Text preview for : Bush_repair_tips.txt part of Bush Bush repair tips . Rare and Ancient Equipment Bush Bush_repair_tips.txt



Back to : Bush_repair_tips.txt | Home

================================================================================
MODEL: LT24M3 (Haier/Bush)
--------------------------------------------------------------------------------
FAULT: Completely dead, no power LED
Power LED flickers
Powers on when cold
Backlight flickers when power first applied
--------------------------------------------------------------------------------
DIAGNOSIS: Check for good 5V standby
Check 3.3V regulator on main board (should measure 3.3V out)
--------------------------------------------------------------------------------
FIX: Replace 3.3V regulator
================================================================================

================================================================================
MODEL: IDLCDTV37TV016HD and related IDLCDTV chassis
--------------------------------------------------------------------------------
FAULT: Stuck in standby
Takes 10-20 minutes to start up
Blue LED on front flickers
Graphical corruption on power up (lines on screen, etc.)
--------------------------------------------------------------------------------
DIAGNOSIS: Check for good 5V standby
--------------------------------------------------------------------------------
FIX: Suspect 2200uF 10V and 1000uF 35V caps
Replace the suspect capacitors even if not bulged
================================================================================