just power off the set, then on. Press UP & DOWN buttons together on tv's local control and then switch on. Simultaneous press P+ & P- on local panel and then power on with main switch. Press button P/C on RC and switch on TV with main switch. Press button 'i' on RC and switch on TV with main switch.

Allstar

3750

CTV

Hotel Mode

AudioTon

CTV 5502

10.3 90° MONO

CTV

Child Lock Clear Service Mode Service Mode ATS Hotel Mode Cancel

AudioTon Beko Blaupunkt Blaupunkt

CTV 5502

10.3 90° MONO

CTV CTV

MM63-13VT MM63-13VT

FM240.00 FM240.00

CTV CTV

Brandt

ICC9

CTV

Switch off TV with RC (st-by). Switch off TV with main switch. Wait a few sec till ST_BY LED Service Mode switch off. Simultaneous press VT button on RC and switch on TV with main switch. Press VT button again. (WARNING: scart must be free.) Service Mode Press and hold P+ and P- on local panel, then switch on TV with main switch.

Continental

CT1412B

CTV

Ferguson

ICC9

CTV

Switch off TV with RC (st-by). Switch off TV with main switch. Wait a few sec till ST_BY LED Service Mode switch off. Simultaneous press VT button on RC and switch on TV with main switch. Press VT button again. (WARNING: scart must be free.) Put TV into standby, then turn power off, then turn power on whilst holding standby button on remote and step through menus to `vol set` and increase level to max. MUTE --> OK (M) --> TV Controls: cursor buttons. Store: OK (M). Exit: TV Simultaneously press MENU, VOL-, PR- on the local panel. Turn on 'TV Internal Service Program' switch on the digital modul (SE on display). On RC: 1=U1 V SHIFT, 2=U2 V LIN DN, 3=U3 V LIN, 4=H1 H SHIFT, 5=H2 H AMP, 6=H3 EW AMP, 7= C, 8=C1, 9=C2, 0=H4 EW TRAPEZ... TV=MEMO, VOL+/-=ADJUST. Press VOL+, VOL-, PR-, PR+, OK.

Ferguson

TX92

CTV

Hotel Mode Cancel

Finlux GoldStar

17/21B60 63/71Y2

STEREO PLUS MC-51B

CTV CTV

Service Mode Service Mode

Graetz

BURGGRAF STEREO 4876 Digivision

DIGI III 110°

CTV

Service Mode

Grundig

CUC1800

CTV

Child Lock Cancel

Manufacturer
Grundig

Model

Chassis
CUC1800

Product
CTV

Mode
EPROM Version Nr. Service Mode ATS Reset Child Lock Cancel Default Values Entering

Enter
Press button 'i' to call up the 'Dialog Center' --> OK. The version number is shown by pressing the 'AUX' button. The index 01 of the part nr. (19798-300.01) indicates the EPROM version. Menu guide: 'i', 'Special functions', 'Service', 'Code 8500'. Press and hold button VOL+ on the TV and switch the mains button ON. ATS bit is set. Press VOL+, VOL-, PR-, PR+, OK. Depress and hold the button 'P-' on the RC while switching on with the mains button. (This is only possible once on replacement of the NVM or uP). Press button 'i' to call up the 'Dialog Center' --> OK. The version number is shown by pressing the 'AUX' button. The index 01 of the part nr. (19798-300.01) indicates the EPROM version. Press 'i'. Dialog Center --> Service --> 'for authorized dealer' --> Code Number 8500. Press and hold the 'AUX' button on the RC while switching the TV on with the mains button. General reset with number 7038. Demo on: Depress and hold button 'L+' on the TV and switch the TV on with the mains button. Press the 'P+' button within a time of 10s. Demo off: ATS Reset (by depressing the 'L+' button on the TV while switching on with the mains button). Press button 'i' to call up the 'Dialog Center' --> OK. The version number is shown by pressing the 'AUX' button. The index 01 of the part nr. (19798-300.01) indicates the EPROM version. Buttons 'AUX', 'OK'. Menu guide: 'i', 'Dialog Center', 'Service', 'Only for retailer', 'Code 8500'. Press VOL+, VOL-, PR-, PR+, OK. Press button 'i' to call up the 'Dialog Center' --> OK. The version number is shown by pressing the 'AUX' button. The index 01 of the part nr. (19798-300.01) indicates the EPROM version. Menu guide: 'i', 'Special functions', 'Service', 'Code 8500'. Press VOL+, VOL-, PR-, PR+, OK. Press button 'i' to call up the 'Dialog Center' --> OK. The version number is shown by pressing the 'AUX' button. The index 01 of the part nr. (19798-300.01) indicates the EPROM version. Menu guide: 'i', 'Special functions', 'Service', 'Code 8500'. Press VOL+, VOL-, PR-, PR+, OK.

Grundig Grundig Grundig

CUC1800 CUC1805 CUC1805

CTV CTV CTV

Grundig

CUC1805

CTV

Grundig

CUC1805

CTV

EPROM Version Nr. Service Mode Volume Offset Cancel Child Lock Cancel

Grundig Grundig Grundig

CUC1805 CUC1805 CUC1806

CTV CTV CTV

Grundig

CUC1806

CTV

Demo Mode

Grundig

CUC1806

CTV

EPROM Version Nr. Factory Default Values Resetting Service Mode Child Lock Cancel EPROM Version Nr. Service Mode Child Lock Cancel EPROM Version Nr. Service Mode Child Lock Cancel

Grundig

CUC1806

CTV

Grundig Grundig

CUC1806 CUC1821

CTV CTV

Grundig

CUC1821

CTV

Grundig Grundig

CUC1821 CUC1822

CTV CTV

Grundig

CUC1822

CTV

Grundig Grundig

CUC1822 CUC1824

CTV CTV

Manufacturer
Grundig

Model

Chassis
CUC1824

Product
CTV

Mode
EPROM Version Nr. Service Mode ATS Reset Child Lock Cancel EPROM Version Nr.

Enter
Press button 'i' to call up the 'Dialog Center' --> OK. The version number is shown by pressing the 'AUX' button. The index 01 of the part nr. (19798-300.01) indicates the EPROM version. Menu guide: 'i', 'Special functions', 'Service', 'Code 8500'. Press and hold button VOL+ on the TV and switch the mains button ON. ATS bit is set. Press VOL+, VOL-, PR-, PR+, OK. Press button 'i' to call up the 'Dialog Center' --> OK. The version number is shown by pressing the 'AUX' button. The index 01 of the part nr. (19798-300.01) indicates the EPROM version. Press and hold the P- buton on the TV and switch on with the mains button. Loading the Average Values / Emergency Data Set (ROM Dana). This is only possible once on replacement of the NVM or uP. Menu guide: 'i', 'Dialog Center', 'Service', 'Only for retailer', 'Code 8500'. Press and hold the 'AUX' button on the RC while switching the TV on with the mains button. Press and hold button VOL+ on the TV and switch the mains button ON. ATS bit is set. Press VOL+, VOL-, PR-, PR+, OK. Press button 'i' to call up the 'Dialog Center' --> OK. The version number is shown by pressing the 'AUX' button. The index 01 of the part nr. (19798-300.01) indicates the EPROM version. Press and hold the P- buton on the TV and switch on with the mains button. Loading the Average Values / Emergency Data Set (ROM Dana). This is only possible once on replacement of the NVM or uP. Press 'i'. Dialog Center --> Service --> 'for authorized dealer' --> Code Number 8500. Press and hold the 'AUX' button on the RC while switching the TV on with the mains button. Press VOL+, VOL-, PR-, PR+, OK. Depress and hold the button 'P-' on the RC while switching on with the mains button. (This is only possible once on replacement of the NVM or uP). Press button 'i' to call up the 'Dialog Center' --> OK. The version number is shown by pressing the 'AUX' button. The index 01 of the part nr. (19798-300.01) indicates the EPROM version. Menu guide: 'i', 'Dialog Center', 'Service', 'Only for retailer', 'Code 8500'. Press and hold the 'AUX' button on the RC while switching the TV on with the mains button. General reset with number 7038.

Grundig Grundig Grundig

CUC1824 CUC1825 CUC1825

CTV CTV CTV

Grundig

CUC1825

CTV

Grundig

CUC1825

CTV

ROM Data Loading

Grundig Grundig Grundig Grundig

CUC1825 CUC1825 CUC1826 CUC1826

CTV CTV CTV CTV

Service Mode Volume Offset Cancel ATS Reset Child Lock Cancel EPROM Version Nr.

Grundig

CUC1826

CTV

Grundig

CUC1826

CTV

ROM Data Loading

Grundig Grundig Grundig

CUC1826 CUC1826 CUC1827

CTV CTV CTV

Service Mode Volume Offset Cancel Child Lock Cancel Default Values Entering

Grundig

CUC1827

CTV

Grundig

CUC1827

CTV

EPROM Version Nr. Service Mode Volume Offset Cancel Child Lock Cancel

Grundig Grundig Grundig

CUC1827 CUC1827 CUC1828

CTV CTV CTV

Manufacturer

Model

Chassis

Product

Mode

Enter
Demo on: Depress and hold button 'L+' on the TV and switch the TV on with the mains button. Press the 'P+' button within a time of 10s. Demo off: ATS Reset (by depressing the 'L+' button on the TV while switching on with the mains button). Press button 'i' to call up the 'Dialog Center' --> OK. The version number is shown by pressing the 'AUX' button. The index 01 of the part nr. (19798-300.01) indicates the EPROM version. Buttons 'AUX', 'OK'. Menu guide: 'i', 'Dialog Center', 'Service', 'Only for retailer', 'Code 8500'. General reset with number 7038. Demo on: Depress and hold button 'L+' on the TV and switch the TV on with the mains button. Press the 'P+' button within a time of 10s. Demo off: ATS Reset (by depressing the 'L+' button on the TV while switching on with the mains button). Press button 'i' to call up the 'Dialog Center' --> OK. The version number is shown by pressing the 'AUX' button. The index 01 of the part nr. (19798-300.01) indicates the EPROM version. Buttons 'AUX', 'OK'. Menu guide: 'i', 'Dialog Center', 'Service', 'Only for retailer', 'Code 8500'. General reset with number 7038. Demo on: Depress and hold button 'L+' on the TV and switch the TV on with the mains button. Press the 'P+' button within a time of 10s. Demo off: ATS Reset (by depressing the 'L+' button on the TV while switching on with the mains button). Press button 'i' to call up the 'Dialog Center' --> OK. The version number is shown by pressing the 'AUX' button. The index 01 of the part nr. (19798-300.01) indicates the EPROM version. Buttons 'AUX', 'OK'. Menu guide: 'i', 'Dialog Center', 'Service', 'Only for retailer', 'Code 8500'. General reset with number 7038. Demo on: Depress and hold button 'L+' on the TV and switch the TV on with the mains button. Press the 'P+' button within a time of 10s. Demo off: ATS Reset (by depressing the 'L+' button on the TV while switching on with the mains button).

Grundig

CUC1828

CTV

Demo Mode

Grundig

CUC1828

CTV

EPROM Version Nr. Factory Default Values Resetting Service Mode Child Lock Cancel

Grundig

CUC1828

CTV

Grundig Grundig

CUC1828 CUC1829

CTV CTV

Grundig

CUC1829

CTV

Demo Mode

Grundig

CUC1829

CTV

EPROM Version Nr. Factory Default Values Resetting Service Mode Child Lock Cancel

Grundig

CUC1829

CTV

Grundig Grundig

CUC1829 CUC1830

CTV CTV

Grundig

CUC1830

CTV

Demo Mode

Grundig

CUC1830

CTV

EPROM Version Nr. Factory Default Values Resetting Service Mode Child Lock Cancel

Grundig

CUC1830

CTV

Grundig Grundig

CUC1830 CUC1836

CTV CTV

Grundig

CUC1836

CTV

Demo Mode

Manufacturer
Grundig

Model

Chassis
CUC1836

Product
CTV

Mode
EPROM Version Nr. Factory Default Values Resetting Service Mode Child Lock Cancel

Enter
Press button 'i' to call up the 'Dialog Center' --> OK. The version number is shown by pressing the 'AUX' button. The index 01 of the part nr. (19798-300.01) indicates the EPROM version. Buttons 'AUX', 'OK'. Menu guide: 'i', 'Dialog Center', 'Service', 'Only for retailer', 'Code 8500'. Press VOL+, VOL-, PR-, PR+, OK. Demo on: Depress and hold button 'L+' on the TV and switch the TV on with the mains button. Press the 'P+' button within a time of 10s. Demo off: ATS Reset (by depressing the 'L+' button on the TV while switching on with the mains button). Press button 'i' to call up the 'Dialog Center' --> OK. The version number is shown by pressing the 'AUX' button. The index 01 of the part nr. (19798-300.01) indicates the EPROM version. Buttons 'AUX', 'OK'. Menu guide: 'i', 'Dialog Center', 'Service', 'Only for retailer', 'Code 8500'. Press VOL+, VOL-, PR-, PR+, OK. Press button 'i' to call up the 'Dialog Center' --> OK. The version number is shown by pressing the 'AUX' button. The index 01 of the part nr. (19798-300.01) indicates the EPROM version. Menu guide: 'i', 'Special functions', 'Service', 'Code 8500'. Press VOL+, VOL-, PR-, PR+, OK. Press button 'i' to call up the 'Dialog Center' --> OK. The version number is shown by pressing the 'AUX' button. The index 01 of the part nr. (19798-300.01) indicates the EPROM version. Menu guide: 'i', 'Special functions', 'Service', 'Code 8500'. Press VOL+, VOL-, PR-, PR+, OK. Press button 'i' to call up the 'Dialog Center' --> OK. The version number is shown by pressing the 'AUX' button. The index 01 of the part nr. (19798-300.01) indicates the EPROM version. Menu guide: 'i', 'Special functions', 'Service', 'Code 8500'. Press VOL+, VOL-, PR-, PR+, OK. Press button 'i' to call up the 'Dialog Center' --> OK. The version number is shown by pressing the 'AUX' button. The index 01 of the part nr. (19798-300.01) indicates the EPROM version. Menu guide: 'i', 'Special functions', 'Service', 'Code 8500'.

Grundig

CUC1836

CTV

Grundig Grundig

CUC1836 CUC1842

CTV CTV

Grundig

CUC1842

CTV

Demo Mode

Grundig

CUC1842

CTV

EPROM Version Nr. Factory Default Values Resetting Service Mode Child Lock Cancel EPROM Version Nr. Service Mode Child Lock Cancel EPROM Version Nr. Service Mode Child Lock Cancel EPROM Version Nr. Service Mode Child Lock Cancel EPROM Version Nr. Service Mode

Grundig

CUC1842

CTV

Grundig Grundig

CUC1842 CUC1851

CTV CTV

Grundig

CUC1851

CTV

Grundig Grundig

CUC1851 CUC1852

CTV CTV

Grundig

CUC1852

CTV

Grundig Grundig

CUC1852 CUC1881

CTV CTV

Grundig

CUC1881

CTV

Grundig Grundig

CUC1881 CUC1892

CTV CTV

Grundig

CUC1892

CTV

Grundig

CUC1892

CTV

Manufacturer
Grundig

Model

Chassis
CUC1894

Product
CTV

Mode
Child Lock Cancel

Enter
Press VOL+, VOL-, PR-, PR+, OK. Demo on: Depress and hold button 'L+' on the TV and switch the TV on with the mains button. Press the 'P+' button within a time of 10s. Demo off: ATS Reset (by depressing the 'L+' button on the TV while switching on with the mains button). Press button 'i' to call up the 'Dialog Center' --> OK. The version number is shown by pressing the 'AUX' button. The index 01 of the part nr. (19798-300.01) indicates the EPROM version. Buttons 'AUX', 'OK'. Menu guide: 'i', 'Dialog Center', 'Service', 'Only for retailer', 'Code 8500'. General reset with number 7038. Demo on: Depress and hold button 'L+' on the TV and switch the TV on with the mains button. Press the 'P+' button within a time of 10s. Demo off: ATS Reset (by depressing the 'L+' button on the TV while switching on with the mains button). Press button 'i' to call up the 'Dialog Center' --> OK. The version number is shown by pressing the 'AUX' button. The index 01 of the part nr. (19798-300.01) indicates the EPROM version. Buttons 'AUX', 'OK'. Menu guide: 'i', 'Dialog Center', 'Service', 'Only for retailer', 'Code 8500'. Press VOL+, VOL-, PR-, PR+, OK. Demo on: Depress and hold button 'L+' on the TV and switch the TV on with the mains button. Press the 'P+' button within a time of 10s. Demo off: ATS Reset (by depressing the 'L+' button on the TV while switching on with the mains button). Press button 'i' to call up the 'Dialog Center' --> OK. The version number is shown by pressing the 'AUX' button. The index 01 of the part nr. (19798-300.01) indicates the EPROM version. Buttons 'AUX', 'OK'. Menu guide: 'i', 'Dialog Center', 'Service', 'Only for retailer', 'Code 8500'. Press VOL+, VOL-, PR-, PR+, OK.

Grundig

CUC1894

CTV

Demo Mode

Grundig

CUC1894

CTV

EPROM Version Nr. Factory Default Values Resetting Service Mode Child Lock Cancel

Grundig

CUC1894

CTV

Grundig Grundig

CUC1894 CUC1929

CTV CTV

Grundig

CUC1929

CTV

Demo Mode

Grundig

CUC1929

CTV

EPROM Version Nr. Factory Default Values Resetting Service Mode Child Lock Cancel

Grundig

CUC1929

CTV

Grundig Grundig

CUC1929 CUC1952

CTV CTV

Grundig

CUC1952

CTV

Demo Mode

Grundig

CUC1952

CTV

EPROM Version Nr. Factory Default Values Resetting Service Mode Child Lock Cancel

Grundig

CUC1952

CTV

Grundig Grundig

CUC1952 CUC1962

CTV CTV

Manufacturer

Model

Chassis

Product

Mode

Enter
Demo on: Depress and hold button 'L+' on the TV and switch the TV on with the mains button. Press the 'P+' button within a time of 10s. Demo off: ATS Reset (by depressing the 'L+' button on the TV while switching on with the mains button). Press button 'i' to call up the 'Dialog Center' --> OK. The version number is shown by pressing the 'AUX' button. The index 01 of the part nr. (19798-300.01) indicates the EPROM version. Buttons 'AUX', 'OK'. Menu guide: 'i', 'Dialog Center', 'Service', 'Only for retailer', 'Code 8500'. Press VOL+, VOL-, PR-, PR+, OK. Demo on: Depress and hold button 'L+' on the TV and switch the TV on with the mains button. Press the 'P+' button within a time of 10s. Demo off: ATS Reset (by depressing the 'L+' button on the TV while switching on with the mains button). Press button 'i' to call up the 'Dialog Center' --> OK. The version number is shown by pressing the 'AUX' button. The index 01 of the part nr. (19798-300.01) indicates the EPROM version. Buttons 'AUX', 'OK'. Menu guide: 'i', 'Dialog Center', 'Service', 'Only for retailer', 'Code 8500'. Press VOL+, VOL-, PR-, PR+, OK. Demo on: Depress and hold button 'L+' on the TV and switch the TV on with the mains button. Press the 'P+' button within a time of 10s. Demo off: ATS Reset (by depressing the 'L+' button on the TV while switching on with the mains button). Press button 'i' to call up the 'Dialog Center' --> OK. The version number is shown by pressing the 'AUX' button. The index 01 of the part nr. (19798-300.01) indicates the EPROM version. Buttons 'AUX', 'OK'. Menu guide: 'i', 'Dialog Center', 'Service', 'Only for retailer', 'Code 8500'. Depress and hold button 'i' on the RC while switching on with the mains button. Move the bar to 'AGC' in the Service Menu and operate the buttons 'AUX', 'OK' in this order. General reset with number 7038.

Grundig

CUC1962

CTV

Demo Mode

Grundig

CUC1962

CTV

EPROM Version Nr. Factory Default Values Resetting Service Mode Child Lock Cancel

Grundig

CUC1962

CTV

Grundig Grundig

CUC1962 CUC1983

CTV CTV

Grundig

CUC1983

CTV

Demo Mode

Grundig

CUC1983

CTV

EPROM Version Nr. Factory Default Values Resetting Service Mode Child Lock Cancel

Grundig

CUC1983

CTV

Grundig Grundig

CUC1983 CUC1984

CTV CTV

Grundig

CUC1984

CTV

Demo Mode

Grundig

CUC1984

CTV

EPROM Version Nr. Factory Default Values Resetting Service Mode Band Limits Cancelling Child Lock Cancel

Grundig

CUC1984

CTV

Grundig

CUC1984

CTV

Grundig

CUC2020

CTV

Grundig

CUC2020

CTV

Manufacturer

Model

Chassis

Product

Mode

Enter
Depress and hold the button 'P-' on the RC while switching on with the mains button. (Additionally on replacement of the memory, the Hotel Mode and the band limits are to be deactivated and the AGC and AFC are to be readjusted).

Grundig

CUC2020

CTV

Default Values Entering

Grundig

CUC2020

CTV

Hotel Mode

Depress and hold button 'i' on the RC while switching on with the mains button. In the menu line 'HOTEL' select 'ON' and leave the menu with button 'i'. Cancelling the Hotel Mode: Repeat the steps above but change 'HOTEL' to 'OFF'. Depress and hold the 'i' button on the RC while switching on with the mains button. Set the OSD position in the menu and store with 'OK'. Menu guide: 'i', 'Dialog Center', 'Service', 'Only for retailer', 'Code 8500'. Depress and hold button 'i' on the RC while switching on with the mains button. Move the bar to 'AGC' in the Service Menu and operate the buttons 'AUX', 'OK' in this order. General reset with number 7038. Depress and hold the button 'P-' on the RC while switching on with the mains button. (Additionally on replacement of the memory, the Hotel Mode and the band limits are to be deactivated and the AGC and AFC are to be readjusted).

Grundig Grundig

CUC2020 CUC2020

CTV CTV

OSD position Service Mode Band Limits Cancelling Child Lock Cancel

Grundig

CUC2030

CTV

Grundig

CUC2030

CTV

Grundig

CUC2030

CTV

Default Values Entering

Grundig

CUC2030

CTV

Hotel Mode

Depress and hold button 'i' on the RC while switching on with the mains button. In the menu line 'HOTEL' select 'ON' and leave the menu with button 'i'. Cancelling the Hotel Mode: Repeat the steps above but change 'HOTEL' to 'OFF'. Depress and hold the 'i' button on the RC while switching on with the mains button. Set the OSD position in the menu and store with 'OK'. Menu guide: 'i', 'Dialog Center', 'Service', 'Only for retailer', 'Code 8500'. Depress and hold button 'i' on the RC while switching on with the mains button. Move the bar to 'AGC' in the Service Menu and operate the buttons 'AUX', 'OK' in this order. General reset with number 7038. Depress and hold the button 'P-' on the RC while switching on with the mains button. (Additionally on replacement of the memory, the Hotel Mode and the band limits are to be deactivated and the AGC and AFC are to be readjusted).

Grundig Grundig

CUC2030 CUC2030

CTV CTV

OSD position Service Mode Band Limits Cancelling Child Lock Cancel

Grundig

CUC2031

CTV

Grundig

CUC2031

CTV

Grundig

CUC2031

CTV

Default Values Entering

Manufacturer

Model

Chassis

Product

Mode

Enter
Depress and hold button 'i' on the RC while switching on with the mains button. In the menu line 'HOTEL' select 'ON' and leave the menu with button 'i'. Cancelling the Hotel Mode: Repeat the steps above but change 'HOTEL' to 'OFF'. Depress and hold the 'i' button on the RC while switching on with the mains button. Set the OSD position in the menu and store with 'OK'. Menu guide: 'i', 'Dialog Center', 'Service', 'Only for retailer', 'Code 8500'. Depress and hold button 'i' on the RC while switching on with the mains button. Move the bar to 'AGC' in the Service Menu and operate the buttons 'AUX', 'OK' in this order. General reset with number 7038. Depress and hold the button 'P-' on the RC while switching on with the mains button. (Additionally on replacement of the memory, the Hotel Mode and the band limits are to be deactivated and the AGC and AFC are to be readjusted).

Grundig

CUC2031

CTV

Hotel Mode

Grundig Grundig

CUC2031 CUC2031

CTV CTV

OSD position Service Mode Band Limits Cancelling Child Lock Cancel

Grundig

CUC2050

CTV

Grundig

CUC2050

CTV

Grundig

CUC2050

CTV

Default Values Entering

Grundig

CUC2050

CTV

Hotel Mode

Depress and hold button 'i' on the RC while switching on with the mains button. In the menu line 'HOTEL' select 'ON' and leave the menu with button 'i'. Cancelling the Hotel Mode: Repeat the steps above but change 'HOTEL' to 'OFF'. Depress and hold the 'i' button on the RC while switching on with the mains button. Set the OSD position in the menu and store with 'OK'. Menu guide: 'i', 'Dialog Center', 'Service', 'Only for retailer', 'Code 8500'. Depress and hold button 'i' on the RC while switching on with the mains button. Move the bar to 'AGC' in the Service Menu and operate the buttons 'AUX', 'OK' in this order. General reset with number 7038. Depress and hold the button 'P-' on the RC while switching on with the mains button. (Additionally on replacement of the memory, the Hotel Mode and the band limits are to be deactivated and the AGC and AFC are to be readjusted).

Grundig Grundig

CUC2050 CUC2050

CTV CTV

OSD position Service Mode Band Limits Cancelling Child Lock Cancel

Grundig

CUC2051

CTV

Grundig

CUC2051

CTV

Grundig

CUC2051

CTV

Default Values Entering

Grundig

CUC2051

CTV

Hotel Mode

Depress and hold button 'i' on the RC while switching on with the mains button. In the menu line 'HOTEL' select 'ON' and leave the menu with button 'i'. Cancelling the Hotel Mode: Repeat the steps above but change 'HOTEL' to 'OFF'.

Manufacturer
Grundig Grundig Grundig

Model

Chassis
CUC2051 CUC2051 CUC6300

Product
CTV CTV CTV

Mode
OSD position Service Mode Child Lock Cancel Default Values Entering

Enter
Depress and hold the 'i' button on the RC while switching on with the mains button. Set the OSD position in the menu and store with 'OK'. Menu guide: 'i', 'Dialog Center', 'Service', 'Only for retailer', 'Code 8500'. Press VOL+, VOL-, PR-, PR+, OK. Depress and hold the 'i' button on the RC while switching on with the mains button. Menu guide: 'Horizontal Position', 'OK', 'OK', press 'i' to leave the menu. Depress and hold button 'i' on the RC while switching on with the mains button. In the menu line 'HOTEL' select 'ON' and leave the menu with button 'i'. Cancelling the Hotel Mode: Repeat the steps above but change 'HOTEL' to 'OFF'. Depress and hold the 'i' button on the RC while switching on with the mains button. Set the OSD position in the menu and store with 'OK'. Press VOL+, VOL-, PR-, PR+, OK. Depress and hold the 'i' button on the RC while switching on with the mains button. Menu guide: 'Horizontal Position', 'OK', 'OK', press 'i' to leave the menu. Depress and hold button 'i' on the RC while switching on with the mains button. In the menu line 'HOTEL' select 'ON' and leave the menu with button 'i'. Cancelling the Hotel Mode: Repeat the steps above but change 'HOTEL' to 'OFF'. Depress and hold the 'i' button on the RC while switching on with the mains button. Set the OSD position in the menu and store with 'OK'. Press VOL+, VOL-, PR-, PR+, OK. Depress and hold the 'i' button on the RC while switching on with the mains button. Menu guide: 'Horizontal Position', 'OK', 'OK', press 'i' to leave the menu. Depress and hold button 'i' on the RC while switching on with the mains button. In the menu line 'HOTEL' select 'ON' and leave the menu with button 'i'. Cancelling the Hotel Mode: Repeat the steps above but change 'HOTEL' to 'OFF'. Depress and hold the 'i' button on the RC while switching on with the mains button. Set the OSD position in the menu and store with 'OK'.

Grundig

CUC6300

CTV

Grundig

CUC6300

CTV

Hotel Mode

Grundig Grundig

CUC6300 CUC6301

CTV CTV

OSD position Child Lock Cancel Default Values Entering

Grundig

CUC6301

CTV

Grundig

CUC6301

CTV

Hotel Mode

Grundig Grundig

CUC6301 CUC6310

CTV CTV

OSD position Child Lock Cancel Default Values Entering

Grundig

CUC6310

CTV

Grundig

CUC6310

CTV

Hotel Mode

Grundig

CUC6310

CTV

OSD position

Manufacturer

Model

Chassis

Product

Mode

Enter
Depress and hold button 'i' on the RC while switching on with the mains button. In the menu line 'HOTEL' select 'ON' and leave the menu with button 'i'. Cancelling the Hotel Mode: Repeat the steps above but change 'HOTEL' to 'OFF'.

Grundig

CUC6330

CTV

Hotel Mode

Grundig

CUC6331

CTV

Hotel Mode

Depress and hold button 'i' on the RC while switching on with the mains button. In the menu line 'HOTEL' select 'ON' and leave the menu with button 'i'. Cancelling the Hotel Mode: Repeat the steps above but change 'HOTEL' to 'OFF'. Press VOL+, VOL-, PR-, PR+, OK. Depress and hold the button 'P-' on the RC while switching on with the mains button. (This is only possible once on replacement of the NVM or uP). Press button 'i' to call up the 'Dialog Center' --> OK. The version number is shown by pressing the 'AUX' button. The index 01 of the part nr. (19798-300.01) indicates the EPROM version. Depress and hold button 'P/C' on the RC while switching on with the mains button. In the menu line 'HOTEL' select 'ON' and leave the menu with button 'i'. Cancelling the Hotel Mode: Repeat the steps above but change 'HOTEL' to 'OFF'. Depress and hold the 'P/C' button on the RC while switching on with the mains button. Press and hold the 'AUX' button on the RC while switching the TV on with the mains button. Press VOL+, VOL-, PR-, PR+, OK. Depress and hold the button 'P-' on the RC while switching on with the mains button. (This is only possible once on replacement of the NVM or uP). Press button 'i' to call up the 'Dialog Center' --> OK. The version number is shown by pressing the 'AUX' button. The index 01 of the part nr. (19798-300.01) indicates the EPROM version. Depress and hold button 'P/C' on the RC while switching on with the mains button. In the menu line 'HOTEL' select 'ON' and leave the menu with button 'i'. Cancelling the Hotel Mode: Repeat the steps above but change 'HOTEL' to 'OFF'. Depress and hold the 'P/C' button on the RC while switching on with the mains button. Press and hold the 'AUX' button on the RC while switching the TV on with the mains button.

Grundig

CUC6360

CTV

Child Lock Cancel Default Values Entering

Grundig

CUC6360

CTV

Grundig

CUC6360

CTV

EPROM Version Nr.

Grundig

CUC6360

CTV

Hotel Mode

Grundig Grundig Grundig

CUC6360 CUC6360 CUC6365

CTV CTV CTV

Service Mode Volume Offset Cancel Child Lock Cancel Default Values Entering

Grundig

CUC6365

CTV

Grundig

CUC6365

CTV

EPROM Version Nr.

Grundig

CUC6365

CTV

Hotel Mode

Grundig Grundig

CUC6365 CUC6365

CTV CTV

Service Mode Volume Offset Cancel

Manufacturer
Grundig

Model

Chassis
CUC6380

Product
CTV

Mode
Child Lock Cancel Default Values Entering

Enter
Press VOL+, VOL-, PR-, PR+, OK. Depress and hold the button 'P-' on the RC while switching on with the mains button. (This is only possible once on replacement of the NVM or uP). Press button 'i' to call up the 'Dialog Center' --> OK. The version number is shown by pressing the 'AUX' button. The index 01 of the part nr. (19798-300.01) indicates the EPROM version. Depress and hold button 'P/C' on the RC while switching on with the mains button. In the menu line 'HOTEL' select 'ON' and leave the menu with button 'i'. Cancelling the Hotel Mode: Repeat the steps above but change 'HOTEL' to 'OFF'. Depress and hold the 'P/C' button on the RC while switching on with the mains button. Press and hold the 'AUX' button on the RC while switching the TV on with the mains button. Press VOL+, VOL-, PR-, PR+, OK. Depress and hold the button 'P-' on the RC while switching on with the mains button. (This is only possible once on replacement of the NVM or uP). Press button 'i' to call up the 'Dialog Center' --> OK. The version number is shown by pressing the 'AUX' button. The index 01 of the part nr. (19798-300.01) indicates the EPROM version. Depress and hold button 'P/C' on the RC while switching on with the mains button. In the menu line 'HOTEL' select 'ON' and leave the menu with button 'i'. Cancelling the Hotel Mode: Repeat the steps above but change 'HOTEL' to 'OFF'. Depress and hold the 'P/C' button on the RC while switching on with the mains button. Press and hold the 'AUX' button on the RC while switching the TV on with the mains button. Press VOL+, VOL-, PR-, PR+, OK. Depress and hold the button 'P-' on the RC while switching on with the mains button. (This is only possible once on replacement of the NVM or uP). Press button 'i' to call up the 'Dialog Center' --> OK. The version number is shown by pressing the 'AUX' button. The index 01 of the part nr. (19798-300.01) indicates the EPROM version.

Grundig

CUC6380

CTV

Grundig

CUC6380

CTV

EPROM Version Nr.

Grundig

CUC6380

CTV

Hotel Mode

Grundig Grundig Grundig

CUC6380 CUC6380 CUC6450

CTV CTV CTV

Service Mode Volume Offset Cancel Child Lock Cancel Default Values Entering

Grundig

CUC6450

CTV

Grundig

CUC6450

CTV

EPROM Version Nr.

Grundig

CUC6450

CTV

Hotel Mode

Grundig Grundig Grundig

CUC6450 CUC6450 CUC6460

CTV CTV CTV

Service Mode Volume Offset Cancel Child Lock Cancel Default Values Entering

Grundig

CUC6460

CTV

Grundig

CUC6460

CTV

EPROM Version Nr.

Manufacturer

Model

Chassis

Product

Mode

Enter
Depress and hold button 'P/C' on the RC while switching on with the mains button. In the menu line 'HOTEL' select 'ON' and leave the menu with button 'i'. Cancelling the Hotel Mode: Repeat the steps above but change 'HOTEL' to 'OFF'. Depress and hold the 'P/C' button on the RC while switching on with the mains button. Press and hold the 'AUX' button on the RC while switching the TV on with the mains button. Press VOL+, VOL-, PR-, PR+, OK. Depress and hold the button 'P-' on the RC while switching on with the mains button. (This is only possible once on replacement of the NVM or uP). Press button 'i' to call up the 'Dialog Center' --> OK. The version number is shown by pressing the 'AUX' button. The index 01 of the part nr. (19798-300.01) indicates the EPROM version. Depress and hold button 'P/C' on the RC while switching on with the mains button. In the menu line 'HOTEL' select 'ON' and leave the menu with button 'i'. Cancelling the Hotel Mode: Repeat the steps above but change 'HOTEL' to 'OFF'. Depress and hold the 'P/C' button on the RC while switching on with the mains button. Press and hold the 'AUX' button on the RC while switching the TV on with the mains button. Depress and hold down button 'P-' on the RC and switch the TV on from Standby with the local 'P+' button. (This is only possible once on replacement of the NVM or uP). Press button 'i' to call up the 'Dialog Center' --> OK. The version number is shown by pressing the 'AUX' button. The index 01 of the part nr. (19798-300.01) indicates the EPROM version. Depress and hold button 'P/C' while switching on from Standby with button 'P+' on the TV. Set the Hotel Mode to 'OFF' with 'OK'. Depress and hold the 'AUX' button on the RC while switching the TV on from Standby with the local 'P+' button. Depress and hold button 'i' on the RC while switching on with the mains button. In the menu line 'HOTEL' select 'ON' and leave the menu with button 'i'. Cancelling the Hotel Mode: Repeat the steps above but change 'HOTEL' to 'OFF'. Depress and hold down button 'P-' on the RC and switch the TV on from Standby with the local 'P+' button. (This is only possible once on replacement of the NVM or uP).

Grundig

CUC6460

CTV

Hotel Mode

Grundig Grundig Grundig

CUC6460 CUC6460 CUC6469

CTV CTV CTV

Service Mode Volume Offset Cancel Child Lock Cancel Default Values Entering

Grundig

CUC6469

CTV

Grundig

CUC6469

CTV

EPROM Version Nr.

Grundig

CUC6469

CTV

Hotel Mode

Grundig Grundig

CUC6469 CUC6469

CTV CTV

Service Mode Volume Offset Cancel Default Values Entering EPROM Version Nr.

Grundig

CUC7300

CTV

Grundig

CUC7300

CTV

Grundig

CUC7300

CTV

Hotel Mode Volume Offset Cancel

Grundig

CUC7300

CTV

Grundig

CUC7301

CTV

Hotel Mode

Grundig

CUC7302

CTV

Default Values Entering

Manufacturer
Grundig

Model

Chassis
CUC7302

Product
CTV

Mode
EPROM Version Nr.

Enter
Press button 'i' to call up the 'Dialog Center' --> OK. The version number is shown by pressing the 'AUX' button. The index 01 of the part nr. (19798-300.01) indicates the EPROM version. Depress and hold button 'P/C' while switching on from Standby with button 'P+' on the TV. Set the Hotel Mode to 'OFF' with 'OK'. Depress and hold the 'AUX' button on the RC while switching the TV on from Standby with the local 'P+' button. Depress and hold button 'i' on the RC while switching on with the mains button. Move the bar to 'AGC' in the Service Menu and operate the buttons 'AUX', 'OK' in this order. Depress and hold button 'i' on the RC while switching on with the mains button. In the menu line 'HOTEL' select 'ON' and leave the menu with button 'i'. Cancelling the Hotel Mode: Repeat the steps above but change 'HOTEL' to 'OFF'. Depress and hold the 'i' button on the RC while switching on with the mains button. Set the OSD position in the menu and store with 'OK'. Depress and hold button 'i' on the RC while switching on with the mains button. Move the bar to 'AGC' in the Service Menu and operate the buttons 'AUX', 'OK' in this order. Depress and hold button 'i' on the RC while switching on with the mains button. In the menu line 'HOTEL' select 'ON' and leave the menu with button 'i'. Cancelling the Hotel Mode: Repeat the steps above but change 'HOTEL' to 'OFF'. Depress and hold the 'i' button on the RC while switching on with the mains button. Set the OSD position in the menu and store with 'OK'. Depress and hold button 'i' on the RC while switching on with the mains button. In the menu line 'HOTEL' select 'ON' and leave the menu with button 'i'. Cancelling the Hotel Mode: Repeat the steps above but change 'HOTEL' to 'OFF'. Press VOL+, VOL-, PR-, PR+, OK. Press button 'i' to call up the 'Dialog Center' --> OK. The version number is shown by pressing the 'AUX' button. The index 01 of the part nr. (19798-300.01) indicates the EPROM version. Press VOL+, VOL-, PR-, PR+, OK. Press button 'i' to call up the 'Dialog Center' --> OK. The version number is shown by pressing the 'AUX' button. The index 01 of the part nr. (19798-300.01) indicates the EPROM version. Press VOL+, VOL-, PR-, PR+, OK.

Grundig

CUC7302

CTV

Hotel Mode Volume Offset Cancel Band Limits Cancelling

Grundig

CUC7302

CTV

Grundig

CUC7303

CTV

Grundig

CUC7303

CTV

Hotel Mode

Grundig

CUC7303

CTV

OSD position Band Limits Cancelling

Grundig

CUC7305

CTV

Grundig

CUC7305

CTV

Hotel Mode

Grundig

CUC7305

CTV

OSD position

Grundig

CUC7350

CTV

Hotel Mode

Grundig

CUC7851

CTV

Child Lock Cancel EPROM Version Nr. Child Lock Cancel EPROM Version Nr. Child Lock Cancel

Grundig

CUC7851

CTV

Grundig

CUC7880

CTV

Grundig

CUC7880

CTV

Grundig

CUC7890

CTV

Manufacturer
Grundig

Model

Chassis
CUC7890

Product
CTV

Mode
EPROM Version Nr. Child Lock Cancel EPROM Version Nr.

Enter
Press button 'i' to call up the 'Dialog Center' --> OK. The version number is shown by pressing the 'AUX' button. The index 01 of the part nr. (19798-300.01) indicates the EPROM version. Press VOL+, VOL-, PR-, PR+, OK. Press button 'i' to call up the 'Dialog Center' --> OK. The version number is shown by pressing the 'AUX' button. The index 01 of the part nr. (19798-300.01) indicates the EPROM version. Press the 'CODE' button on the remote control handset. Enter the numers 4 9 3 4 on the remote control handset in this order and confirm with the 'OK' button. Press the STOP button. Press the 'STANDBY' button on the remote control handset until 'FREE' is indicated on the display of the video recorder. Press the 'STAND-BY' button on the RC until 'FREE' appears on the display of the recorder. Enter the numbers 4 9 3 4 on the remote control handset in this order and confirm with the button 'OK'. Press the STOP button. With the video recorder switched off (Stand-by) press the Stop button on the RC until 'UNLO' appears on the display of the recorder. With the video recorder switched off (Stand-by) press the Stop button on the RC until 'UNLO' appears on the display of the recorder. With the video recorder switched off (Stand-by) press the Stop button on the RC until 'FREE' appears on the display of the recorder. Press the 'CODE' button on the remote control handset. Enter the numers 4 9 3 4 on the remote control handset in this order and confirm with the 'OK' button. Press the 'STAND-BY' button or disconnect the recorder from the mains. Press the 'CODE' button on the remote control handset. Enter the numers 4 9 3 4 on the remote control handset in this order and confirm with the 'OK' button. Press the 'STAND-BY' button or disconnect the recorder from the mains. With the video recorder switched off (Stand-by) press the Stop button on the RC until 'UNLO' appears on the display of the recorder. Press the 'CODE' button on the remote control handset. Enter the numers 4 9 3 4 on the remote control handset in this order and confirm with the 'OK' button. Press the 'STAND-BY' button or disconnect the recorder from the mains. With the video recorder switched off (Stand-by) press the Stop button on the RC until 'UNLO' appears on the display of the recorder.

Grundig

CUC7951

CTV

Grundig

CUC7951

CTV

Grundig

GV200 to GV250

VCR

Electronic Lock Cancel

Grundig Grundig

GV201-1 GV25SV/5 GV45SV/5 GV280PC GV280S GV400 GV400GB GV400OST GV4000VPS GV4001 GV4003VPS

VCR VCR

Electronic Lock Cancel Electronic Lock Cancel Electronic Lock Cancel Electronic Lock Cancel Electronic Lock Cancel Electronic Lock Cancel

Grundig

VCR

Grundig

VCR

Grundig

VCR

Grundig

VCR

Grundig

GV400VPS GV401VPT

VCR

Electronic Lock Cancel

Grundig

GV4010SV-VPT GV4092.. GV4192VPS GV4200SV-VPT GV4400HiFi GV4592.. GV402

VCR

Electronic Lock Cancel

Grundig

VCR

Electronic Lock Cancel

Grundig

GV404SV GV405EURO GV406EURO

VCR

Electronic Lock Cancel

Grundig

GV410

VCR

Electronic Lock Cancel

Manufacturer

Model

Chassis

Product

Mode

Enter
Press the 'CODE' button on the remote control handset. Enter the numers 4 9 3 4 on the remote control handset in this order and confirm with the 'OK' button. Press the 'STAND-BY' button or disconnect the recorder from the mains. Press and hold the 'STAND-BY' button on the RC (ca. 5s), until 'UNLOCKED' appears on the display of the recorder. With the video recorder switched off (Stand-by) press the Stop button on the RC until 'UNLO' appears on the display of the recorder. Press the 'CODE' button on the remote control handset. Enter the numers 4 9 3 4 on the remote control handset in this order and confirm with the 'OK' button. Press the 'STAND-BY' button or disconnect the recorder from the mains. With the video recorder switched off (Stand-by) press the Stop button on the RC until 'UNLO' appears on the display of the recorder. Press the 'CODE' button on the remote control handset. Enter the numers 4 9 3 4 on the remote control handset in this order and confirm with the 'OK' button. Press the 'STAND-BY' button or disconnect the recorder from the mains. Press the 'CODE' button on the remote control handset. Enter the numers 4 9 3 4 on the remote control handset in this order and confirm with the 'OK' button. Press the 'STAND-BY' button or disconnect the recorder from the mains. Press the 'CODE' button on the remote control handset. Enter the numers 4 9 3 4 on the remote control handset in this order and confirm with the 'OK' button. Press the 'STAND-BY' button or disconnect the recorder from the mains. Press the 'STAND-BY' button on the RC until 'FREE' appears on the display of the recorder.

Grundig

GV410VPS GV411

VCR

Electronic Lock Cancel

Grundig

GV411-1 GV411OST GV412

VCR

Electronic Lock Cancel Electronic Lock Cancel

Grundig

VCR

Grundig

GV414SV GV415EURO GV416EURO GV420VPT

VCR

Electronic Lock Cancel

Grundig

GV430 GV430GB

VCR

Electronic Lock Cancel

Grundig

GV430VPS GV434SV GV435EURO

VCR

Electronic Lock Cancel

Grundig

GV440.. GV450.. GV460.. GV464.. GV465EURO GV470..

VCR

Electronic Lock Cancel

Grundig

GV500.. GV501VPT GV505EURO GV506EURO GV5000 GV5000GB GV5000VPS GV5000VPS/5 GV5002VPS GV5003 GV5008 GV5050 GV5050SV GV5050SV/1 GV5055EURO GV5095..

VCR

Electronic Lock Cancel

Grundig

VCR

Electronic Lock Cancel

Grundig

VCR

Electronic Lock Cancel

Press the 'STAND-BY' button on the RC until 'FREE' appears on the display of the recorder. Press the 'CODE' button on the remote control handset. Enter the numers 4 9 3 4 on the remote control handset in this order and confirm with the 'OK' button. Press the 'STAND-BY' button or disconnect the recorder from the mains.

Grundig

VCR

Electronic Lock Cancel

Manufacturer

Model
GV510SV GV511 GV515EURO GV530.. GV535EURO GV540.. GV545EURO GV560.. GV565EURO GV5300..

Chassis

Product

Mode

Enter
Press the 'CODE' button on the remote control handset. Enter the numers 4 9 3 4 on the remote control handset in this order and confirm with the 'OK' button. Press the 'STAND-BY' button or disconnect the recorder from the mains. Press the 'STAND-BY' button on the RC until 'FREE' appears on the display of the recorder. Press the 'CODE' button on the remote control handset. Enter the numers 4 9 3 4 on the remote control handset in this order and confirm with the 'OK' button. Press the 'STAND-BY' button or disconnect the recorder from the mains.

Grundig

VCR

Electronic Lock Cancel

Grundig

VCR

Electronic Lock Cancel

Grundig

GV5395.. GV5400.. GV5695HiFi

VCR

Electronic Lock Cancel

Grundig

GV600 GV630 GV640HiFi GV640NIC GV645EURO GV650HiFi GV660HiFi GV660NIC GV665EURO GV670SHiFi GV670SNIC GV690SHiFi GV690SNIC GV6096SV GV6096SV/1 GV6396SV GV6596HiFi GV6596NIC

VCR

Electronic Lock Cancel

Press the 'CODE' button on the remote control handset. Enter the numers 4 9 3 4 on the remote control handset in this order and confirm with the 'OK' button. Press the 'STAND-BY' button or disconnect the recorder from the mains.

Grundig

VCR

Electronic Lock Cancel

Press the 'CODE' button on the remote control handset. Enter the numers 4 9 3 4 on the remote control handset in this order and confirm with the 'OK' button. Press the 'STAND-BY' button or disconnect the recorder from the mains. Press the 'CODE' button on the remote control handset. Enter the numers 4 9 3 4 on the remote control handset in this order and confirm with the 'OK' button. Press the 'STAND-BY' button or disconnect the recorder from the mains. Press and hold down the buttons 'STAND-BY' and 'SELECT' simultaneously on the RC until key simbol disappears from the display of the recorder. Press the 'CODE' button on the remote control handset. Enter the numers 4 9 3 4 on the remote control handset in this order and confirm with the 'OK' button. Press the 'STAND-BY' button or disconnect the recorder from the mains. Press and hold down the buttons 'STAND-BY' and 'SELECT' simultaneously on the RC until key simbol disappears from the display of the recorder.

Grundig

GV740.. GV745EURO

VCR

Electronic Lock Cancel

Grundig

GV7400..

VCR

Electronic Lock Cancel

Grundig

GV7497NIC

VCR

Electronic Lock Cancel

Grundig

GV8.. KV8.. SE8..

VCR

Electronic Lock Cancel

Manufacturer
Grundig Grundig Grundig

Model
GVP600ICNEURO KV5001VPS/5 KV5301VPS/5 MV4005 MV4105

Chassis

Product
VCR VCR VCR

Mode
Electronic Lock Cancel Electronic Lock Cancel Electronic Lock Cancel

Enter
Press the 'STAND-BY' button on the RC until 'FREE' appears on the display of the recorder. Press the 'STAND-BY' button on the RC until 'FREE' appears on the display of the recorder. With the video recorder switched off (Stand-by) press the Stop button on the RC until 'UNLO' appears on the display of the recorder. Press the 'CODE' button on the remote control handset. Enter the numers 4 9 3 4 on the remote control handset in this order and confirm with the 'OK' button. Press the 'STAND-BY' button or disconnect the recorder from the mains. Press the 'CODE' button on the remote control handset. Enter the numers 4 9 3 4 on the remote control handset in this order and confirm with the 'OK' button. Press the 'STAND-BY' button or disconnect the recorder from the mains. Press the 'CODE' button on the remote control handset. Enter the numers 4 9 3 4 on the remote control handset in this order and confirm with the 'OK' button. Press the 'STAND-BY' button or disconnect the recorder from the mains. Press the 'CODE' button on the remote control handset. Enter the numers 4 9 3 4 on the remote control handset in this order and confirm with the 'OK' button. Press the 'STAND-BY' button or disconnect the recorder from the mains. Press and hold down the buttons 'STAND-BY' and 'SELECT' simultaneously on the RC until key simbol disappears from the display of the recorder. Press the 'CODE' button on the remote control handset. Enter the numers 4 9 3 4 on the remote control handset in this order and confirm with the 'OK' button. Press the 'STAND-BY' button or disconnect the recorder from the mains. Press and hold STOP button on the RC and depress the PLAY button on the video recorder. Press the 'STAND-BY' button or disconnect the video recorder from the mains. Press the cursor buttons on the RC in this order: VOL+, VOL-, PR+, PR-. Interconnect the service test points on the keyboard control unit for a short period. Switch the unit off and disconnect it from mains.

Grundig

SE4100VPS SE4104SV SE4120SV

VCR

Electronic Lock Cancel

Grundig

SE5102SV SE5104SV SE5106HiFi

VCR

Electronic Lock Cancel

Grundig

SE6102SV SE6104SV SE6106HiFi

VCR

Electronic Lock Cancel

Grundig

SE7104SV

VCR

Electronic Lock Cancel

Grundig

SE7105

VCR

Electronic Lock Cancel

Grundig

SE7106HiFi

VCR

Electronic Lock Cancel

Grundig

TVR3700 TVR3701 TVR3705 TVR3710 TVR3720 TVR3730 TVR4500 TVR4510

VCR

Electronic Lock Cancel

Grundig

VCR

Electronic Lock Cancel

Grundig

VCR

Electronic Lock Cancel

Manufacturer
Grundig

Model
TVR5100 TVR5130 TVR5500 TVR5510

Chassis

Product
VCR

Mode
Electronic Lock Cancel Electronic Lock Cancel Electronic Lock Cancel

Enter
Press the cursor buttons on the RC in this order: VOL+, VOL-, PR+, PR-. Interconnect the service test points on the keyboard control unit for a short period. Switch the unit off and disconnect it from mains. Press the cursor buttons on the RC in this order: VOL+, VOL-, PR+, PR-. Switch the video recorder off. Remove the top of the cabinet. Unplug the B1 connector on the sequence control. Switch the recorder on. After approx. 2 seconds, re-insert the B1 connector. Switch the video recorder off. Re-fit the top of the cabinet. Switch the video recorder off. Remove the top of the cabinet. Switch the recorder on. Interconnect the service test points on the keyboard control unit for a short period. Press the STOP button. Switch the video recorder off. Re-fit the top of cabinet. Enter the numbers 4 9 3 4 on the remote control handset in this order and confirm with the button '0000'. Press the STOP button. Enter the numbers 4 9 3 4 on the remote control handset in this order and confirm with the button 'OK'. Press the STOP button. Switch the video recorder off. Remove the top of the cabinet. Switch the recorder on. Interconnect the service test points on the keyboard control unit for a short period. Press the STOP button. Switch the video recorder off. Re-fit the top of cabinet. Enter the numbers 4 9 3 4 on the remote control handset in this order and confirm with the button 'OK'. Press the STOP button. MUTE --> OK (M) --> TV Controls: cursor buttons. Store: OK (M). Exit: TV Simultaneous press OK on RC & local panel. Simultaneous press OK on RC & local panel. Simultaneous press CM on the RC & "Service" key on the control panel. Select: MEM IN/OUT. Adjust: VOL +/-. Store: X. Exit: TV. Simultaneous press VT on the RC & "Service" key on the control panel. Select: MEM IN/OUT. Adjust: VOL +/-. Store: X. Exit: TV.

Grundig

VCR

Grundig

TVR5530

VCR

Grundig

VS200 to VS267

VCR

Electronic Lock Cancel

Grundig

VS300 to VS460

VCR

Electronic Lock Cancel

Grundig

VS500

VCR

Electronic Lock Cancel

Grundig

VS505 to VS510

VCR

Electronic Lock Cancel

Grundig

VS520 to VS550

VCR

Electronic Lock Cancel

Grundig

VS600 to VS960

VCR

Electronic Lock Cancel

ITT LG LG Loewe. MC64 MC84 Art.-Nr. 64420 66426 66449 66450 66460 66480 66490 Art.-Nr. 64420 66426 66449 66450 66460 66480 66490

STEREO PLUS

CTV CTV CTV

Service Mode Service Mode Service Mode TV Service Mode

C9000

CTV

Loewe.

C9000

CTV

VT Service Mode

Loewe.

C9003

CTV

On the local control press function key five times (indication "Service" will appear), afterwards Service Mode within a sec. press key "MEN" on the remote control. Store: X. Exit: TV. Service Mode Go to 'SERVICE' in menu and then quick press 'MENU' on the RC. Select: yellow cursors. Adjust: +/-. Store: 'X'. Exit: 'TV'.

Loewe.

Q2200

CTV

Manufacturer
Luxor Mitsubishi

Model
5585-21A1 7057-27 63/7954 CT21M5E XExx XPxx XVxx 6364, 7364

Chassis
STEREO PLUS

Product
CTV CTV

Mode
Service Mode Service Mode

Enter
MUTE --> OK (M) --> TV Controls: cursor buttons. Store: OK (M). Exit: TV Press S701 (on board) and button 9 (in 5s). Store: '0'. Exit: stand-by. Select DISPLAY MODE. Press PROCEED. Press and hold RESET. Then simultaneous press + & -. 'Warning Entering Service Menu...' appears. Press PROCEED for enter. Be careful! You can damage a monitor! Quick press: --\-, MENU, TV. In 1s press buttons '-/--', 'MENU', 'TV'. Select: PR+/-. Adjust: VOL+/-. Store: fill-dot-symbol on RC (near 'i' button). Exit: 'STANDBY'. MUTE --> OK (M) --> TV Controls: cursor buttons. Store: OK (M). Exit: TV i --> M --> PROGR. Controls: cursor buttons. Store: M. Exit: TV Switch to Standby. Switch off with the mains switch. Press and hold red button on RC and then switch on with the mains switch (cca 10s). Select: numbers buttons. Adjust: +/-. Store: red button. Exit: 'MUTE'. Switch to Standby. Switch off with the mains switch. Press and hold red button on RC and then switch on with the mains switch (cca 10s). Select: numbers buttons. Adjust: +/-. Store: red button. Exit: 'MUTE'. After replacement of the MDA2061 (IR73) the TV receiver acts as folows: a) All programme storages have stored Ch00. b) The indicator shows German function characters. c) PAL and SECAM EAST standard recepcion is possible (not NTSC and/or SECAM WEST). If required to change according to paragr. b and c then switch off the set by the mains switch. Press both buttons + and - for volume on TV and simultaneously switch the set on with the mains switch. Keep the two volume buttons pressed until the display indicates Pr. After 8s the display indicates __. Now the following buttons can be presseed on the RC, thus additional corresponding segments will be illuminated: Button '1' function symbols indicate international display. Reversible to German display with button '2'. Button '5' additional SECAM WEST and/or NTSC reception (Multistandard). Reversible to Single Standard with button '3'. Store: Stand-By. Switch to Stand By. Switch off with the mains switch. Press and hold 'VT' on RC then switch on with the mains switch.

NEC

MON

Service Mode

Nokia Nokia

2B-F EUROSTEREO

CTV CTV

Service Mode Service Mode

Nokia

63/7168 55A1-0 45H1-0 55Y2-0 63/7157 63/7177

STEREO PLUS

CTV

Service Mode

Nokia

STEREO PLUS

CTV

Service Mode

Nordmende

DC1

CTV

Service Mode

Nordmende

DC2

CTV

Service Mode

Nordmende

Color 3038

F15-03 110°

CTV

MDA2061 Replacement

Nordmende

ICC10

CTV

Service Mode

Manufacturer

Model

Chassis

Product

Mode

Enter

Nordmende

ICC9

CTV

Switch off TV with RC (st-by). Switch off TV with main switch. Wait a few sec till ST_BY LED switch off. Simultaneous press blue button on Service Mode RC and switch on TV with main switch. Press blue button again. (WARNING: scart must be free.) Simultaneous press red & blue buttons on RC then (in 5 sec.) simultaneously press P- & P+ on local keyboard. Commands: arrows. Store: OK. Exit: TV. In Sound-Menu Low-tone-regel to MAX and High-tone-regel to MIN. Press VOL- on TV and RESET on RC in some time. Select: red and green buttons. Adjust: yellow and blue buttons. Store: 'STORE'. Exit: switch off. In Sound-Menu Low-tone-regel to MAX and High-tone-regel to MIN. Press 'F' button on TV. Then press VOL- on TV and REVEAL on RC in some time. Select: red and green buttons. Adjust: yellow and blue buttons. Store: 'STR'. Exit: 'N' on RC. ON: Press simultaneously 'OFF TIMER' on RC and 'CH.UP' local. OFF: Press simultaneously 'OFF TIMER' on RC and 'VOL-' local. Simultaneously press 'RECALL' on RC and 'VOL-' local. Exit: 'NORMAL' on RC. ON: Set HOTEL ON in Service Menu. Select programm 38. Simultaneous press (3 sec) INSTALL & P- on local keyboard. OFF: Set HOTEL OFF in Service Menu. Simultaneously press VOL+ & P- on RC. Exit: STANDBY. OFF: Select programm 38. Simultaneous press (3 sec) PR+ & VOL- on local keyboard. ON: Select programm 38. Simultaneous press (3 sec) STORE & PR- on local keyboard. With special service RC. Or short M25, M25 on board and then switch on TV. Exit: st-by. Select program 38 on the TV. Simultaneously press the keys VOLUME- and VOLUME+ on the keyboard of the TV and the OSD key of the remote control. This model also supports the 062596 sequence followed by [MENU] (service default) or [i+]/[OSD] (service mode). There is a small Service jumper to short on the small signal PCB. When the TV is in this first level service mode, you can go in the second level service mode by pressing both MENU and - keys on top of the TV at the same time. There you can read much parameters and proceed with most of the adjustments. In fact this method let you use an ordinary Remote control but you also need to open the back cover. With the special service remote control, a special code is sent to enter the service mode.

Palladium

TV-100

CTV

Service Mode

Panasonic

EURO-1

CTV

Service Mode

Panasonic

EURO-2

CTV

Service Mode

Panasonic

MX-3 MX-3C MX-3 MX-3C ANUBIS B

CTV

Hotel Mode

Panasonic

CTV

Service Mode

Philips

CTV

Hotel Mode

Philips

ANUBIS B

CTV

Service Mode

Philips

Anubis S

CTV

Hotel Mode

Philips

L7.1A

CTV

Service Mode

Philips

L9.1

CTV

Hotel Mode

Philips

L9H

CTV

Service Mode

Philips

MD1.2E

CTV

Service Mode

Manufacturer

Model

Chassis

Product

Mode

Enter

Philips

MG3.1E

CTV

Option 1: In the TV-set itself is a 3-pin connector with which either SERVICE-DEFAULT or SERVICE-MODE can be activated. This connector is depicted 0356 (SERVICE-PINS) on page K7 (TXT&CONTROL). Shorting pins 1-2 will activate SERVICE-MODE. Shorting pins 2-3 will activate SERVICE-DEFAULT. Option 2: Activate these modes using the remote control. Obviously option 2 is the preferred method because the settings have to be changed using a remote control anyway.... To activate SERVICE-DEFAULT: Press 0 6 2 5 9 6 and then the [menu] button. The message `Service Default' Service Mode appears and channel `SER T' will be selected. This only sets some settings to a preset value (color/brightness/volume and such). This mode is primarily intended to be used when the non volatile memory has been replaced. It is then loaded with the default values. To activate SERVICE-MODE: Press 0 6 2 5 9 6 and then the [i+] button. After pressing 0 6 2 5 9 6 the message `Dealer' should have appeared. Do not worry about the channel changing while you press the numbers. Service technicians have the m service mode using a special re Use the standard remote control an key in a special sequence 0 6 2 5 9 6 followed by pressing the 'MENU' button. If the main menu also appears with the service menu just press 'MENU' again to clear it. The other way is to Service Mode short the two service pins on the signal panel (pins 2 and 3 of connector 0356). The advantage of this last method is that all the software protections are turned off. Use the standard remote control an key in a special sequence 0 6 2 5 9 6 followed by pressing the 'MENU' button. If the main menu also appears with the service menu just press 'MENU' again to clear it. Without cassette. Press and hold SYSTEM till 'G591' appears. Press and hold CLEAR(CL) till 'MOFF' appears. Exit: TV/STANBY. Without cassette. Press and hold SYSTEM till 'MOFF' appears. Press and hold CLEAR(CL) till 'G591' appears. Exit: TV/STANBY. Press CHILD LOCK (key-simbol) on the RC for 5s with the VCR switched on. Without cassette. Press and hold STOP on the RC and then press STOP/EJECT on VCR. Select the line 'MODULATOR' on the TV screen or 'MOD+' in the display with P+/-. In the display select 'OFF' / 'MOD-' (modulator off) with VOLor 'MOD+' (modulator on). Confirm with OK. Exit with MENU

Philips

29PT9416

MG7.1

CTV

Philips

Y6

CTV

Service Mode

Philips

VR210/58

VCR

Modulator off Modulator on Child Lock Cancel

Philips Philips

VR210/58 VR220/58

VCR VCR

Philips

VR220/58

VCR

Modulator on/off

Manufacturer

Model

Chassis

Product

Mode

Enter
Without cassette. Hold the STOP button on the RC. In addition press the STOP/EJECT button on the VCR until the pre-set modulator frequency appears in the display, e.g. 'M591' (591MHz or 36 ch. UHF). Select line 'OPTIMIZE FREQUENCY' using P+/-. Enter new modulator frequency with the numbers 0-9. In line 'SOUND SYSTEM' select the TV system using VOL+/-. 'G' = PAL B/G. 'K' = SECAM D/K. Confirm with OK. 'STORED' will appear briefly on the screen. Disconect from the mains power supply. Press and hold the STANDBY/ON button on the device and reconnect to the mains power supply. Release the button when 'OSD' appears in the VCR display. Press and hold STOP till [] appears. Without cassette. Press and hold SYSTEM till 'G591' appears. Press and hold CLEAR(CL) till 'MOFF' appears. Exit: TV/STANBY. Without cassette. Press and hold SYSTEM till 'MOFF' appears. Press and hold CLEAR(CL) till 'G591' appears. Exit: TV/STANBY. Without cassette. VCR st-by. Press and hold SYSTEM till 'G591' appears. System change: SELECT. Freq. Change: P +/-. Store: OK. Exit: TV/STANBY.

Philips

VR220/58

VCR

Modulator preset

Philips

VR220/58

VCR

Reset to factory settings Auto ST-BY off Modulator off Modulator on Modulator preset

Philips Philips

VR400/58 VR400/58

VCR VCR

Philips

VR400/58

VCR

Philips

VR400/58

VCR

Revox

D-TV

C9003

CTV

On the local control press function key five times (indication "Service" will appear), afterwards Service Mode within a sec. press key "MEN" on the remote control. Store: X. Exit: TV. Switch off set with main switch. Switch on set with main switch and during doing this press the buttons + and - of volume control on the set's control bord simultaneously until the display lights. Display: SS... Press the button 'S' on the RC. Switch off with RC. Now the combination lock is unlocked and one can switch on again in the normal manner.

Saba

ULTRACOLOR T55U42 T55U43 T63U42 T63U43

ICC5115ML 110 ICC5116MM 90°

CTV

Combination Lock Cancel

Saba

ICC9

CTV

Switch off TV with RC (st-by). Switch off TV with main switch. Wait a few sec till ST_BY LED Service Mode switch off. Simultaneous press VT button on RC and switch on TV with main switch. Press VT button again. (WARNING: scart must be free.) Put TV into standby, then turn power off, then turn power on whilst holding standby button on remote and step through menus to `vol set` and increase level to max. Quick press: --\-, MENU, TV. MUTE --> OK (M) --> TV Controls: cursor buttons. Store: OK (M). Exit: TV

Saba Salora Salora

T7032VT 28N8S 17/21SF 25/28X71 25/28SP50

TX92 2B-F STEREO PLUS

CTV CTV CTV

Hotel Mode Cancel Service Mode Service Mode

Manufacturer

Model
CB-14F1 CB-20P30 CB-20H1 CB-20S20 CB-21H1 CB-21P30 CB-21S20 CB-3373 CB-5020 CB-5073 CB-5079 CB-5320 CB-5373 CB-5379

Chassis

Product

Mode

Enter

Samsung

S15A

CTV

Service Mode

STAND-BY --> DISPLAY --> P.STD --> MUTE --> POWER ON. Controls: VOL +/-, CH +/-. Exit: POWER OFF.

Samsung

CK5038

SCT11B

CTV

Service Mode

Samsung

CX5944 CX6844 CB-14V10 CB-3373 CB-14V20 CB-5073 CB-20P30 CB-5079 CB-20S10 CB-5373 CB-20S20 CB-21P30 CB-21S10 CB-21S20 CS7272 CS-721 CS-723 TVP3350 TVP5050

SCT12B

CTV

Service Mode

STAND-BY --> P.STD --> HELP --> SLEEP --> POWER ON. Controls: VOL +/-, CH +/-. Exit: STATUS. STAND-BY --> P.STD --> HELP --> SLEEP --> POWER ON. FACTORY MODE: set PSL=15 and PVA=63. Controls: VOL +/-, CH +/-. Exit: STATUS

Samsung

SCT13B

CTV

Service Mode

STAND-BY --> P.STD --> HELP --> SLEEP --> POWER ON. Controls: VOL +/-, CH +/-. Exit: STATUS.

Samsung Samsung Samsung Schneider

SCT51A SCT52A SCV11A SCV11B DTV 1

CTV CTV

Service Mode Service Mode

CTV/VCR Service Mode CTV Service Mode

Schneider

DTV 100

CTV

Service Mode

PICTURE OFF --> SLEEP --> P.STD --> MUTE --> PICTURE ON PICTURE OFF --> SLEEP --> P.STD --> MUTE --> PICTURE ON STAND-BY --> P.STD --> MENU --> SLEEP --> POWER ON Simultaneous press Service-button on digibord & button C on RC. Selection: Bass +/-. Adjust: Volume +/-. Store: T. Exit: TV. Simultaneous press red & blue buttons on RC then (in 5 sec.) simultaneous press P- & P+ on local keyboard. Commands: arrows. Store: OK. Exit: TV.

Schneider

DTV 2

CTV

Like DTV 1 or simultaneous press Servicebutton (down right on RC) & C button on RC. Service Mode Selection: Bass +/-. Adjust: Volume +/-. Store: IDEAL. Exit: TV. Simultaneous press red & blue buttons on RC then (in 5 sec.) simultaneous press P- & VOL+ on local keyboard. Selection: wheel. Adjust: ring. Store: red button. Exit: OFF. Simultaneous press red & blue buttons on RC then (in 5 sec.) simultaneous press P- & VOL+ on local keyboa