Text preview for : Eurocap Full.pdf part of Eurocap Eurocap Full . Electronic Components Datasheets Passive components capacitors Eurocap Eurocap Full.pdf
Back to : Eurocap Full.pdf | Home
Table of Contents
Item Page
Electrolytic Capacitor Selection Chart 2
Electrolytic Capacitor Data Sheets 3
Lead Cutting and Forming 39
Taping and Packaging Specifications 40
Environmental Properties 43
Eurocap is a supplier of Selected Quality Electronic Components.
The company was established in 1988, to supply Aluminium Electrolytic Capacitors to OEM manufacturers.
A quality product manufactured to the Japanese Industrial Standard C5141, supplied at competitive prices
to compete on equal terms against the larger electrolytic capacitors manufacturers based in the Far East.
Today the Eurocap Brand is synonymous with established quality and personal service.
Our policy is to work closely with OEMs to provide tailored packages by understanding their requirements
and needs, to provide a service that meets their engineering, purchasing, stocking and pricing criteria.
Our Electrolytic Capacitor products are manufactured by Far Eastern owned factories.
We believe it is to our credit that we have continued to source from the same suppliers since our inception,
who have a good understanding of our customers needs and provide us with consistent quality
at the very best price.
The services offered by Eurocap and our Far Eastern principals include :
~ CONSISTENT QUALITY WITH COMPETITIVE PRICING.
~ ON TIME DELIVERIES WITH LOCAL STOCKING FACILITIES.
~ TECHNICAL BACKUP WITH TAILORED ENGINEERING SOLUTIONS.
We also supply a broad spectrum of other components which include:
Non-electrolytic Capacitors, Resistors, Varistors and Ferrites.
Eurocap International Limited.
138, High Street, Cheshunt, Herts, EN8 0AP England
Catalogue Revised June 2002
Eurocap International Limited.
Tel. +44 (0)1992 625407 E-Mail: [email protected]
Fax +44 (0)1992 625420 Website: www.eurocap-int.com/eurocap Pg.1 of 43
Electrolytic Capacitor Selection Chart
Lead Temperature Range Voltage Capacitance
Series Characteristics Page
Type Degrees C Range (V) Range (uF)
GPP Snap-In Snap-In Terminal -40 (-25) ~ +85 10 ~ 450 47 ~ 33000 3
GMP Snap-In Snap-In Terminal -40 (-25) ~ +105 16 ~ 450 68 ~ 33000 8
GPS Radial Standard Use -40 (-25) ~ +85 6.3 ~ 450 0.1 ~ 22000 13
Wide Temperature
GMS Radial
Range
-55, -40, -25 ~ +105 6.3 ~ 450 0.1 ~ 22000 16
Low ESR, High Ripple
FMEX Radial
Current
-55 ~ +105 6.3 ~ 63 0.47 ~ 15000 19
GP7 Radial 7mm L Standard Use -40 ~ +85 6.3 ~ 50 0.1 ~ 220 23
GP5 Radial 5mm L Standard Use -40 ~ +85 4 ~ 50 0.1 ~ 220 25
GPL Radial Low Leakage Current -40 ~ +85 10 ~ 50 0.1 ~ 1000 27
GPN Radial Bi-Polar -40 ~ +85 6.3 ~ 100 0.1 ~ 6800 29
GPST Axial Standard Use -40 (-25) ~ +85 6.3 ~ 450 0.47 ~ 22000 31
GMST Axial Wide temperature range -40 ~ +105 6.3 ~ 100 0.47 ~ 6800 34
MXM Chip Surface Mount -40 ~ +85 4 ~ 50 0.1 ~ 820 36
MTM Chip Surface Mount -40 ~ +105 4 ~ 50 0.1 ~ 470 36
Eurocap International Limited.
Tel. +44 (0)1992 625407 E-Mail: [email protected]
Fax +44 (0)1992 625420 Website: www.eurocap-int.com/eurocap Pg. 2 of 43
GPP Series
Features
* Small low profile
* 10mm terminal spacing for direct PCB mounting
* Aluminium case with explosion proof vent
* 2000 Hour lifetime
Item Performance Characteristics
Operating Temperature Range -40 to +85 deg C -25 to +85 deg C
Working Voltage Range 10 to 100 Volts D.C. 160 to 450 Volts D.C.
Nominal Capacitance Range 470 to 68000 uF 47 to 2700 uF
Capacitance Tolerance +/- 20 % ( 120 Hz), 20 deg C
Leakage Current (+20deg C) I <=0.02 CV after 5 Minutes
Less than the value below:
WVDC 10~16 25~35 50~63 80~100 160~250 350~450
uF
Dissipation Factor % 47~390 15 20
(120 Hz, +20 deg C) 470~3900 25 20 20 20 15 20
4700~8200 35 30 30 25
10000~22000 40 35 30
27000~47000 45 40 35
56000~68000 50 45
Impedence Ratio at 120 Hz
Stability at Low Temperature -25 to +20 deg C : 3 max
-40 to +20 deg C : 12 max
Test conditions
Duration time: 2000 Hrs
Ambient temperature: +85 deg C
Load Life Applied voltage: Rated working voltage
Ripple Current: Maximum rated ripple current.
After testing--Measure at 20 deg C.
Capacitance change: <= +/- 20% of initial measured value
Dissipation factor: <= 200% of initial specified value
Leakage current: <= The initial specified value
Test Conditions
Duration time: 500 Hrs
Ambient temperature: +85 deg C
Applied voltage: None
Shelf Life
After testing--Measure at 20 deg C.
Same limits as for load life.
Pre-treatment: The measurements shall be conducted after application
of the Working D.C. voltage for 30 minutes.
Marking White print on black sleeve
Physical Dimensions and Mounting Details
The capacitors can also be supplied with an optional 4mm (+/-1mm) long terminal.
Mounting holes TERMINALS
in P.C.B.
Safety Vent
Eurocap International Limited.
Tel. +44 (0)1992 625407. E-Mail: [email protected]
Fax +44 (0)1992 625420. Website: www.eurocap-int.com/eurocap GPP Pg. 3 of 43
GPP Series
Ir (A) specified at 85