Text preview for : DVD Codes E-BOOK.pdf part of . Various DVD Codes E-BOOK . Various DVD Regeon Codes E Book DVD Codes E-BOOK.pdf
Back to : DVD Codes E-BOOK.pdf | Home
A-trend AD-L528
With the draw closed, and with no disc in it. Press 7,6 and select on the remote,
and this will take you into the firmware settings, use the arrows on the remote to
scroll down to the region setting and change to whatever region you require then
press enter. Then scroll to the bottom where it says 'next page' and press enter
then on the next page scroll to the macro vision settings and press enter twice or
until '0' is shown and the macro vision is disabled. Then press set-up to exit. If
you turn the machine off, the macrovision will have to be set to disabled again.
or
Take any disk out of player, press pause on remote control press 3, 1, 4, 1, 5, 9
on remote control and the word CODE will appear in the DVD player's window
press the key for the region e.g., 1 for USA. Press pause again
Turn player off then on again
or
Switch on DVD player, press 'stop' on the remote, press '1','9','9','9' then 'enter'
and the zone menu appears select 'all' to de-regionize the player
A-trend LE511
Switch on the DVD player and Press: STOP, 1, 9, 9, and 9. The hidden menu
appears.
Set the "Zone" field to ALL
Acoustic Solutions DVD421
Open disc tray, Press 'Set-up' on the remote and Then press 'Next, Prev, Next,
Prev.'
Enter region code set-up:
Ver 255 = Region free
Ver 1 = Region 1
Ver 2 = Region 2
Press left (<) or right (>) key
Press Down key twice
Ver 4001 = macrovision enable
Ver 4000 = macrovision disable
Press left (<) or right (>) key
Acoustic Solutions DVD421
Open disc tray, Press 'Set-up' on the remote and Then press 'Next, Prev, Next,
Prev.'
Enter region code set-up:
Ver 255 = Region free
Ver 1 = Region 1
Ver 2 = Region 2
Press left (<) or right (>) key
Press Down key twice
Ver 4001 = macrovision enable
Ver 4000 = macrovision disable
Press left (<) or right (>) key
Acoustic Solutions DVD551
Switch machine on with no disc in it and Press "Set-up" on remote. Then push
Press Next > Stop > Pause > Prev > Next. This will bring up Region ID, up arrow
to "bypass" for all regions. Press "Select/play" for confirmation.
Afreey ADV-2360
Turn on the ADV-2360 without a disc in and open the Player Tray. Press SETUP
on the remote to go to the set-up menu. Press in sequence the following buttons:
ZOOM, PREV, NEXT. Then on the top of the screen you will see "XX1XX". With the
arrows on the remote, press left or right to change until the desired region
number appears. After region is selected, press SETUP to go back to the main
screen.
Afreey LD-2060
Multiregion: type 38883 on remote.
Macrovision Hack: Enter SETUP with remote then enter 590419 to enter "loop
hole" menu. Cursor to macrovision & set to OFF.
Afreey PDV-2000
Code 1;
Turn on the PDV-2000 without a disc in. Press SETUP on the remote to go to the
set-up menu, press in sequence the following buttons: SUB-T, ZOOM, PREV,
NEXT. Then on the top of the screen you will see "XX1XX". With the arrows on the
remote, press left or right to change until the desired region number appears.
After region is selected, press SETUP to go back to the main screen.
Code 2;
To change the regions, use the remote control and Push the following sequence of
buttons: SETUP, +10, PREV, NEXT.
A screen will appear which will show you what region the DVD player is in. Use
the left and right arrows to select the region you want to play. When you have
selected the region press the SETUP button to exit. Power off the DVD player,
when you power on the DVD player it will select the new region. Please note that
you can select region 0 which is a bypass region, which will allow you to play any
region.
Aiwa XD-DV170
Plug the power into the unit but keep it turned off ("OFF" should be on display).
Press and hold "MENU" button on unit, while holding pressed that key, do the
same with "TOP MENU" (now you have two buttons pressed) and finally do so
with "OSD" (you have to follow the sequence keeping pressed all previous keys)
Once you have "MENU" "TOP MENU" and "OSD" buttons, hold them for at least 3
seconds and "FACTORY" should appears on display. Turn on the unit
In order to put it back to normal, use "F SKIP" instead of "MENU", "B SKIP"
instead of "TOP MENU" and "POWER" instead of "OSD". "All Clear" should appear
on display.
Aiwa XD-DV370
Code 1;
Press the Pause button on your remote control. Using your remote control enter
the code 3, 1, 4, 1, 5 and 9. Press the 0 button on your remote control for Region
free, 1 for Region 1 or 2 for Region 2. Press the Pause button on your remote
control. Power off your player and wait a few seconds. Power on your player
Code 2;
Power on the player with no disc inserted, and wait for the "No Disc" message on
screen. Using the remote Press PAUSE and then Press the numbers 314159 in
order. Press the number of the region you desire. Press PAUSE. Power off the
player for a few seconds and power back up and insert your DVD disc!
Aiwa XD-DV480
Code 1;
Power on player with no disc inserted and wait for "No Disc" message on screen.
Using the remote Press PAUSE and then Press the numbers 314159 in order.
Press the number of the region you desire. Press PAUSE. Power off the player
for a few seconds and power back up and insert your DVD disc!
Code 2;
Same as above, but put 3412292 as the code.
Code 3;
same as above, but put 8926 as the code.
Code 4;
Same as above, but put 342292 as the code.
Aiwa XD-DW1
Turn on player, Insert any disc. Open the lid, take out disc and close the lid.
Immediately press [Stop] and wait few seconds. Press 8,7,1,0 and then >> on
remote. The player should be region free now!
Aiwa XD-DW5
Code 1;
Turn on player, Insert any disc. Open the lid and take out the disc and close the
lid. Immediately press [Stop], wait few seconds. Press 8,7,X,0 (where x is the
region code, e.g.