Text preview for : Panel_AUO_M215HTN01-3_CELL_0_[DS].pdf part of . Various Panel AUO M215HTN01-3 CELL 0 [DS] . Various LCD Panels Panel_AUO_M215HTN01-3_CELL_0_[DS].pdf
Back to : Panel_AUO_M215HTN01-3_CEL | Home
Product Specification M215HTN01.3
AU OPTRONICS CORPORATION
() Preliminary Specification
(V) Final Specification
Module 21.5" Color TFT-LCD
Model Name M215HTN01.3 open cell
Customer Date Approved by Date
Howard Lee 2012/10/22
Approved by Prepared by
Louis Jung 2012/ 10/22
Note: This Specification is subject to
AU Optronics corporation
change without notice.
document version 1.0 1
Product Specification M215HTN01.3
AU OPTRONICS CORPORATION
Contents
1.0 Handling Precautions.............................................................6
2.0 General Description ...............................................................8
2.1 Display Characteristics ................................................................................................................... 8
2.2 Optical Characteristics.................................................................................................................... 8
3.0 Functional Block Diagram ......................................................8
4.0 Absolute Maximum Ratings....................................................8
4.1 TFT LCD Module ............................................................................................................................... 8
4.2 Absolute Ratings of Environment ....................................................................................................... 8
5.0 Electrical characteristics ........................................................8
5.1 TFT LCD Module ............................................................................................................................. 8
5.1.1 Power Specification ......................................................................................................................... 8
5.1.2 Signal Electrical Characteristics ................................................................................................ 8
6.0 Signal Characteristic ..............................................................8
6.1 Pixel Format Definition.................................................................................................................... 8
6.2 The input data format...................................................................................................................... 8
6.3 Signal Description............................................................................................................................ 8
6.4 Timing Characteristics ........................................................................................................................ 8
6.5 Timing diagram................................................................................................................................. 8
6.6 Power ON/OFF Sequence ............................................................................................................. 8
7.0 Connector & Pin Assignment..................................................8
7.1 TFT LCD Module ............................................................................................................................. 8
7.1.1 Pin Assignment ......................................................................................................... 8
8.0 Reliability Test .......................................................................8
9.0 Mechanical Characteristics.....................................................8
document version 1.0 2
Product Specification M215HTN01.3
AU OPTRONICS CORPORATION
Record of Revision
Version and Date Page Old description New Description Remark
0.1 2012/7/3 All First Edition for Customer -
1.0 2012/10/22 all Final spec Version 1.0
document version 1.0 3
Product Specification M215HTN01.3
AU OPTRONICS CORPORATION
1.0 Handling Precautions
1) Since front polarizer is easily damaged, pay attention not to scratch it.
2) Wipe off water drop immediately. Long contact with water may cause discoloration or spots.
3) When the cell surface is soiled, wipe it with absorbent cotton or other soft cloth.
4) Since the cell is made of glass, it may break or crack if dropped or bumped on hard surface.
5) Since CMOS LSI is used in this module, take care of static electricity and insure human earth
when handling.
6) Do not press or pat the panel surface by fingers, hand or tooling.
7) Please handle TFT cell with care. The FPCs can only sustain for quite limited stress.
8) The cell package tray is packed in clean room. Please do pack & unpack it in clean room.
9) At the insertion or removal of the Signal Interface Connector, be sure not to rotate nor tilt the
Interface Connector of the TFT cell.
10) Pls avoid touching COF position while you are doing mechanical design.
11) When storing modules as spares for a long time, the following precaution is necessary:
Store them in a dark place. Do not expose the module to sunlight or fluorescent light. Keep
the temperature between 5 and 35 at normal humidity.
document version 1.0 4
Product Specification M215HTN01.3
AU OPTRONICS CORPORATION
2.0 General Description
This specification applies to the 21.5 inch-wide Color a-Si TFT-LCD Module M215HTN01.3
The display supports the Full HD - 1920(H) x 1080(V) screen format and 16.7M colors (RGB 6-bits
+ Hi-FRC data). All input signals are 2-channel LVDS interface and this module doesn't contain
an inverter board for backlight.
2.1 Display Characteristics
The following items are characteristics summary on the table under 25 condition:
ITEMS Unit SPECIFICATIONS
Screen Diagonal [mm] 546.86(21.53")
Active Area [mm] 476.64 (H) x 268.11 (V)
Pixels H x V 1920(x3) x 1080
Pixel Pitch [um] 248.25 (per one triad)