Text preview for : 24xxx_usb_manual.pdf part of . Various 24xxx usb manual . Various Eeprom Programmer CH341A Mini Programmer (Black Edition) By_NSC 24xxx_usb_manual.pdf
Back to : 24xxx_usb_manual.pdf | Home
USB 24xxx I2C E-Eprom programmer
Fully assembled and tested
Description :
It is an unpretentious USB programmer for the memories of the 24xxx se-
ries. The programmer is electrically supplied from the USB port.
Dimensions:
6 cm x 3.5 cm
Supply :
The programmer uses supply from the serial port and does not need exter-
nal.
Tested with memories producent :
Microchip, ATMEL, ST.
Read-Write time :
24xx32 - approximate 15 sec.
24xx512 - approximate 240 sec. (4 min.)
Software :
Free, included in complete. Works under Windows 98, 2000, XP, Vista.
(c) Sigma-Shop.com All rights reserved.
Complete includes :
- USB programmer
- Software
- USB cable
(c) Sigma-Shop.com All rights reserved.
SMD mounted EEPROM's :
This programmer can be easily adapted to
work with SMD mounted EEPROM using one
8 PIN socket and several finely wires.
Disclaimer :
In no event the author will be liable to you for damages, including any gen-
eral, special, incidental or consequential damages arising out of the use or
inability to use the program (including but not limited to loss of data or data
being rendered inaccurate or losses sustained by you or third parties or a
failure of the program to operate with any other programs), even if such
holder or other party has been advised of the possibility of such damages.
(c) Sigma-Shop.com All rights reserved.
List of devices which programmer supports :
24C00 24C32
24AA00 24LC32A
24LC00 24AA32A
24C01
24C01C 24AA52
24AA01 24LCS52
24LC01B
24C64
24AA014 24LC64
24LC014 24AA64
24FC64
24C02
24C02C 24C65
24AA02 24LC65
24LC02B 24AA65
24AA024 24C128
24LC024 24AA128
24LC128
24AA025 24FC128
24LC025
24C256
24C04 24LC256
24AA04 24AA256
24LC04B 24FC256
24C08 24C512
24AA08 24AA512
24LC08B 24LC512
24FC512
24C16
24AA16 24AA515
24LC16B 24LC515
24FC515
24LC21
24LC21A 24C1024
24LCS21A 24LC1024
24LC22A 24AA1025
24LCS22A 24FC1025
24LC1025
(c) Sigma-Shop.com All rights reserved.
Drivers and software instalation :
First you have to download the drivers from here:
http://www.ftdichip.com/Drivers/VCP.htm
Unzip it to your own folder ......
When you connect the programmer, the following message appears: FOUND
NEW HARDWARE and drives need to be installed.
When you connect the programmer to the PC the red and green LED flashes
2,3 times and turn off. When the red LED and the green LED flashes means
that there is a communication between the programmer and PC.
1. Drivers' installation:
(c) Sigma-Shop.com All rights reserved.
(c) Sigma-Shop.com All rights reserved.
After the drivers' installed, an additional COM port appears in the Device
Manager of Windows- usually it is COM3 :
(c) Sigma-Shop.com All rights reserved.
(c) Sigma-Shop.com All rights reserved.
Windows allow you to change the number of the COM port, where the pro-
grammer is connected.
(c) Sigma-Shop.com All rights reserved.
Drivers' installation finishes with those steps.
3. Download the lates version of software KEEProg_24xxx from :
http://www.sigma-shop.com/software/keeprog/
Unzip it to your own folder ......
Then start the software : KEEProg.exe
If everything is ok this message should appear:
(c) Sigma-Shop.com All rights reserved.
If you get this message you see the following error :
that means that you do not have the latest version of Microsoft .NET Frame-
work installed on your computer.
The program has to be installed on your computer in order to use the pro-
grammer.
You can download this from :
http://www.microsoft.com/downloads/
details.aspx?FamilyId=333325FD-AE52-4E35-B531-
508D977D32A6&displaylang=en
When you start the software it automatically recognizes the COM port.
(c) Sigma-Shop.com All rights reserved.
When you click on about the version of the programmer, the followng ap-
pears - KEEProg 24xx 1.0.
If something is wrong with the installation then nothing appears in these
fields.
(c) Sigma-Shop.com All rights reserved.