Text preview for : Panel_CHILIN_TXW011_1_[DS].pdf part of . Various Panel CHILIN TXW011 1 [DS] . Various LCD Panels Panel_CHILIN_TXW011_1_[DS].pdf
Back to : Panel_CHILIN_TXW011_1_[DS | Home
Specifications (Preliminary)
Doc. No1.
Customer
Customer Type
CLT Type TXW011/TXW012 31.5'' HD_60Hz
Date 2010-09-07
Revision number Ver. 01
Code 10190165-A0/10190170-A0
Open Cell Type CMI V315B6-P01
Customer Approved
TINGYAO TECHNOLOGY
QRA Manufacture Approved Checked Design
Rev.: 01 Page: 1 of 30 Date: 2010/09/7
Specifications (Preliminary)
Doc. No2.
Revision History
Version Date Page Section Description
00 2010/08/31 All All
01 2010/09/07 26,27 - Modify Description
Rev.: 01 Page: 2 of 30 Date: 2010/09/7
Specifications (Preliminary)
Doc. No3.
CONTENTS OF WHITE LED MODULE for 31.5" LCM
1.0 APPLIED TYPE ............................................ PAGE 4
1.1 GENERAL SPECIFICATIONS
1.2 MECHANICAL SPECIFICATIONS
1.3 ABSOLUTE MAXIMUM RATING
1.4 LCM MODULE INTERFACE DEFINITION
1.4.1 CELL MODULE INFORMATION
1.4.1.1 REFERENCE TO CMI V315B6-P01 SPECIFICATION
1.4.1.2 LVDS INPUT CONNECTOR PIN ASSIGNMENT
1.4.1.3 CONNECTOR EMECHANICAL SPECIFICATIONS
1.4.1.4 LVDS INTERFACE
1.4.1.5 ELECTRICAL CHARACTERISTICS FOR LVDS RECEIVER
1.4.1.6 COLOR DATA INPUT ASSIGNMENT
1.4.1.7 INPUT SIGNAL TIMING SPECIFICATIONS
1.4.1.8 CELL ON/OFF SEQUENCE
1.4.1.9 BLOCK DIAGRAM INTERFACE
1.4.2 LED BACKLIGHT MODULE
1.4.2.1 LED BACKLIGHT LIGHT ON CONNECTOR PIN DEFINITION AND SCHEMATIC
1.4.2.2 LED BACKLIGHT LED RATING SPECIFICATION
1.4.3 STATIC ELECTRICITY PROTECTION REQUIREMENT FOR LED
2.0 OPTICAL SPECIFICATIONS .......................................... PAGE 19
3.0 RELIABILITY TEST ITEM .......................................... PAGE 23
4.0 PACKING .......................................... PAGE 24
4.1 PACKING SPECIFICATIONS
4.2 PACKING METHOD
4.3 PACKAGING LABEL
5.0 PRECAUTIONS .......................................... PAGE 26
5.1 MOUNTING PRECAUTIONS
5.2 OPERATING PRECAUTONS
5.3 ELECTROSTATIC DISCHARGE CONTROL
5.4 PRECAUTIONS FOR STRONG LIGHT EXPOSURE
5.5 STORAGE
5.6 HANDLING PRECAUTIONS FOR PROTECTION FILM
6.0 LOT NO. GENERATION .......................................... PAGE 28
7.0 SALES REGION .......................................... PAGE 28
8.0 MECHANICAL CHARACTERISTICS .......................................... PAGE 29
Rev.: 01 Page: 3 of 30 Date: 2010/09/7
Specifications (Preliminary)
Doc. No4.
1.0 APPLIED TYPE
This model adopts : CMI V315B6-P01OPEN CELL.
Therefore, please refer to specifications of 315"wide TFT-LCD module for a driving method and
an electrical characteristic of cell.
1.1 GENERAL SPECIFICATIONS
Item Specification Unit Note
Active Area 697.6845(H) x 392.256 (V) (315" diagonal) mm
Bezel Opening Area 705.4 (L) x 399.8 (H) mm
Driver Element a-si TFT active matrix -
Pixel Number 1366 x R.G.B. x 768 pixel
Sub-Pixel Pitch 0.17025 (H) x 0.51075(V) mm
Pixel Arrangement RGB vertical stripe -
Display Operation Mode Normally black -
Surface Treatment Anti Glare + 3H -
1.2 MECHANICAL SPECIFICATIONS()
Item Typ. Unit Note
Horizontal(H) 741.4 mm
Module Size Vertical(V) 435.8 mm
Depth(D) 16.8 mm To Frame Rear
Weight 4.38 Kg
1.3 ABSOLUTE MAXIMUM RATING
Rev.: 01 Page: 4 of 30 Date: 2010/09/7
Specifications (Preliminary)
Doc. No5.
1.4 LCM MODULE INTERFACE DEFINITION
Rev.: 01 Page: 5 of 30 Date: 2010/09/7
Specifications (Preliminary)
Doc. No6.
1.4.1 CELL INFORMATION
1.4.1.1 REFERENCE TO CMI V315B6-P01 SPECIFICATION
1.4.1.2 LVDS INTERFACE
Note (7) General LVDS INTERFCAE
Rev.: 01 Page: 6 of 30 Date: 2010/09/7
Specifications (Preliminary)
Doc. No7.
1.4.1.3 CONNECTOR EMECHANICAL SPECIFICATIONS
Rev.: 01 Page: 7 of 30 Date: 2010/09/7
Specifications (Preliminary)
Doc. No8.
1.4.1.4 LVDS INTERFACE
Rev.: 01 Page: 8 of 30 Date: 2010/09/7
Specifications (Preliminary)
Doc. No9.
1.4.1.5 ELECTRICAL CHARACTERISTICS FOR LVDS RECEIVER
Rev.: 01 Page: 9 of 30 Date: 2010/09/7
Specifications (Preliminary)
Doc. No10.
Rev.: 01 Page: 10 of 30 Date: 2010/09/7
Specifications (Preliminary)
Doc. No11.
1.4.1.6 COLOR DATA INPUT ASSIGNMENT
Rev.: 01 Page: 11 of 30 Date: 2010/09/7
Specifications (Preliminary)
Doc. No12.
1.4.1.7 INPUT SIGNAL TIMING SPECIFICATIONS
Rev.: 01 Page: 12 of 30 Date: 2010/09/7
Specifications (Preliminary)
Doc. No13.
Rev.: 01 Page: 13 of 30 Date: 2010/09/7
Specifications (Preliminary)
Doc. No14.
Rev.: 01 Page: 14 of 30 Date: 2010/09/7
Specifications (Preliminary)
Doc. No15.
1.4.1.8 CELL ON/OFF SEQUENCE
Rev.: 01 Page: 15 of 30 Date: 2010/09/7
Specifications (Preliminary)
Doc. No16.
1.4.1.9 BLOCK DIAGRAM OF INTERFACE
Rev.: 01 Page: 16 of 30 Date: 2010/09/7
Specifications (Preliminary)
Doc. No17.
1.4.2 LED BACKLIGHT MODULE
1.4.2.1 LED BACKLIGHT LIGHT ON CONNECTOR PIN DEFINITION AND SCHEMATIC
Connector Pin Definition:
Input Connector : JST PHR-10 or equivalent
Pin No. Symbol Definition
1 LED+ Anode (+) of LED String1 & 2
2 NC NC
3 NC NC
4 LED2- LED String2(-)
5 LED1- LED String1(-)
6 LED3- LED String3(-)
7 LED4- LED String4(-)
8 NC NC
9 NC NC
10 LED+ Anode (+) of LED String 3 & 4
Schematic:
D1
LED String 1
P1 CN1
1 1
LED String 2
2
2
3
3 4
4 4pin Connector
5
6
7 CN1
8 4
9 3
2
10 1 LED String 4
Header 10 4pin Connector
LED String 3
D1
1.4.2.2 LED BACKLIGHT LED RATING SPECIFICATION
Ta=25oC
Item Min. Typ. Max. Unit Remark
Input Voltage 63.0 - 77.7 V Constant Current=125mA
Input Current
120 125 130 mA
(per string)
Rev.: 01 Page: 17 of 30 Date: 2010/09/7
Specifications (Preliminary)
Doc. No18.
1.4.3 LED ABSOLUTE MAXIMUM RATING (ELECTRICAL)
Ta=25oC
Item Symbol Min. Typ. Max. Unit Remark
LED Forward Voltage VF 3.0 - 3.6 V IF=120mA
LED Forward Current IF - 120 150 mA
LED Reverse Voltage VR 5 V
LED Power Dissipation PD 600 mW
ESD (HBM) - >1500 V Note(1)
ESD (MM) - >150 V Note(1)
Note (1) : Static electricity or surge voltage can damage the LEDs. All equipment, machinery and
the treatment persons must be properly grounded. It is recommended to use a wristband or
anti-electrostatic glove when handling the LED.
And don't touch interface pin directly.
Rev.: 01 Page: 18 of 30 Date: 2010/09/7
Specifications (Preliminary)
Doc. No19.
2.0 OPTICAL SPECIFICATIONS
Item Symbol Condition Min. Typ. Max. Unit Note
Contrast Ratio CR 3000 (1), (2), (4), (6)
Gray to
Response Time 6.5 12 ms (1), (2), (5), (6)
Gray
Brightness B1 350
350 380 cd/m2 (1), (2), (6)
Uniformity B 70 75 % (1), (2), (7)
Wx x=0