Text preview for : Panel_AUO_B156HAN01-2_1_[DS].pdf part of . Various Panel AUO B156HAN01-2 1 [DS] . Various LCD Panels Panel_AUO_B156HAN01-2_1_[DS].pdf
Back to : Panel_AUO_B156HAN01-2_1_[ | Home
Product Specification
AU OPTRONICS CORPORATION
( ) Preliminary Specifications
( ) Final Specifications
Module 15.6"FHD 16:9 Color TFT-LCD with LED Backlight design
Model Name B156HAN01.2 (H/W: 1A)
Note ( ) LED Backlight with driving circuit design
Customer Date Approved by Date
Buffy Chen 12/
12 / 2 6 /2012
Checked &
Date Prepared by Date
Approved by
Tina GT Lin 12/25/2012
Note: This Specification is subject to DMPBU Marketing Division
change without notice. AU Optronics corporation
B156HAN01.2 Document Version : 1.0 1 of 31
Product Specification
AU OPTRONICS CORPORATION
Contents
1. Handling Precautions................................................................ 4
2. General Description ................................................................. 5
2.1 General Specification .......................................................................................................... 5
2.2 Optical Characteristics ........................................................................................................ 6
3. Functional Block Diagram........................................................ 11
4. Absolute Maximum Ratings...................................................... 12
4.1 Absolute Ratings of TFT LCD Module.............................................................................. 12
4.2 Absolute Ratings of Environment .................................................................................... 12
5. Electrical Characteristics ......................................................... 13
5.1 TFT LCD Module.................................................................................................................... 13
5.2 Backlight Unit ........................................................................................................................ 16
6. Signal Interface Characteristic ................................................. 17
6.1 Pixel Format Image ............................................................................................................. 17
6.2 Integration Interface Requirement ................................................................................ 18
6.3 Interface Timing ................................................................................................................... 20
6.4 Power On Sequence .......................................................................................................... 20
7. Panel Reliability Test ............................................................... 24
7.1 Vibration Test......................................................................................................................... 24
7.2 Shock Test .............................................................................................................................. 24
7.3 Reliability Test ........................................................................................................................ 24
8. Mechanical Characteristics ..................................................... 25
8.1 LCM Outline Dimension ..................................................................................................... 25
9. Shipping and Package ........................................................... 27
9.1 Shipping Label Format ....................................................................................................... 27
9.2 Carton Package .................................................................................................................. 28
9.3 Shipping Package of Palletizing Sequence................................................................. 28
10. Appendix: EDID Description.................................................... 29
B156HAN01.2 Document Version : 1.0 2 of 31
Product Specification
AU OPTRONICS CORPORATION
Record of Revision
Version and Date Page Old description New Description Remark
0.1 2012/09/05 All First Edition for Customer
1.0 2012/12/25 All Final Edition for Customer
B156HAN01.2 Document Version : 1.0 3 of 31
Product Specification
AU OPTRONICS CORPORATION
1. Handling Precautions
1) Since front polarizer is easily damaged, pay attention not to scratch it.
2) Be sure to turn off power supply when inserting or disconnecting from input
connector.
3) Wipe off water drop immediately. Long contact with water may cause discoloration
or spots.
4) When the panel surface is soiled, wipe it with absorbent cotton or other soft cloth.
5) Since the panel is made of glass, it may break or crack if dropped or bumped on
hard surface.
6) Since CMOS LSI is used in this module, take care of static electricity and insure
human earth when handling.
7) Do not open nor modify the Module Assembly.
8) Do not press the reflector sheet at the back of the module to any directions.
9) At the insertion or removal of the Signal Interface Connector, be sure not to rotate
nor tilt the Interface Connector of the TFT Module.
11)After installation of the TFT Module into an enclosure (Notebook PC Bezel, for
example), do not twist nor bend the TFT Module even momentary. At designing the
enclosure, it should be taken into consideration that no bending/twisting forces are
applied to the TFT Module from outside. Otherwise the TFT Module may be
damaged.
12) Small amount of materials having no flammability grade is used in the LCD module.
The LCD module should be supplied by power complied with requirements of Limited
Power Source (IEC60950 or UL1950), or be applied exemption.
13) Disconnecting power supply before handling LCD modules, it can prevent electric
shock, DO NOT TOUCH the electrode parts, cables, connectors and LED circuit part
of TFT module that a LED light bar build in as a light source of back light unit. It can
prevent electrostatic breakdown.
B156HAN01.2 Document Version : 1.0 4 of 31
Product Specification
AU OPTRONICS CORPORATION
2. General Description
B156HAN01.2 is a Color Active Matrix Liquid Crystal Display composed of a TFT LCD
panel, a driver circuit, and LED backlight system. The screen format is intended to
support the 16:9 FHD, 1920(H) x1080(V) screen and 262k colors (RGB 6-bits data driver)
with LED backlight driving circuit. All input signals are eDP interface compatible.
B156HAN01.2 is designed for a display unit of notebook style personal computer and
industrial machine.
2.1 General Specification
The following items are characteristics summary on the table at 25 condition:
Items Unit Specifications
Screen Diagonal [mm] 394.9
Active Area [mm] 344.16 x 193.59
Pixels H x V 1920 x 3(RGB) x 1080
Pixel Pitch [mm] 0.17925 x 0.17925
Pixel Format R.G.B. Vertical Stripe
Display Mode Normally Black
White Luminance (ILED = 20mA) 300 typ. (5 points average)
[cd/m2]
(Note: ILED is LED current) 255 min. (5 points average )
Luminance Uniformity 1.25 max. (5 points)
Contrast Ratio 700 typ
Response Time [ms] 25 typ
Nominal Input Voltage VDD [Volt] +3.3 typ.
Power Consumption [Watt] 5.6max. (Include Logic and Blu power)
Weight [Grams] 380 max.
[mm] Min. Typ. Max.
Physical Size Length 359.0 359.5 360.0
Include bracket Width 223.3 223.8 224.3
Thickness --- --- 3.2
Electrical Interface 2 lane eDP
Glass Thickness [mm] 0.3
Surface Treatment Anti-Glare
Support Color 262K colors ( RGB 6-bit )
Temperature Range
Operating [oC] 0 to +50
Storage (Non-Operating) [oC] -20 to +60
RoHS Compliance RoHS Compliance
Note: Contrast ratio measured in the center of screen
B156HAN01.2 Document Version : 1.0 5 of 31
Product Specification
AU OPTRONICS CORPORATION
2.2 Optical Characteristics
The optical characteristics are measured under stable conditions at 25 (Room Temperature) :
Item Symbol Conditions Min. Typ. Max. Unit Note
White Luminance
5 points average 255 300 --- cd/m2 1, 4, 5.
ILED=20mA
R Horizontal (Right) 80 85 ---
L CR = 10 (Left)
80 85 --- degre
Viewing Angle 4, 9
H Vertical (Upper) 80 85 --- e
L CR = 10 (Lower)
80 85 ---
Luminance Uniformity 5P 5 Points --- --- 1.25 1, 3, 4
Luminance Uniformity 13P 13 Points --- --- 1.60 2, 3, 4
Contrast Ratio CR 700 - 4, 6
Cross talk % --- --- 4 4, 7
Response Time TRT Rising + Falling --- 25 --- msec 4, 8
Rx 0.61 0.64 0.67
Red
Ry 0.30 0.33 0.36
Gx 0.29 0.32 0.35
Green
Color / Gy 0.57 0.60 0.63
Chromaticity
Coordinates Bx CIE 1931 0.12 0.15 0.18 4
Blue
By 0.03 0.06 0.09
Wx 0.283 0.313 0.343
White
Wy 0.299 0.329 0.359
NTSC % - 72 -
Note: Contrast ratio measured in the center of screen
B156HAN01.2 Document Version : 1.0 6 of 31
Product Specification
AU OPTRONICS CORPORATION
Note 1: 5 points position (Ref: Active area)
W
W /4 W /4 W /4 W /4
H /4
1 2
H /4
H 3
H /4
4 5
H /4
Note 2: 13 points position (Ref: Active area)
W
W /4 W /4 W /4 W /4
10 10
10
1 2 3
H /4
4 5
H /4
H 6 7 8
H /4
9 10
H /4 11 12 13
10
Note 3: The luminance uniformity of 5 or13 points is defined by dividing the maximum luminance values by
the minimum test point luminance
Maximum Brightness of five points
W5 =
Minimum Brightness of five points
Maximum Brightness of thirteen points
W13 =
Minimum Brightness of thirteen points
B156HAN01.2 Document Version : 1.0 7 of 31
Product Specification
AU OPTRONICS CORPORATION
Note 4: Measurement method
The LCD module should be stabilized at given temperature for 30 minutes to avoid abrupt temperature
change during measuring. In order to stabilize the luminance, the measurement should be executed after
lighting Backlight for 30 minutes in a stable, windless and dark room, and it should be measured in the
center of screen.
Photo detector
Field=2
50 cm
LCD Panel TFT-LCD Module
Center of the screen
Note 5 Definition of Average Luminance of White (YL):
Measure the luminance of gray level 63 at 5 points YL = [L (1)+ L (2)+ L (3)+ L (4)+ L (5)] / 5
L (x) is corresponding to the luminance of the point X at Figure in Note (1).
Note 6 Definition of contrast ratio:
Contrast ratio is calculated with the following formula.
Brightness on the "White" state
Contrast ratio (CR) =
Brightness on the "Black" state
Note 7 Definition of Cross Talk (CT)
CT = | YB