Text preview for : Panel_COC_PM50H2000_0_[DS].pdf part of . Various Panel COC PM50H2000 0 [DS] . Various LCD Panels Panel_COC_PM50H2000_0_[DS].pdf
Back to : Panel_COC_PM50H2000_0_[DS | Home
COC Display Devices Co., Ltd. TENTATIVE No. :
Product Specification of 50HD-PDP Module
CUSTOMER
APPROVAL
SPECIFICATION
( ) Preliminary Specification
( ) Final Specification
Title PM50H2000 (50HD MODULE )
COC Display Devices
Buyer Name Supplier
Co., Ltd.
Model Name PM50H2000 Model Name PM50H2000
PART No. PART No.
Signature / Date Signature / Date
Approved by Approved by
Please return 1 copy for our confirmation
COC Display Devices Co., Ltd.
with your signature
Rev. No. : 0.0 2009. 12. 18. 1/37
COC Display Devices Co., Ltd. TENTATIVE No. :
Product Specification of 50HD-PDP Module
Record of Revisions
Revision Effective
Comments
No. Date
0.0 2009. 12. 18 - Establishment
Rev. No. : 0.0 2009. 12. 18. 2/37
COC Display Devices Co., Ltd. TENTATIVE No. :
Product Specification of 50HD-PDP Module
CONTENTS
0. WARNINGS AND CAUTIONS 4
Warning 4
Caution 5
1. GENERAL DESCRIPTION 9
Description 9
Features 9
Applications 9
Electrical Interface of Plasma Display 9
General Specifications 10
2. ELECTRICAL SPECIFICATIONS 11
Input Power Specifications 11
Power Sequence 12
LVDS Connection 13
Input Signal Timing (Non-interlaced Mode) 17
I2C Timing Specification & Register Description 19
3. ELECTRO OPTICAL SPECIFICATIONS 25
Electro Optical characteristic Specifications (60Hz) 25
Electro Optical characteristic Specifications (50HZ) 25
4. MECHANICAL AND ENVIRONMENTAL SPECIFICATIONS 26
Mechanical Characteristic Specifications 26
Vibration and Drop Specifications 26
Environmental Conditions 26
5. IMAGE STICKING CHARACTERISTICS 27
6. OUTLINE DRAWING 28
Front View 28
Rear View 29
7. CONNECTORS AND CONNECTIONS 30
8. LABEL 31
9. PACKING 34
* APPENDIX 35
Cell Defect Specifications 35
Scratch and Dent Specification 36
Sound Pressure Level Specification 36
Rev. No. : 0.0 2009. 12. 18. 3/37
COC Display Devices Co., Ltd. TENTATIVE No. :
Product Specification of 50HD-PDP Module
0. Warnings and Cautions
WARNING indicates hazards that may lead to death or injury if ignored.
CAUTION indicates hazards that may lead to injury or damage to property if ignored.
! WARNING
1) This product uses a high voltage (450 V max.). Do not touch the circuitry of this product with your hands
when power is supplied to the product or immediately after turning off the power. Be sure to confirm that the
voltage is dropped to a sufficiently low level.
2) Do not supply a voltage higher than that specified to this product. This may damage the product and may
cause a fire.
3) Do not use this product in locations where the humidity is extremely high, where it may be splashed with
water, or where flammable materials surround it. Do not install or use the product in a location that does no
satisfy the specified environmental conditions. This may damage the product and may cause a fire.
4) If a foreign substance (such as water, metal, or liquid) gets inside the product, immediately turn off the power.
Continuing to use the products it may cause fire or electric shock.
5) If the product emits smoke, an abnormal smell, or makes an abnormal sound, immediately turn off the power.
If noting is displayed or if the display goes out during use, immediately turn off the power. Continuing to use
the product as it is may cause fire or electric shock.
6) Do not disconnect or connect the connector while power to the product is on. It takes some time for the
voltage to drop to a sufficiently low level after the power has been turned off. Confirm that the voltage has
dropped to a safe level before disconnecting or connecting the connector. Otherwise, this may cause fire,
electric shock, or malfunction.
7) Do not pull out or insert the power cable from/to an outlet with wet hands. It may cause electric shock.
8) Do not damage or modify the power cable. It may cause fire or electric shock.
9) If the power cable is damaged, or if the connector is loose, do not use the product; otherwise, this can lead to
fire or electric shock.
10) If the power connector or the connector of the power cable becomes dirty or dusty, wipe it with a dry cloth.
Otherwise, this can lead to fire.
Rev. No. : 0.0 2009. 12. 18. 4/37
COC Display Devices Co., Ltd. TENTATIVE No. :
Product Specification of 50HD-PDP Module
! CAUTION
General
1) Do not place this product in a location that is subject to heavy vibration, or on an unstable surface such as an
inclined surface. The product may fall off or fall over, causing injuries.
2) When moving the product, be sure to turn off the power and disconnect all the cables. While moving the
product, watch your step. The product may be dropped or fall, leading to injuries of electric shock.
3) Before disconnecting cable from the product, be sure to turn off the power. Be sure to hold the connector when
disconnecting cables. Pulling a cable with excessive force may cause the core of the cable to be exposed or
break the cable, and this can lead to fire or electric shock.
4) This product should be moved by two or more persons. If one person attempts to carry this product alone,
he/she may be injured.
5) This product contains glass. The glass may break, causing injuries, if shock, vibration, heat, or distortion is
applied to the product.
6) The temperature of the glass surface of the display may rise to 80