Text preview for : Panel_AUO_T645HW04_V0_CELL_2_[DS].pdf part of . Various Panel AUO T645HW04 V0 CELL 2 [DS] . Various LCD Panels Panel_AUO_T645HW04_V0_CELL_2_[DS].pdf
Back to : Panel_AUO_T645HW04_V0_CEL | Home
Model Name: T645HW04.0 SKD
Issue Date : 2013/5/28
()Preliminary Specifications
( )Final Specifications
Customer Signature Date AUO Date
Approved By Approval By PM Director
CP Wang
_________________________________
Note
Reviewed By RD Director
Eugene CC Chen
Reviewed By Project Leader
Bear Syong
Prepared By PM
Fanfan Lee
Contents
No
CONTENTS
RECORD OF REVISIONS
1 GENERAL DESCRIPTION
2 ABSOLUTE MAXIMUM RATINGS
3 ELECTRICAL SPECIFICATION
3-1 ELECTRIACL CHARACTERISTICS
3-2 INTERFACE CONNECTIONS
3-3 SIGNAL TIMING SPECIFICATION
3-4 SIGNAL TIMING WAVEFORM
3-5 COLOR INPUT DATA REFERENCE
3-6 POWER SEQUENCE
4 OPTICAL SPECIFICATION
5 OPEN CELL DRAWING
6 RELIABILITY TEST ITEMS
7 PACKING
7-1 DEFINITION OF LABEL
7-2 PACKING METHODS
7-3 PALLET AND SHIPMENT INFORMATION
8 PRECAUTION
8-1 MOUNTING PRECAUTIONS
8-2 OPERATING PRECAUTIONS
8-3 ELECTROSTATIC DISCHARGE CONTROL
8-4 PRECAUTIONS FOR STRONG LIGHT EXPOSURE
8-5 STORAGE
8-6 HANDLING PRECAUTIONS FOR PROTECT FILM
Record of Revision
Version Date Page Description
0.0 2013/05/28 First release
1. General Description
This specification applies to the 65.0 inch Color TFT-LCD Module T645HW04 V0. This LCD module has a TFT
active matrix type liquid crystal panel 1,920x1,080 pixels, and diagonal size of 65.0 inch. This module supports
1,920x1,080 mode. Each pixel is divided into Red, Green and Blue sub-pixels or dots which are arranged in vertical
stripes. Gray scale or the brightness of the sub-pixel color is determined with a 8-bit gray scale signal for each dot.
The T645HW04 V0 has been designed to apply the 8-bit 2 channel LVDS interface method. It is intended to
support displays where high brightness, wide viewing angle, high color saturation, and high color depth are very
important.
* General Information
Items Specification Unit Note
Active Screen Size 65.00 inch
Display Area 1428.48 (H) x 803.52 (V) mm
Outline Dimension 1461.98 (H) x 839.24 (V) mm
Driver Element a-Si TFT active matrix
Display Colors 10 bit, 1073.7M Colors
Number of Pixels 1,920x1,080 Pixel
Pixel Pitch 0.744 (H) x 0.744 (W) mm
Pixel Arrangement RGB vertical stripe
Display Operation Mode Normally Black
Surface Treatment SC
Rotate Function Unachievable Note 1
Note 1: Rotate Function refers to LCD display could be able to rotate.
2. Absolute Maximum Ratings
The followings are maximum values which, if exceeded, may cause faulty operation or damage to the unit
Item Symbol Min Max Unit Conditions
Logic/LCD Drive Voltage VDD -0.3 14 [Volt] Note 1
Input Voltage of Signal Vin -0.3 4 [Volt] Note 1
o
Operating Temperature TOP 0 +50 [ C] Note 2
Operating Humidity HOP 10 90 [%RH] Note 2
o
Storage Temperature TST -20 +60 [ C] Note 2
Storage Humidity HST 10 90 [%RH] Note 2
o
Panel Surface Temperature PST 65 [ C] Note 3
Note 1: Duration:50 msec.
Note 2 : Maximum Wet-Bulb should be 39 and No condensation.
The relative humidity must not exceed 90% non-condensing at temperatures of 40 or less. At temperatures
greater than 40 , the wet bulb temperature must not exceed 39 .
Note 3: Surface temperature is measured at 50 Dry condition
3. Electrical Specification
The T645HW04 V0 requires two power inputs. One is employed to power the LCD electronics and to drive the TFT
array and liquid crystal. The other is to power back light unit.
3.1 Electrical Characteristics
3.1.1: DC Characteristics
Value
Parameter Symbol Unit Note
Min. Typ. Max
LCD
Power Supply Input Voltage VDD 10.8 12 13.2 VDC
Power Supply Input Current IDD -- 0.61 0.75 A 1
Inrush Current IRUSH -- -- 7.5 A 2
Permissible Ripple of Power Supply Input Voltage VRP -- -- VDD * 5% mVpk-pk 3
Input Differential Voltage VID 200 400 600 mVDC 4
LVDS Differential Input High Threshold Voltage VTH +100 -- +300 mVDC 4
Interface
Differential Input Low Threshold Voltage VTL -300 -- -100 mVDC 4
Input Common Mode Voltage VICM 1.1 1.25 1.4 VDC 4
VIH
CMOS Input High Threshold Voltage 2.7 -- 3.3 VDC 5
(High)
Interface VIL
Input Low Threshold Voltage 0 -- 0.6 VDC 5
(Low)
LED lightbar and LED Backlight structure are designed by customers, AUO can not guarantee life time and
backlight power consumption.
3.1.2: AC Characteristics
Value
Parameter Symbol Unit Note
Min. Typ. Max
Input Channel Pair Skew Margin tSKEW (CP) -500 -- +500 ps 6
Receiver Clock : Spread Spectrum Fclk Fclk
Fclk_ss -- MHz 7
Modulation range -3% +3%
LVDS
Interface Receiver Clock : Spread Spectrum
Fss 30 -- 200 KHz 7
Modulation frequency
Receiver Data Input Margin
Fclk = 85 MHz tRMG -0.4 -- 0.4 ns 8
Fclk = 65 MHz -0.5 -- 0.5
SCL clock frequency FSCL 0 -- 400 KHZ
I2C clock high level TSCHi 0.6 -- -- us
I2C clock low level TSCLo 1.2 -- -- us
I2C
I2C data setup time TSDS 100 -- -- ns
Interface
I2C data hold time TSDH 0 -- 900 ns
SDA and SCL rise time TR -- -- 1000 ns
SDA and SCL fall time TF -- -- 300 ns
3.1.3: Driver Characteristics
Item Symbol Min Max Unit condition
Driver Surface Temperature DST 100 [ ] Note
Note : Any point on the driver surface must be less than 100 under any conditions.
3.1.4: TCON Characteristics
Item Symbol Min Max Unit condition
TCON Surface Temperature TST 85 [ ] Note
Note : Any point on the TCON surface must be less than 85 under any conditions.
Note :
1. Test Condition:
(1) VDD = 12.0V
(2) Fv = 60Hz
(3) Fclk= 82MHz
(4) Temperature = 25
(5) Typ. Input current : White Pattern
Max. Input current: Heavy loading pattern defined by AUO
2. Measurement condition : Rising time = 400us
VDD
90%
10%
GND
400