Text preview for : Panel_LG_Display_LC320WUE-SBR1_0_[DS].pdf part of . Various Panel LG Display LC320WUE-SBR1 0 [DS] . Various LCD Panels Panel_LG_Display_LC320WUE-SBR1_0_[DS].pdf



Back to : Panel_LG_Display_LC320WUE | Home

Global LCD Panel Exchange Center www.panelook.com




LC320WUE


Engineering Specification




SPECIFICATION
FOR
APPROVAL



( ) Preliminary Specification
( ) Final Specification

Title 32.0" WUXGA TFT LCD

BUYER General SUPPLIER RAKEN

MODEL *MODEL LC320WUE
SUFFIX SBR1(ROHS Verified)
*When you obtain standard approval,
please use the above model name without suffix


SIGNATURE SIGNATURE
APPROVED BY APPROVED BY
DATE DATE

/ / Team Leader



REVIEWED BY

/ / PM




PREPARED BY
/ / Engineer


Please return 1 copy for your confirmation with LCM R&D Dept.
your signature and comments. RAKEN Technology Co., Ltd


Ver. 0.1 1 /39




One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com




LC320WUE


Engineering Specification

CONTENTS
Number ITEM Page
COVER 1

CONTENTS 2
RECORD OF REVISIONS 3

1 GENERAL DESCRIPTION 4

2 ABSOLUTE MAXIMUM RATINGS 5

3 ELECTRICAL SPECIFICATIONS 6

3-1 ELECTRICAL CHARACTERISTICS 6

3-2 INTERFACE CONNECTIONS 10

3-3 SIGNAL TIMING SPECIFICATIONS 12
3-4 DATA MAPPING AND TIMING 13

3-5 PANEL PIXEL STRUCTURE 14

3-6 POWER SEQUENCE 15

4 OPTICAL SPECIFICATIONS 16

5 MECHANICAL CHARACTERISTICS 20

6 RELIABILITY 23

7 INTERNATIONAL STANDARDS 24

7-1 SAFETY 24

7-2 EMC 24

8 PACKING 25

8-1 DESIGNATION OF LOT MARK 25

8-2 PACKING FORM 25
9 PRECAUTIONS 26
9-1 MOUTING PRECAUTIONS 26

9-2 OPERATING PRECAUTIONS 26

9-3 ELECTROSTATIC DISCHARGE CONTROL 27

9-4 PRECAUTION FOR STRONG LIGHT EXPOSURE 27

9-5 STORAGE 27
9-6 HANDING PRECAUTION FOR PROTECTION FILM 27

Ver. 0.1 2 /39




One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com




LC320WUE


Engineering Specification

RECORD OF REVISIONS

Revision No. Revision Date Page Description
0.1 Aug, 03, 2009 - Preliminary Specification




Ver. 0.1 3 /39




One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com




LC320WUE


Engineering Specification

1. General Description
The LC320WUE is a Color Active Matrix Liquid Crystal Display with an integral External Electrode Fluorescent
Lamp (EEFL) backlight system. The matrix employs a-Si Thin Film Transistor as the active element.
It is a transmissive display type which is operating in the normally black mode. It has a 31.55 inch diagonally
measured active display area with WUXGA resolution progressive mode (1080 vertical by 1920 horizontal
pixel array).
Each pixel is divided into Red, Green and Blue sub-pixels or dots which are arrayed in vertical stripes.
Gray scale or the luminance of the sub-pixel color is determined with a 10-bit gray scale signal for each dot.
Therefore, it can present a palette of more than 1.06B(true) colors.
It has been designed to apply the 10-bit 2-port LVDS interface.
It is intended to support LCD TV, PCTV where high brightness, super wide viewing angle, high color gamut,
high color depth and fast response time are important.

Mini-LVDS(RGB)
EEPROM
Source Driver Circuit
SCL SDA S1 S1920
+12.0V
G1
Gate Driver Circuit



LVDS
Timing Controller
2Port
CN1 [LVDS Rx + OPC + ODC
Reverse (51pin)
integrated]
LVDS Select TFT - LCD Panel
Bit Select (1920 RGB 1080 pixels)
OPC Enable
ExtVBR-B Power Circuit G1080

VBR-B out Block

High Input CN2, 3pin, 18 Lamps/@135 mA
Back light Assembly
High Input CN3, 3pin, 18 Lamps/@135mA


General Features
Active Screen Size 31.55 inches(801.31mm) diagonal
Outline Dimension 760 (H) x 450 (V) x 47.5 mm(D) (Typ.)
Pixel Pitch 0.36375 mm x 0.36375 mm
Pixel Format 1920 horiz. by 1080 vert. Pixels, RGB stripe arrangement
Color Depth 10-bit(D), 1.06 B colors
Luminance, White 500 cd/m2 (Center 1point ,Typ.)
Viewing Angle (CR>10) Viewing angle free ( R/L 178 (Min.), U/D 178 (Min.))
Total 116.2 W (Typ.) (Logic=6.2 W, Back Light=110W with Inverter ,Control
Power Consumption
PCB)
Weight 5.7Kg(TBD)
Display Mode Transmissive mode, Normally black
Surface Treatment Hard coating(3H), Anti-glare treatment of the front polarizer (Haze 10%)


Ver. 0.1 4 /39




One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com




LC320WUE


Engineering Specification

2. Absolute Maximum Ratings

The following items are maximum values which, if exceeded, may cause faulty operation or damage to the
LCD Panel.

Table 1. ABSOLUTE MAXIMUM RATINGS



Value
Parameter Symbol Unit Remark
Min Max

Power Input
LCD circuit VLCD -0.3 +14.0 V [DC] r
Voltage

Operating r
B/L Input voltage Voltage (one VOP 700 1100 V[ RMS] Burst Dimming Duty
side) 100%

Operating Temperature TOP 0 +50 C

Storage Temperature TST -20 +60 C
Note 1
Operating Ambient Humidity HOP 10 90 %RH

Storage Humidity HST 10 90 %RH




Notes : 1. Temperature and relative humidity range are shown in the figure below.
Wet bulb temperature should be Max 39 C and no condensation of water.
2. Gravity mura can be guaranteed below 40 condition.

90%

60
60%

50 Storage
Humidity [(%)RH]




Wet Bulb
Temperature [ C]
40
40%
Operation
30

20
10
0
10%


-20 0 10 20 30 40 50 60 70 80

Dry Bulb Temperature [ C]


Ver. 0.1 5 /39




One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com




LC320WUE


Engineering Specification

3. Electrical Specifications
It requires two kind of power inputs.
One is employed to power for the LCD circuit. The other Is used for the EEFL backlight circuit.

3-1. Electrical Characteristics
Table 2. DC ELECTRICAL CHARACTERISTICS


Value
Parameter Symbol Unit Note
Min Typ Max

Circuit :

Power Input Voltage VLCD 10.8 12.0 13.2 VDC

- 500 650 mA 1
Power Input Current ILCD
- 690 900 mA 2

Power Consumption PLCD - 6.2 8.1 Watt 1

Rush current IRUSH - - 3.0 A 3


Notes : 1. The specified current and power consumption are under the VLCD=12.0V, 25 r 2 C, fV=60Hz
condition whereas mosaic pattern(8 x 6) is displayed and fV is the frame frequency.
2. The current is specified at the maximum current pattern.
3. The duration of rush current is about 2ms and rising time of power input is 0.5ms (min.).


White : 1023Gray
Black : 0Gray




Mosaic Pattern(8 x 6)



Ver. 0.1 6 /39




One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com




LC420WUE
Product Specification

Table 3. ELECTRICAL CHARACTERISTICS for IPB& Lamp (Continue)
Values
Parameter Symbol Unit Notes
Min Typ Max
Backlight Assembly :
Operating Voltage
VBL 800 950 1100 VRMS 1, 2
(one side,fBL=62KHz, IBL= 135mArms))

Operating Current (one side) IBL 130 135 140 mARMS 1

Established Starting 0 - - 1225
VS VRMS 1, 3
Voltage (one side) 25 - - 1020
Operating Frequency fBL 43 45 47 kHz 4
Striking Time S TIME - - 2.0 sec 3
Power Consumption PBL 67 74 Watt 6
Burst Dimming Duty PWM duty 20 100 % 9
Burst Dimming Frequency 1/T 98 - 182 Hz 9

Values
Parameter Symbol Unit Notes
Min Typ Max
Lamp : APPENDIX
Lamp Voltage (one side) VLAMP 820 1035 1075 VRMS 2
Lamp Current (one side) ILAMP 3 7.5 8 mARMS
Discharge Stabilization Time TS - - 3 Min 5
Lamp Frequency f LAMP 40 65 80 KHz
Lamp Temperature TLAMP 130 C
Established Starting 0 VS 1225
VRMS 3
Voltage (one side) 25 VS 1020
Life Time 50,000 Hrs 7
Notes : The design of the inverter must have specifications for the lamp in LCD Assembly.
The electrical characteristics of inverter are based on High-High Driving type.
The performance of the lamps in LCM, for example life time or brightness, is extremely influenced by
the characteristics of the DC-AC inverter. So, all the parameters of an inverter should be carefully
designed so as not to produce too much leakage current from high-voltage output of the inverter.
When you design or order the inverter, please make sure unwanted lighting caused by the mismatch
of the lamp and the inverter (no lighting, flicker, etc) has never been occurred. When you confirm it,
the LCD