Text preview for : Panel_SHARP_LQ170K1LW02_1_[DS].pdf part of . Various Panel SHARP LQ170K1LW02 1 [DS] . Various LCD Panels Panel_SHARP_LQ170K1LW02_1_[DS].pdf
Back to : Panel_SHARP_LQ170K1LW02_1 | Home
LD-20309A-1
These specification sheets are the proprietary product of SHARP CORPORATION ("SHARP) and
include materials protected under copyright of SHARP. Do not reproduce or cause any third party to
reproduce them in any form or by any means, electronic or mechanical, for any purpose, in whole or in
part, without the express written permission of SHARP.
The device listed in these specification sheets was designed and manufactured for use in general
electronic equipment.
In case of using the device for applications such as control and safety equipment for transportation
(aircraft, trains, automobiles, etc.), rescue and security equipment and various safety related equipment
which require higher reliability and safety, take into consideration that appropriate measures such as fail-
safe functions and redundant system design should be taken.
Do not use the device for equipment that requires an extreme level of reliability, such as aerospace
applications, telecommunication equipment (trunk lines), nuclear power control equipment and medical or
other equipment for life support.
SHARP assumes no responsibility for any damage resulting from the use of the device which does not
comply with the instructions and the precautions specified in these specification sheets.
Contact and consult with a SHARP sales representative for any questions about this device.
LD-20309A-2
1. Application
This specification applies to color TFT-LCD module, LQ170K1LW02
2. Overview
This module is a color active matrix LCD module incorporating amorphous silicon TFT (Thin Film
Transistor). It is composed of a color TFT-LCD panel, driver ICs, control circuit and power supply circuit
and a backlight unit. Graphics and texts can be displayed on a 1280 3 768 dots panel with about 16
million colors by using LVDS (Low Voltage Differential Signaling) system for interface and supplying
+5.0V DC supply voltage for TFT-LCD panel driving and supply voltage for backlight.
Backlight-driving DC/AC inverter is not built in this module.
3. Outline Specifications
Parameter Specifications Unit
Display size 43 (17.0" ) Diagonal cm
Active area 369.6 (H) 221.76 (V) mm
Pixel format 1280 (H) 768 (V) pixel
(1 pixel=R+G+B dots)
Pixel pitch 0.28875 (H) 0.28875 (V) mm
Pixel configuration R, G, B vertical stripe
Display mode Normally black
Unit outline dimensions *1 413.8(W)