Text preview for : Panel_LG-Philips_LCD_LP150X05-A2C1_0_[DS].pdf part of . Various Panel LG-Philips LCD LP150X05-A2C1 0 [DS] . Various LCD Panels Panel_LG-Philips_LCD_LP150X05-A2C1_0_[DS].pdf
Back to : Panel_LG-Philips_LCD_LP15 | Home
LP150X05
Liquid Crystal Display
Product Specification
1. General Description
The LP150X05 is a Color Active Matrix Liquid Crystal Display with an integral Cold Cathode Fluorescent
Lamp(CCFL) backlight system. The matrix employs a-Si Thin Film Transistor as the active element.
It is a transmissive type display operating in the normally white mode. This TFT-LCD has 15.0 inches
diagonally measured active display area with XGA resolution(768 vertical by 1024 horizontal pixel array)
Each pixel is divided into Red, Green and Blue sub-pixels or dots which are arranged in vertical stripes.
Gray scale or the brightness of the sub-pixel color is determined with a 6-bit gray scale signal for each dot,
thus, presenting a palette of more than 262,144 colors.
The LP150X05 has been designed to apply the interface method that enables low power, high speed,
low EMI.
The LP150X05 is intended to support applications where thin thickness, low power are critical factors
and graphic display are important. In combination with the vertical arrangement of the sub-pixels, the
LP150X05 characteristics provide an excellent flat display for office automation products such as
Notebook PC.
jGkGj
s}kzG
M
{G
j
i
yGkGj
juX
{m{Tsjk
OXWY[GG^]_P
wG
i
qX iGsGhN
ajGMGk awG
General Features
Active Screen Size 15.0 inches(38.1cm) diagonal
Outline Dimension 317.3(H) x 241.5(V) x 5.7(D) mm(Typ.)
Pixel Pitch 0.297 mm x 0.297 mm
Pixel Format 1024 horiz. By 768 vert. Pixels RGB strip arrangement
Color Depth 6-bit, 262,144 colors
Luminance, White 150 cd/m2(Typ.)
Power Consumption Total 4.03 Watt(Typ.)
Weight 540 g (typ.)
Display Operating Mode Transmissive mode, normally white
Surface Treatment Hard coating(3H) Anti-glare treatment of the front polarizer
Ver. 1.0 JUL 25. 2002 1/7
LP150X05
Liquid Crystal Display
Product Specification
2. Electrical Specifications
The LP150X05 requires two power inputs. One is employed to power the LCD electronics and to drive the
TFT array and liquid crystal. The second input which powers the CCFL, is typically generated by an
inverter. The inverter is an external unit to the LCD.
Table 1. ELECTRICAL CHARACTERISTICS
Values
Parameter Symbol Unit Notes
Min Typ Max
MODULE :
Power Supply Input Voltage VCC 3.0 3.3 3.6 Vdc
Power Supply Input Current ICC - 183 228 mA 1
Power Consumption Pc - 0.60 0.75 Watt 1
Differential Impedance Zm 90 100 110 ohm 2
LAMP :
Operating Voltage VBL 655 685 805 VRMS 4
Operating Current IBL 3.0 5.0 6.0 mARMS
Established Starting Voltage Vs 5
at 25