Text preview for : Panel_CMO_M236H1-P08_1_[DS].pdf part of . Various Panel CMO M236H1-P08 1 [DS] . Various LCD Panels Panel_CMO_M236H1-P08_1_[DS].pdf
Back to : Panel_CMO_M236H1-P08_1_[D | Home
Global LCD Panel Exchange Center www.panelook.com
Issued Date: July 10, 2009
Model No.: M236H1-P08
Preliminary
TFT LCD Preliminary Specification
MODEL NO.: M236H1-P08
Customer :
Approved by :
Note :
1 / 23
Version 1.0
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
Issued Date: July 10, 2009
Model No.: M236H1-P08
Preliminary
- CONTENTS -
REVISION HISTORY ------------------------------------------------------- 3
1. GENERAL DESCRIPTION ------------------------------------------------------- 4
1.1 OVERVIEW
1.2 FEATURES
1.3 APPLICATION
1.4 GENERAL SPECIFICATIONS
1.5 MECHANICAL SPECIFICATIONS
2. ABSOLUTE MAXIMUM RATINGS ------------------------------------------------------- 5
2.1 ABSOLUTE RATINGS OF ENVIRONMENT (BASE ON CMO MODULE M236H1-L08)
2.2 ABSOLUTE RATINGS OF ENVIRONMENT (OPEN CELL)
2.3 ELECTRICAL ABSOLUTE RATINGS (OPEN CELL)
3. ELECTRICAL CHARACTERISTICS ------------------------------------------------------- 6
3.1 TFT LCD MODULE
3.2 Vcc POWER DIP CONDITION
4. BLOCK DIAGRAM ------------------------------------------------------- 8
4.1 TFT LCD MODULE
5. INPUT TERMINAL PIN ASSIGNMENT ------------------------------------------------------- 9
5.1 TFT LCD MODULE
5.2 LVDS DATA MAPPING TABLE
5.3 COLOR DATA INPUT ASSIGNMENT
6. INTERFACE TIMING ------------------------------------------------------- 11
6.1 INPUT SIGNAL TIMING SPECIFICATIONS
6.2 POWER ON/OFF SEQUENCE
7. OPTICAL CHARACTERISTICS ------------------------------------------------------- 15
7.1 TEST CONDITIONS
7.2 OPTICAL SPECIFICATIONS
7.3 FLICKER ADJUSTMENT
8. PACKAGING ------------------------------------------------------- 19
8.1 PACKING SPECIFICATIONS
8.2 PACKING METHOD
9. DEFINITION OF LABELS ------------------------------------------------------- 20
9.1 OPEN CELL LABEL
9.2 CARTON LABEL
10. RELIABILITY TEST ------------------------------------------------------- 21
11. PRECAUTIONS ------------------------------------------------------- 22
11.1 ASSEMBLY AND HANDLING PRECAUTIONS
11.2 SAFETY PRECAUTIONS
11.3 OTHER
12. MECHANICAL DRAWING ------------------------------------------------------- 22
2 / 23
Version 1.0
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
Issued Date: July 10, 2009
Model No.: M236H1-P08
Preliminary
REVISION HISTORY
Version Date Section Description
Ver. 1.0 July 10, '09 - M236H1-P08 Preliminary Specification was first issued.
3 / 23
Version 1.0
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
Issued Date: July 10, 2009
Model No.: M236H1-P08
Preliminary
1. GENERAL DESCRIPTION
1.1 OVERVIEW
The M236H1-P08 is a 23.6-inch wide TFT LCD open cell with driver ICs and a 30-pins-2ch-LVDS
circuit board. The product supports 1920 x 1080 Full HD mode and can display up to 16.7M colors. The
backlight unit is not built in.
1.2 FEATURES
- Super wide viewing angle
- High contrast ratio
- Fast response time
- High color saturation
- Full HDTV (1920 x 1080 pixels) resolution
- DE (Data Enable) only mode
- LVDS (Low Voltage Differential Signaling) interface
- RoHS Compliance
1.3 APPLICATION
- TFT LCD Monitor
1.4 GENERAL SPECIFICATIONS
Item Specification Unit Note
Diagonal Size 23.547 inch
Active Area 521.28 (H) x 293.22 (V) mm (1)
Driver Element a-Si TFT active matrix - -
Pixel Number 1920 x R.G.B. x 1080 pixel -
Pixel Pitch 0.2715 (H) x 0.2715 (V) mm -
Pixel Arrangement RGB vertical stripe - -
Display Colors 16.7M color -
Transmissive Mode Normally White - -
Surface Treatment Hard coating (3H), Anti-glare (Haze 25%) - -
Power Consumption 5 Watt (3)
1.5 MECHANICAL SPECIFICATIONS
Item Min. Typ. Max. Unit Note
Weight - - 710 g -
I/F connector mounting The mounting inclination of the connector makes
(2)
position the screen center within