Text preview for : Panel_LG_Display_LC320WXE-SBV2_1_[DS].pdf part of . Various Panel LG Display LC320WXE-SBV2 1 [DS] . Various LCD Panels Panel_LG_Display_LC320WXE-SBV2_1_[DS].pdf
Back to : Panel_LG_Display_LC320WXE | Home
Global LCD Panel Exchange Center www.panelook.com
LC320WXE
Product Specification
SPECIFICATION
FOR
APPROVAL
( ) Preliminary Specification
( ) Final Specification
Title 32.0" WXGA TFT LCD
BUYER SUPPLIER LG Display Co., Ltd.
MODEL *MODEL LC320WXE
SUFFIX SBV2
*When you obtain standard approval,
please use the above model name without suffix
SIGNATURE SIGNATURE
APPROVED BY APPROVED BY
DATE DATE
/ D.W. Lee / Team Leader
REVIEWED BY
/
PREPARED BY
/ D.E. Kim / Engineer
Please return 1 copy for your confirmation with TV Product Development Dept.
your signature and comments. LG Display Co., Ltd
Ver. 0.1 1 / 27
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
LC320WXE
Product Specification
CONTENTS
Number ITEM Page
COVER 1
CONTENTS 2
RECORD OF REVISIONS 3
1 GENERAL DESCRIPTION 4
2 ABSOLUTE MAXIMUM RATINGS 5
3 ELECTRICAL SPECIFICATIONS 6
3-1 ELECTRICAL CHARACTERISTICS 6
3-2 INTERFACE CONNECTIONS 8
3-3 SIGNAL TIMING SPECIFICATIONS 10
3-4 SIGNAL TIMING WAVEFORMS 12
3-5 COLOR DATA REFERENCE 13
3-6 POWER SEQUENCE 14
4 OPTICAL SPECIFICATIONS 16
5 MECHANICAL CHARACTERISTICS 20
6 RELIABILITY 23
7 INTERNATIONAL STANDARDS 24
7-1 SAFETY 24
7-2 EMC 24
8 PACKING 25
8-1 INFORMATION OF LCM LABEL 25
8-2 PACKING FORM 25
9 PRECAUTIONS 26
9-1 MOUNTING PRECAUTIONS 26
9-2 OPERATING PRECAUTIONS 26
9-3 ELECTROSTATIC DISCHARGE CONTROL 27
9-4 PRECAUTIONS FOR STRONG LIGHT EXPOSURE 27
9-5 STORAGE 27
9-6 HANDLING PRECAUTIONS FOR PROTECTION FILM 27
Ver. 0.1 2 / 27
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
LC320WXE
Product Specification
RECORD OF REVISIONS
Ver. 0.1 3 / 27
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
LC320WXE
Product Specification
1. General Description
The LC320WXE is a Color Active Matrix Liquid Crystal Display with an integral External Electrode Fluorescent
Lamp(EEFL) backlight system. The matrix employs a-Si Thin Film Transistor as the active element.
It is a transmissive type display operating in the normally black mode. It has a 31.51 inch diagonally measured
active d ispla y area with WXGA reso lution (768 ver tica l by 1366 ho r izontal pixel array).
Each pixel is divided into Red, Green and Blue sub-pixels or dots which are arranged in Horizontal stripes.
Gray scale or the luminance of the sub-pixel color is determined with a 8-bit gray scale signal for each dot,
thus presenting a palette of more than 16.7M(true) colors.
It has been designed to apply the 8-bit 1-port LVDS interface.
It is intended to support LCD TV, PCTV where high brightness, super wide viewing angle, high color gamut,
high color depth and fast response time are important.
EEPROM
SCL SDA
+12.0V
LVDS 1Port Timing Controller
TFT - LCD Panel
CN1 (1366 768 x RGB pixels)
(30pin)
LVDS Select #9 [LVDS Rx + Spread Spectrum [Gate In Panel]
integrated]
S1 S1366
Power Circuit RGB
Block Source Driver Circuit
High Input
CN2, 3Pin, 10 Lamps/@65 mA
High Input Back light Assembly (10EEFL)
CN3, 3Pin, 10 Lamps/@65 mA
General Features
Active Screen Size 31.51 inches(800.4mm) diagonal
Outline Dimension 760.0 mm(H) x 450.0 mm(V) x 36.0 mm(D) (Typ.)
Pixel Pitch 510.75 x 170.25 x RGB
Pixel Format 1366 horiz. by 768 vert. pixels RGB horizontal stripe arrangement
Color Depth 8bit, 16,7 M colors
Luminance, White 350 cd/m2 (Center 1 point) (Typ.)
Viewing Angle (CR>10) Viewing angle free ( R/L 178(Min.), U/D 178(Min.))
Power Consumption Total 73.5Watt (Typ.) (Logic=3.5 W, Back Light= 70W @ with Inverter)
Weight 4,500g(Typ.) (TBD)
Display Operating Mode Transmissive mode, normally black
Surface Treatment Hard coating(3H), anti-glare treatment of the front polarizer (Haze 10%)
Ver. 0.1 4 / 27
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
LC320WXE
Product Specification
2. Absolute Maximum Ratings
The following items are maximum values which, if exceeded, may cause faulty operation or damage to the
LCD module.
Table 1. ABSOLUTE MAXIMUM RATINGS
Value
Parameter Symbol Unit Remark
Min Max
Power Input
LCM VLCD -0.3 +14.0 VDC at 25 r 2 C
Voltage
B/L Input Operating Voltage
VOP 600 1300 V[ RMS] r
voltage (one side)
Operating Temperature TOP 0 +50 C
Storage Temperature TST -20 +60 C
Note 1,2
Operating Ambient Humidity HOP 10 90 %RH
Storage Humidity HST 10 90 %RH
Notes : 1. Temperature and relative humidity range are shown in the figure below.
Wet bulb temperature should be Max 39 C and no condensation of water.
2. Gravity mura can be guaranteed below 40 condition.
90%
60
60%
50 Storage
Humidity [(%)RH]
Wet Bulb
Temperature [ C]
40
40%
Operation
30
20
10
0
10%
-20 0 10 20 30 40 50 60 70 80
Dry Bulb Temperature [ C]
Ver. 0.1 5 / 27
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
LC320WXE
Product Specification
3. Electrical Specifications
3-1. Electrical Characteristics
It requires two power inputs. One is employed to power for the LCD circuit.
The other Is used for the EEFL backlight.
Table 2. ELECTRICAL CHARACTERISTICS (NOT FIXED)
Value
Parameter Symbol Unit Note
Min Typ Max
Circuit :
Power Input Voltage VLCD 10.8 12.0 13.2 VDC
- 290 380 mA 1
Power Input Current ILCD
- 400 520 mA 2
Power Consumption PLCD - 3.5 5.16 Watt 1
Rush current IRUSH - - 3.0 A 3
Notes : 1. The specified current and power consumption are under the VLCD=12.0V, 25 r 2 C, fV=60Hz
condition whereas mosaic pattern(8 x 6) is displayed and fV is the frame frequency.
2. The current is specified at maximum current pattern.
3. The duration of rush current is about 2ms and rising time of power input is 0.5ms (min.)
White : 255 Gray
Black : 0 Gray
Mosaic Pattern(8 x 6)
Ver. 0.1 6 / 27
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
LC320WXE
Product Specification
Table 3. ELECTRICAL CHARACTERISTICS for IPB & Lamp (NOT FIXED)
Values
Parameter Symbol Unit Notes
Min Typ Max
Backlight Assembly :
Operating Voltage
VBL TBD TBD TBD VRMS 1, 2
(one side, fBL=63KHz, IBL= 65mArms))
Operating Current (one side) IBL - 65 - mARMS 1
Established Starting 0 - - TBD
VS VRMS 1, 3
Voltage (one side) 25 - - TBD
Operating Frequency fBL 61 63 65 kHz 4
Striking Time S TIME - - 5 sec 3
Power Consumption PBL 70 Watt 6
Burst Dimming Duty PWM duty 20 100 % 9
Burst Dimming Frequency 1/T 98 - 182 Hz 9
Values
Parameter Symbol Unit Notes
Min Typ Max
Lamp : APPENDIX-V
Lamp Voltage (one side) VLAMP 690 TBD 1140 VRMS 2
Lamp Current (one side) ILAMP 3 6.5 8.5 mARMS
Discharge Stabilization Time TS - - 3 Min 5
Lamp Frequency f LAMP 40 63 80 KHz
Lamp Temperature TLAMP 130 C
Established Starting 0 VS 1080
VRMS 3
Voltage (one side) 25 VS 980
Life Time 50,000 Hrs 7
Notes : The design of the inverter must have specifications for the lamp in LCD Assembly.
The electrical characteristics of inverter are based on High-High Driving type.
The performance of the lamps in LCM, for example life time or brightness, is extremely influenced by
the characteristics of the DC-AC inverter. So, all the parameters of an inverter should be carefully
designed so as not to produce too much leakage current from high-voltage output of the inverter.
When you design or order the inverter, please make sure unwanted lighting caused by the mismatch
of the lamp and the inverter (no lighting, flicker, etc) has never been occurred. When you confirm it,
the LCD