Text preview for : Panel_AUO_T260XW04_V8_0_[DS].pdf part of . Various Panel AUO T260XW04 V8 0 [DS] . Various LCD Panels Panel_AUO_T260XW04_V8_0_[DS].pdf
Back to : Panel_AUO_T260XW04_V8_0_[ | Home
Model Name: T260XW04 V8
Issue Date : 2010/11/05
( ) Preliminary Specifications
() Final Specifications
Contents
No
CONTENTS
RECORD OF REVISIONS
1 GENERAL DESCRIPTION
2 ABSOLUTE MAXIMUM RATINGS
3 ELECTRICAL SPECIFICATION
3-1 ELECTRIACL CHARACTERISTICS
3-2 INTERFACE CONNECTIONS
3-3 SIGNAL TIMING SPECIFICATION
3-4 SIGNAL TIMING WAVEFORM
3-5 COLOR INPUT DATA REFERENCE
3-6 POWER SEQUENCE
3-7 BACKLIGHT SPECIFICATION
4 OPTICAL SPECIFICATION
5 MECHANICAL CHARACTERISTICS
6 RELIABILITY TEST ITEMS
7 INTERNATIONAL STANDARD
7-1 SAFETY
7-2 EMC
8 PACKING
8-1 DEFINITION OF LABEL
8-2 PACKING METHODS
8-3 PALLET AND SHIPMENT INFORMATION
9 PRECAUTION
9-1 MOUNTING PRECAUTIONS
9-2 OPERATING PRECAUTIONS
9-3 ELECTROSTATIC DISCHARGE CONTROL
9-4 PRECAUTIONS FOR STRONG LIGHT EXPOSURE
9-5 STORAGE
9-6 HANDLING PRECAUTIONS FOR PROTECT FILM
Record of Revision
Version Date Page Description
0.0 2010/09/27 First release
1. General Description
This specification applies to the 26.0 inch Color TFT-LCD Module T260XW04 V8 This LCD module has a TFT
active matrix type liquid crystal panel 1366x768 pixels, and diagonal size of 26.0 inch. This module supports
1366x768 mode. Each pixel is divided into Red, Green and Blue sub-pixels or dots which are arranged in vertical
stripes. Gray scale or the brightness of the sub-pixel color is determined with a 8-bit gray scale signal for each dot.
The T260XW04 V8has been designed to apply the 8-bit 1 channel LVDS interface method. It is intended to
support displays where high brightness, wide viewing angle, high color saturation, and high color depth are very
important.
* General Information
Items Specification Unit Note
Active Screen Size 26.00 inch
Display Area 575.769 (H) x 323.712(V) mm
Outline Dimension 626.0 (H) x 373.0 (V) x 54.8 (D) mm With T-balance board
Driver Element a-Si TFT active matrix
Display Colors 8 bit, 16.7M Colors
Number of Pixels 768 x1366 Pixel
Pixel Pitch 0.4215 (H) x 0.4215(W) mm
Pixel Arrangement RGB Horizontal stripe
Display Operation Mode Normally Black
Surface Treatment Anti-Glare, 3H Haze=2%
2. Absolute Maximum Ratings
The followings are maximum values which, if exceeded, may cause faulty operation or damage to the unit
Item Symbol Min Max Unit Conditions
Logic/LCD Drive Voltage Vcc -0.3 14 [Volt] Note 1
Input Voltage of Signal Vin -0.3 4 [Volt] Note 1
o
Operating Temperature TOP 0 +50 [ C] Note 2
Operating Humidity HOP 10 90 [%RH] Note 2
o
Storage Temperature TST -20 +60 [ C] Note 2
Storage Humidity HST 10 90 [%RH] Note 2
o
Panel Surface Temperature PST 65 [ C] Note 3
Note 1: Duration: 1sec.
Note 2 : Maximum Wet-Bulb should be 39 and No condensation.
The relative humidity must not exceed 90% non-condensing at temperatures of 40 or less. At temperatures
greater than 40 , the wet bulb temperature must not exceed 39 .
Note 3: Surface temperature is measured at 50 Dry condition
3. Electrical Specification
The T260XW04 V2 requires two power inputs. One is employed to power the LCD electronics and to drive the TFT
array and liquid crystal. The second input for BLU is to power inverter.
Electrical Characteristics
3.1.1: DC Characteristics
Value
Parameter Symbol Unit Note
Min. Typ. Max
LCD
Power Supply Input Voltage (for input power=12V) VDD 10.8 12 13.2 VDC
Power Supply Input Voltage (for input power=5V) VDD -- 0.22 0.34 VDC
Power Supply Input Current (Define to section:1.1) IDD -- 2.64 4.08 A 1
Inrush Current (Define to section:1.1) IRUSH -- -- 3 A 2
Input Differential Voltage VID 200 400 600 mVDC 3
LVDS Differential Input High Threshold Voltage VTH +100 -- +300 mVDC 3
Interface
Differential Input Low Threshold Voltage VTL -300 -- -100 mVDC 3
Input Common Mode Voltage VICM 1.1 1.25 1.4 VDC 3
VIH
CMOS Input High Threshold Voltage 2.7 -- 3.3 VDC 4
(High)
Interface VIL
Input Low Threshold Voltage 0 -- 0.6 VDC 4
(Low)
Backlight Power Consumption PBL - 55 - Watt
3.1.2: AC Characteristics
Value
Parameter Symbol Unit Note
Min. Typ. Max
Input Channel Pair Skew Margin
tSKEW (CP) -500 -- +500 ps 5
(only for TCON: 12403U1, 12405K01)
Receiver Clock : Spread Spectrum Fclk Fclk
Fclk_ss -- MHz 6
Modulation range -3% +3%
LVDS
Interface Receiver Clock : Spread Spectrum
Fss 30 -- 200 KHz 6
Modulation frequency
Receiver Data Input Margin
Fclk = 85 MHz tRMG -0.4 -- 0.4 ns 7
Fclk = 65 MHz -0.5 -- 0.5
T260XW04 V8 Product Specification
Rev. 1.0
Note :
1. Test Condition:
(1) VDD = 12.0V
(2) Fv = Type Timing, 60Hz, 120Hz or Other
(3) Fclk= Max freq.
(4) Temperature = 25
(5) Typ. Input current : White Pattern
Max. Input current: Heavy loading pattern defined by AUO
>> refer to "Section:3.3 Signal Timing Specification, Typical timing"
2. Measurement condition : Rising time = 400us
VDD
90%
10%
GND
400