Text preview for : Panel_CHILIN_TX6A12_0_[DS].pdf part of . Various Panel CHILIN TX6A12 0 [DS] . Various LCD Panels Panel_CHILIN_TX6A12_0_[DS].pdf
Back to : Panel_CHILIN_TX6A12_0_[DS | Home
Global LCD Panel Exchange Center www.panelook.com
Tentative Specifications (Preliminary)
Doc. No1.
Customer
Customer Type
CLT Type TX6A11/TX6A12 42'' Full HD_60Hz
Date 2010-09-02
Revision number Ver. 1
Code 10190163-A0/10190168-A0
Open Cell Type CMI V420H2-P01
Customer Approved
CHILIN TECHNOLOGY
QRA Manufacture Approved Checked Design
Rev.: 01 Page: 1 of 29 Date: 2010/09/02
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
Tentative Specifications (Preliminary)
Doc. No2.
Revision History
Version Date Page Section Description
0 2010/08/31 All All
1 2010/9/2 18 1.4.2.2 Modify Input Voltage Min. & Max Value
Rev.: 01 Page: 2 of 29 Date: 2010/09/02
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
Tentative Specifications (Preliminary)
Doc. No3.
jvu{lu{zGvmG~GslkGtvk|slGG[ IGsjt
jvu{lu{zGvmG~GslkGtvk|slGG[YIGsjt
G
1.0 APPLIED TYPE ............................................ PAGE 4
1.1 GENERAL SPECIFICATIONS
1.2 MECHANICAL SPECIFICATIONS
1.3 ABSOLUTE MAXIMUM RATING
1.4 LCM MODULE INTERFACE DEFINITION
1.4.1 CELL MODULE INFORMATION
1.4.1.1 REFERENCE TO CMI V420H2-P01 SPECIFICATION
1.4.1.2 LVDS INPUT CONNECTOR PIN ASSIGNMENT
1.4.1.3 CONNECTOR EMECHANICAL SPECIFICATIONS
1.4.1.4 LVDS INTERFACE
1.4.1.4 ELECTRICAL CHARACTERISTICS FOR LVDS RECEIVER
1.4.1.6 COLOR DATA INPUT ASSIGNMENT
1.4.1.7 INPUT SIGNAL TIMING SPECIFICATIONS
1.4.1.8 CELL ON/OFF SEQUENCE
1.4.2 LED BACKLIGHT MODULE
1.4.2.1 LED BACKLIGHT LIGHT ON CONNECTOR PIN DEFINITION AND SCHEMATIC
1.4.2.2 LED BACKLIGHT LED RATING SPECIFICATION
1.4.3 STATIC ELECTRICITY PROTECTION REQUIREMENT FOR LED
1.5 ABSOLUTE MAXIMUM RATING (ELECTRICAL)
2.0 OPTICAL SPECIFICATIONS .......................................... PAGE 20
3.0 RELIABILITY TEST ITEM .......................................... PAGE 23
4.0 PACKING .......................................... PAGE 24
4.1 PACKING SPECIFICATIONS
4.2 PACKING METHOD
4.3 PACKAGING LABEL
5.0 PRECAUTIONS .......................................... PAGE 26
5.1 MOUNTING PRECAUTIONS
5.2 OPERATING PRECAUTONS
5.3 ELECTROSTATIC DISCHARGE CONTROL
5.4 PRECAUTIONS FOR STRONG LIGHT EXPOSURE
5.5 STORAGE
5.6 HANDLING PRECRCAUTIONS FOR PROTECTION FILM
6.0 LOT NO. GENERATION .......................................... PAGE 27
7.0 SALES REGION .......................................... PAGE 27
8.0 MECHANICAL CHARACTERISTICS .......................................... PAGE 28
Rev.: 01 Page: 3 of 29 Date: 2010/09/02
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
Tentative Specifications (Preliminary)
Doc. No4.
1.0 APPLIED TYPE
This model adopts : CMI V420H2-P01 (OPEN CELL .
Therefore, please refer to specifications of 42" Full HD TFT-LCD module for a drive method and
an electrical characteristic of cell.
1.1 GENERAL SPECIFICATIONS
Item Specification Unit Note
Active Area 930.24(H) x 523.26 (V) (42" diagonal) mm
Bezel Opening Area 937.2(H) x 530.2(V) mm
Pixel Number 1920 x R.G.B. x 1080 pixel
Sub-Pixel Pitch 0.1615(H) x 0.4845(V) mm
Pixel Arrangement RGB vertical stripe -
Display Colors 16.7M color
Display Operation Mode Normally Black -
Surface Treatment Anti Glare + 3H -
1.2 MECHANICAL SPECIFICATIONS
Item Typ. Unit Note
Horizontal(H) 973.2 mm
Module Size Vertical(V) 566.2 mm
Depth(D) 19.2 mm To Frame Rear
Weight 8 Kg
1.3 ABSOLUTE MAXIMUM RATING
Value
Item Symbol Unit Note
Min. Max.
Storage Temperature TST -20 +60 (1)
Operating Ambient Temperature TOP 0 50 (1), (2)
Shock (Non-Operating) SNOP - 50 G (3), (5)
Vibration (Non-Operating) VNOP - 1.0 G (4), (5)
Note (1) Temperature and relative humidity range is shown in the figure below.
(a) 90 %RH Max. (Ta 40