Text preview for : Panel_CMO_V315H1-PH1_0_[DS].pdf part of . Various Panel CMO V315H1-PH1 0 [DS] . Various LCD Panels Panel_CMO_V315H1-PH1_0_[DS].pdf
Back to : Panel_CMO_V315H1-PH1_0_[D | Home
Global LCD Panel Exchange Center www.panelook.com
Issued Date: Jan. 21, 2009
Model No.: V315H1-PH1
Approval
TFT LCD Approval Specification
MODEL NO.:V315H1-PH1
Customer:
Approved by:
Note:
TVHD
Approved By
LY Chen
QRA Dept. Product Development Div.
Reviewed By
Tomy Chen WT Lin
LCD TV Marketing and Product Management Div.
Prepared By
WY Li Cindy_Yang
1
Version2.0
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
Issued Date: Jan. 21, 2009
Model No.: V315H1-PH1
Approval
- CONTENTS -
REVISION HISTORY ------------------------------------------------------- 3
1. GENERAL DESCRIPTION ------------------------------------------------------- 4
1.1 OVERVIEW
1.2 CHARACTERISTICS
1.3 MECHANICAL SPECIFICATIONS
2. ABSOLUTE MAXIMUM RATINGS ------------------------------------------------------- 5
2.1 ABSOLUTE RATINGS OF ENVIRONMENT (BASED ON CMO MODULE V315H1-LH1)
2.2 ABSOLUTE RATINGS OF ENVIRONMENT (OPEN CELL)
2.3 ELECTRICAL ABSOLUTE RATINGS (OPEN CELL)
3. ELECTRICAL CHARACTERISTICS ------------------------------------------------------- 7
3.1 TFT LCD OPEN CELL
3.2 RSDS CHARACTERISTICS
4. BLOCK DIAGRAM ------------------------------------------------------- 8
4.1 TFT LCD OPEN CELL
5. INPUT TERMINAL PIN ASSIGNMENT ------------------------------------------------------- 9
5.1 TFT LCD MODULE
5.2 COLOR DATA INPUT ASSIGNMENT
6. INTERFACE TIMING ------------------------------------------------------- 14
6.1 INPUT SIGNAL TIMING SPECIFICATIONS
6.2 INTERNAL SIGNAL TIMING SPECIFICATIONS (FRC T-CON)
6.3 POWER ON/OFF SEQUENCE
7. OPTICAL CHARACTERISTICS ------------------------------------------------------- 17
7.1 TEST CONDITIONS
7.2 OPTICAL SPECIFICATIONS
8. DEFINITION OF LABELS ------------------------------------------------------- 20
8.1 OPEN CELL LABEL
8.2 CARTON LABEL
9. PACKAGING ------------------------------------------------------- 21
9.1 PACKING SPECIFICATIONS
9.2 PACKING METHOD
10. PRECAUTIONS ------------------------------------------------------- 23
10.1 ASSEMBLY AND HANDLING PRECAUTIONS
10.2 SAFETY PRECAUTIONS
11. MECHANICAL DRAWING ------------------------------------------------------- 24
2
Version2.0
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
Issued Date: Jan. 21, 2009
Model No.: V315H1-PH1
Approval
REVISION HISTORY
Page
Version Date Section Description
(New)
Ver 2.0 Jan.21, 2009 All All Approval Specification was first issued.
3
Version2.0
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
Issued Date: Jan. 21, 2009
Model No.: V315H1-PH1
Approval
1. GENERAL DESCRIPTION
1.1 OVERVIEW
V315H1-PH1 is a 31.5" TFT Liquid Crystal Display module. This module supports 1920* 1080 FHDTV format
and can display 1.073G colors (10bit/color).
1.2 CHARACTERISTICS
CHARACTERISTICS ITEMS SPECIFICATIONS
Screen Diagonal [in] 31.51
Pixels [lines] 1920*1080
Active Area [mm] 698.4 (H) x 392.85 (V) (31.51" diagonal)
Sub -Pixel Pitch [mm] 0.12125 (H) x 0.36375 (V)
Pixel Arrangement RGB vertical stripe
Weight [g] TYP. 1215
Physical Size [mm] 716.1(W) x 410(H) x 1.79(D) Typ.
Display Mode Transmissive mode / Normally black
Contrast Ratio 4000:1 Typ.
(Typical value measured at CMO's module)
Glass thickness (Array/CF) [mm] 0.7 / 0.7
Viewing Angle (CR>20) +88/-88(H),+88/-88(V) Typ.
(Typical value measured at CMO's module)
Color Chromaticity R=(0.633, 0.322)
G=(0.280, 0.607)
B=(0.146, 0.055)
W=(0.280, 0.290)
(Typical value measured at CMO's module)
Cell Transparency [ ] 4.6%Typ.
(Typical value measured at CMO's module)
Polarizer (CF side) Glare coating,Hard coating (3H) 709.7(H) x 405(w)..
Polarizer (TFT side) Super Wide View, 709.7(H) x 405(w)..
1.3 MECHANICAL SPECIFICATIONS
Item Min. Typ. Max. Unit Note
Weight 1115 1215 1315 g -
I/F connector mounting The mounting inclination of the connector makes
(2)
position the screen center within