Text preview for : Panel_BOE_HV320WX2-200_0_[DS].pdf part of . Various Panel BOE HV320WX2-200 0 [DS] . Various LCD Panels Panel_BOE_HV320WX2-200_0_[DS].pdf



Back to : Panel_BOE_HV320WX2-200_0_ | Home

Global LCD Panel Exchange Center www.panelook.com

PROPRIETARY NOTE
THIS SPECIFICATION IS THE PROPERTY OF BOE HF AND SHALL NOT BE
REPRODUCED OR COPIED WITHOUT THE WRITTEN PERMISSION OF BOE HF AND
MUST BE RETURNED TO BOE HF UPON ITS REQUEST.

SPEC. NUMBER PRODUCT GROUP REV. ISSUE DATE PAGE
TFT-LCD O 2011.5.12 OF 22




TITLE : HV320WX2-200 Open Cell
Product Specification
Rev. O




B2010-6011-O(1/3) A4(210 X 297)
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com


PRODUCT GROUP REV ISSUE DATE

TFT- LCD PRODUCT O 2011.5.12
SPEC. NUMBER SPEC. TITLE : HV320WX2-200 Open Cell Preliminary PAGE
Product Specification Rev. O 2 OF 22


REVISION HISTORY

REV. ECN NO. DESCRIPTION OF CHANGES DATE PREPARED
P0 Initial Release 2011.4.12
O Add two location holes in PCB 2011.5.12




B2010-6011-O(2/3) A4(210 X 297)
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com


PRODUCT GROUP REV ISSUE DATE

TFT- LCD PRODUCT O 2011.5.12

SPEC. NUMBER SPEC. TITLE : HV320WX2-200 Open Cell Preliminary PAGE
Product Specification Rev. O 3 OF 22


Contents
No ITEM Page
REVISIONS HISTORY 2
CONTENTS 3
1 GENERAL DESCRIPTION 4
1.1 Introduction
1.2 Features
1.3 Applications
1.4 General Specification
2 ABSOLUTE MAXIMUM RATINGS 6
3 ELECTRICAL SPECIFICATIONS 7
3.1 TFT LCD Open Cell
4 INTERFACE CONNECTION 8
4.1 Open Cell Input Signal & power
4.2 LVDS Interface
5 SIGNAL TIMING SPECIFICATIONS 10
5.1 Timing Parameters
5.2 Signal Timing Waveform
5.3 Input Signals, Basic Display Colors & Cray Scale Of Colors
5.4 Power Sequence
6 OPTICAL SPECIFICATIONS 14
7 MECHANICAL CHARACTERISTICS 16
8 PRODUCT SERIAL NUMBER 17
9 PACKING INFORMATION 18
10 HANDING & CAUTIONS 20
11 APPENDIX 21




B2010-6011-O(3/3) A4(210 X 297)
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com


PRODUCT GROUP REV ISSUE DATE

TFT- LCD PRODUCT O 2011.5.12

SPEC. NUMBER SPEC. TITLE : HV320WX2-200 Open Cell Preliminary PAGE
Product Specification Rev. O 4 OF 22

1.0 GENERAL DESCRIPTION

1.1 Introduction
HV320WX2-200 is a color active matrix TFT LCD Open cell using amorphous silicon TFT's
(Thin Film Transistors) as an active switching devices. This Open Cell has a 31.51 inch
diagonally measured active area with WXGA resolutions (1366 horizontal by 768 vertical pixel
array). Each pixel is divided into RED, GREEN, BLUE dots which are arranged in vertical
stripe and this Open Cell can display 16.7M colors. The TFT-LCD panel used for this Open Cell
is adapted for a low reflection and higher color type.

RGB(Mini-LVDS)
VDD Source Driver Circuit
+12.0V
S1 S1366
LVDS
G1
5pairs CN1
Gate Driver Circuit




Timing Controller
LVDS_SEL
(30pin)
[LVDS Rx & Mini-LVDS
#9 Tx integrated]
BIST_ TFT - LCD Panel
# 27 (1366 RGB 768 pixels)


Power Circuit G768
Block




1.2 Features

z LVDS interface with 1 pixel / clock
z High-speed response
z Low color shift image quality
z 8-bit color depth, display 16.7M colors
z High luminance and contrast ratio, low reflection and wide viewing angle
z DE (Data Enable) only mode
z AFFS technology is applied for high display quality
z RoHS compliant



B2010-6011-O(3/3) A4(210 X 297)
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com


PRODUCT GROUP REV ISSUE DATE

TFT- LCD PRODUCT O 2011.5.12

SPEC. NUMBER SPEC. TITLE : HV320WX2-200 Open Cell Preliminary PAGE
Product Specification Rev. O 5 OF 22

1.3 Application

z Home Alone Multimedia TFT-LCD TV
z Display Terminals for Control System
z High Definition TV(HD TV)
z AV application Products

1.4 General Specification
< Table 1. General Specifications >

Parameter Specification Unit Remarks

Active area 697.685(H) 392.256(V) mm
Number of pixels 1366(H) 768(V) pixels
Pixel pitch 170.25(H) RGB 510.75(V)
Pixel arrangement Pixels RGB Vertical stripe
Display colors 16.7M(8bits-true) colors
Display mode Transmission mode, Normally Black
Weight 1180 (typ.) gram
Power Consumption 3 (Typ.) Watt
At center point with
Open Cell TR. 5.25 (Typ.) %
BOE module
Surface Treatment Haze 10%, 3H, Semi-glare treatment
(Front Polarizer)




B2010-6011-O(3/3) A4(210 X 297)
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com


PRODUCT GROUP REV ISSUE DATE

TFT- LCD PRODUCT O 2011.5.12

SPEC. NUMBER SPEC. TITLE : HV320WX2-200 Open Cell Preliminary PAGE
Product Specification Rev. O 6 OF 22

2.0 ABSOLUTE MAXIMUM RATINGS

The followings are maximum values which, if exceed, may cause faulty operation or
damage to the unit. The operational and non-operational maximum voltage and current
values are listed in Table 2.
< Table 2. LCD Open Cell Electrical Specifications > [VSS=GND=0V]

Parameter Symbol Min. Max. Unit Remarks

Power Supply Voltage VDD VSS-0.3 13.2 V Ta = 25
Operating Temperature TOP 0 +50
TSUR 0 +60
Storage Temperature TST -20 +60 1)
Operating Ambient Humidity Hop 10 80 %RH
Storage Humidity Hst 10 80 %RH




Note : 1) Temperature and relative humidity range are shown in the figure below.
Wet bulb temperature should be 39 max. and no condensation of water.




C

B2010-6011-O(3/3) A4(210 X 297)
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com


PRODUCT GROUP REV ISSUE DATE

TFT- LCD PRODUCT O 2011.5.12

SPEC. NUMBER SPEC. TITLE : HV320WX2-200 Open Cell Preliminary PAGE
Product Specification Rev. O 7 OF 22

3.0 ELECTRICAL SPECIFICATIONS
3.1 TFT LCD Open Cell

< Table 3. LCD Open Cell Electrical Specifications > [Ta =25 2 ]


Values
Parameter Symbol Unit Notes
Min Typ Max
Power Supply Input Voltage VDD 10.8 12 13.2 Vdc
Power Supply Ripple Voltage VRP 300 mV
Power Supply Current IDD 200 250 350 mA 1
Power Consumption PDD 3 5 Watt
Rush current IRUSH - - 2.0 A 2
Differential Input High
VLVTH +100 +300 mV
Threshold Voltage
LVDS
Differential Input Low
Interface VLVTL -300 -100 mV
Threshold Voltage
Common Input Voltage VLVC 1.0 1.2 1.4 V
Input High Threshold
VIH 2.7 - 3.3 V
CMOS Voltage
Interface Input Low Threshold
VIL 0 - 0.6 V
Voltage

Notes : 1. The supply voltage is measured and specified at the interface connector of LCM.
The current draw and power consumption specified is for VDD=12.0V, Frame rate=60Hz and
Clock frequency = 75.4MHz. Test Pattern of power supply current
a) Typ : Color Bar Pattern
b) Max : Skip Sub Dot Pattern(L0/L255)




2. The duration of rush current is about 2ms and rising time of Power Input is 1ms(min)




B2010-6011-O(3/3) A4(210 X 297)
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com


PRODUCT GROUP REV ISSUE DATE

TFT- LCD PRODUCT O 2011.5.12

SPEC. NUMBER SPEC. TITLE : HV320WX2-200 Open Cell Preliminary PAGE
Product Specification Rev. O 8 OF 22

4.0 INTERFACE CONNECTION
4.1 Open Cell Input Signal & Power
- Connector : IS100-L30B-C23(Manufactured by UJU) or Equivalent.

< Table 4. Open Cell Input Connector Pin Configuration >
Pin No Symbol Description Pin No Symbol Description
1 VDD Power Supply +12.0V 16 RX1+ LVDS Receiver Signal(+)
2 VDD Power Supply +12.0V 17 GND Ground
3 VDD Power Supply +12.0V 18 RX2- LVDS Receiver Signal(-)
4 VDD Power Supply +12.0V 19 RX2+ LVDS Receiver Signal(+)
5 GND Ground 20 GND Ground
6 GND Ground 21 RCLK- LVDS Receiver Clock Signal(-)
7 GND Ground 22 RCLK+ LVDS Receiver Clock Signal(+)
8 GND Ground 23 GND Ground
9 LVDS_SEL `L'=JEIDA , `H'or NC= VESA 24 RX3- LVDS Receiver Signal(-)
10 NC No Connection 25 RX3+ LVDS Receiver Signal(+)
11 GND Ground 26 GND Ground
`L' or NC=Free run mode ,
12 RX0- LVDS Receiver Signal(-) 27 BIST
`H'= BIST mode
13 RX0+ LVDS Receiver Signal(+) 28 NC No Connection
14 GND Ground 29 NC No Connection
15 RX1- LVDS Receiver Signal(-) 30 GND Ground
Notes : 1. NC(Not Connected) : This pins are only used for BOE internal operations.
2. Input Level of LVDS signal is based on the IEA 664 Standard.
3. LVDS_SEL : This pin is used for selecting LVDS signal data format.
If this Pin : High (3.3V) or Open (NC)