Text preview for : Panel_LG_Display_LM215WF3-SDB1_0_[DS].pdf part of . Various Panel LG Display LM215WF3-SDB1 0 [DS] . Various LCD Panels Panel_LG_Display_LM215WF3-SDB1_0_[DS].pdf
Back to : Panel_LG_Display_LM215WF3 | Home
Global LCD Panel Exchange Center www.panelook.com
LM215WF3
Liquid Crystal Display
Product Specification
SPECIFICATION
FOR
APPROVAL
( ) Preliminary Specification
( ) Final Specification
Title 21.5" Full HD TFT LCD
BUYER APPLE SUPPLIER LG Display Co., Ltd.
MODEL K74 PRQ *MODEL LM215WF3
SUFFIX SDB1
*When you obtain standard approval,
please use the above model name without suffix
SIGNATURE SIGNATUR
APPROVED BY APPROVED BY
DATE E DATE
/ S. Y. Park / G.Manager
REVIEWED BY
D. Y. KIM / Manager [C]
/ D. Y. KIM/ Manager [M]
D. H. Kang / Manager [P]
PREPARED BY
/
Y. T. YOO / Engineer
Please return 1 copy for your confirmation with
MNT Products Engineering Dept.
your signature and comments. LG Display Co., Ltd
Ver. 1.1 September. 14 . 2010 1 / 35
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
LM215WF3
Liquid Crystal Display
Product Specification
Contents
No ITEM Page
COVER 1
CONTENTS 2
RECORD OF REVISIONS 4
1 GENERAL DESCRIPTION 5
2 ABSOLUTE MAXIMUM RATINGS 6
3 ELECTRICAL SPECIFICATIONS 7
3-1 ELECTRICAL CHARACTREISTICS 7
3-2 INTERFACE CONNECTIONS 9
3-3 SIGNAL TIMING SPECIFICATIONS 12
3-4 SIGNAL TIMING WAVEFORMS 13
3-5 COLOR INPUT DATA REFERNECE 14
3-6 POWER SEQUENCE 15
4 OPTICAL SFECIFICATIONS 18
5 MECHANICAL CHARACTERISTICS 24
6 RELIABLITY 27
7 INTERNATIONAL STANDARDS 28
7-1 SAFETY 28
7-2 EMC 28
7-3 ENVIRONMENT 28
8 PACKING 29
8-1 DESIGNATION OF LOT MARK 29
8-2 PACKING FORM 29
9 PRECAUTIONS 30
9-1 MOUNTING PRECAUTIONS 30
9-2 OPERATING PRECAUTIONS 30
9-3 ELECTROSTATIC DISCHARGE CONTROL 31
9-4 PRECAUTIONS FOR STRONG LIGHT EXPOSURE 31
9-5 STORAGE 31
9-6 HANDLING PRECAUTIONS FOR PROTECTION FILM 31
Ver. 1.1 September. 14 . 2010 2 / 35
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
LM215WF3
Liquid Crystal Display
Product Specification
Contents
No ITEM Page
10 EDID DATA 32
10-1 EDID DATA 32
10-2 EDID READ/WRITE PROTOCOL 35
Ver. 1.1 September. 14 . 2010 3 / 35
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
LM215WF3
Liquid Crystal Display
Product Specification
RECORD OF REVISIONS
Revision
Revision Date Page Description
No
0.0 Jan. 21. 2010 - First Draft (Preliminary)
0.1 Mar. 25. 2010 5 Update General Description
8 Update LED Bar ELECTRICAL CHARACTERISTICS
10 Remove Thermal Sensor Connector
18 Update Optical Specifications (Color coordinates)
24 Update Mechanical Characteristics (Weight)
32~35 Update the EDID Data
1.0 July. 19. 2010 5 Update Power Consumption
6 Update Note.2
7 Update Power Consumption
8 Update Table 2-2 and Notes. 6
11 Update Figure 4
15~16 Update Power sequence
25~26 Update drawing
28 Update Safety Standards
32~35 Update EDID
1.1 Sep. 14. 2010 8 Update LED Bar Electrical Characteristics
Ver. 1.1 September. 14 . 2010 4 / 35
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
LM215WF3
Liquid Crystal Display
Product Specification
1. General Description
LM215WF3 is a Color Active Matrix Liquid Crystal Display with Light Emitting Diode ( White LED) backlight
system without LED driver. The matrix employs a-Si Thin Film Transistor as the active element.
It is a transmissive type display operating in the normally white mode. It has a 21.5inch diagonally
measured active display area with Full HD resolution (1080 vertical by 1920 horizontal pixel array)
Each pixel is divided into Red, Green and Blue sub-pixels or dots which are arranged in vertical stripes.
Gray scale or the brightness of the sub-pixel color is determined with a 10bit gray scale signal for each dot,
thus, presenting a palette of more than 16M colors with FRC (Frame Rate Control). .
It has been designed to apply the 8bit 4Lane Display port interface.
It is intended to support displays where high brightness, super wide viewing angle,
high color saturation, and high color are important.
RGB
EEPROM Flash Source Driver Circuit
EEPROM
(LUT) Memory
I2C SPI I2C S1 S1920
Main Link G1
2 Lane
Gate Driver Circuit
AUX CH Timing
CN1
HPD (30pin) Controller
TFT - LCD Panel
LCD Power
(1920 RGB 1080 pixels)
12 V Power
Logic Power
Enable
3.3V / 1.2V (Video On) G1080
Power Circuit
Block
VLED 3ch
B/L System (White LED)
[ Figure 1 ] Block diagram
General Features
Active Screen Size 21.46 inches(545.22mm) diagonal
Outline Dimension 495.6(H) x 305.25(V) x 14.8(D) mm(Typ.)
Pixel Pitch 0.2475mm x 0.2475mm
Pixel Format 1920 horiz. By 1080 vert. Pixels RGB stripes arrangement
Color Depth 8-bit, 16,777,216 colors
Luminance, White 365 cd/m2 ( 5point Avg.)
Viewing Angle(CR>10) View Angle Free (R/L 178(Typ.), U/D 178(Typ.))
Total 46.7 Watt (Max.)
Power Consumption
(7.5 Watt @VLCD, Max 39.2 Watt_ Duty 100% of DC 350 mA_ w/o driver)
Weight 2100g (typ.)
Display Operating Mode Transmissive mode, normally black
Surface Treatment Hard coating(2H), Glare (Low Reflection treatment of the front polarizer)
Ver. 1.1 September. 14 . 2010 5 / 35
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
LM215WF3
Liquid Crystal Display
Product Specification
2. Absolute Maximum Ratings
The following are maximum values which, if exceeded, may cause faulty operation or damage to the unit.
Table 1. ABSOLUTE MAXIMUM RATINGS
Values
Parameter Symbol Units Notes
Min Max
Power Input Voltage VLCD -0.3 14 Vdc at 25 r 2 C
Operating Temperature TOP 0 50 C
Storage Temperature TST -20 60 C
1
Operating Ambient Humidity HOP 10 90 %RH
Storage Humidity HST 10 90 %RH
Note.
1. Temperature and relative humidity range are shown in the figure below.
Wet bulb temperature should be 39 C Max, and no condensation of water.
2. Storage condition is guaranteed under packing condition.
90%
60
60%
50 Storage
Humidity [(%)RH]
Wet Bulb
Temperature [C]
40
40%
Operation
30
20
10
0
10%
-20 0 10 20 30 40 50 60 70 80
Dry Bulb Temperature [C]
[ Figure 2 ] Temperature and relative humidity
Ver. 1.1 September. 14 . 2010 6 / 35
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
LM215WF3
Liquid Crystal Display
Product Specification
3. Electrical Specifications
3-1. Electrical Characteristics
It requires two power inputs. One is employed to power the LCD electronics and to drive the TFT array and
liquid crystal. The second input power for the WLED.
Table 2-1. ELECTRICAL CHARACTERISTICS
Values
Parameter Symbol Unit Notes
Min Typ Max
MODULE :
Power Supply Input Voltage VLCD 11.4 12.0 12.6 Vdc
Permissive Power Input Ripple VRF - - 400 mV
310 387 464 mA 1
Power Supply Input Current ILCD
416 520 624 mA 2
PLCD 4.64 5.57 Watt 1
Power Consumption
PLCD 6.24 7.50 Watt 2
Rush current IRUSH - - 3.0 A 3
Note.
1. The specified current and power consumption are under the V LCD=12.0V, 25 r 2 C,fV=60Hz condition
whereas mosaic pattern(8 x 6) is displayed and fV is the frame frequency.
2. The current is specified at the maximum current pattern.
3. The duration of rush current is about 2ms and rising time of power Input is 1ms(min.)
White : 255Gray
Black : 0Gray Maximum current pattern
Mosaic Pattern(8 x 6) White Pattern
Ver. 1.1 September. 14 . 2010 7 / 35
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
LM215WF3
Liquid Crystal Display
Product Specification
Table 2-2. LED Bar ELECTRICAL CHARACTERISTICS
Spec
Items Symbol Unit Remark Notes
Min Typ Max
Ta=25 , at Duty 100% 1,2,3,
LED String Voltage VS 49.6 52.8 56.0 Vrms
of DC 350mA 7
Ta=25 , at Duty 100% 1,2,3,
LED String Power PS 17.36 18.48 19.60 W
of DC 350mA 4,6,7
Ta=25 , at Duty 100% 1,2,4,
BL Power PBL - 36.96 39.2 W
of DC 350mA 6,7
Tj90 , at Duty 100%
LED Life Time LED_LT 30K - Hrs 5,7,8
of DC 350mA
LED Junction Temperature Tj 150 - 7,8
LED driver design guide
: The design of the LED driver must have specifications for the LED in LCD Assembly.
The performance of the LED in LCM, for example life time or brightness, is extremely influenced by
the characteristics of the LED driver.
So all the parameters of an LED driver should be carefully designed and output current should be
Constant current control.
Please control feedback current of each string individually to compensate the current variation
among the strings of LEDs.
When you design or order the LED driver, please make sure unwanted lighting caused by
the mismatch of the LED and the LED driver (no lighting, flicker, etc) never occurs.
When you confirm it, the LCD module should be operated in the same condition as installed in
your instrument.
1. Specified values are for a single LED bar.
2. The specified current is input LED chip 100% duty current.
3. The specified voltage is input LED string and Bar voltage at typical 350mA 100% duty current.
4. The specified power consumption is input LED bar power consumption at typical 350mA 100% duty current.
5. The LED life time is determined as the time at which brightness of the LED is 70% compared to that of initial
value at the typical LED current on condition of continuous operating at below junction temperature 90 C.
6. The LED power consumption shown above does not include loss of external driver.
The used LED BL current is the LED typical current.
String Power Consumption is calculated with PS = VS x 350mA
BL Power Consumption is calculated with PBL = VS x 350mA x 2(string no.)
7. LED operating DC Forward Current and Junction Temperature must not exceed LED Max Ratings.
8. The LED life time and the maximum rating of LED junction temperature are evaluated at LED package level,
not at liquid crystal module level.
Ver. 1.1 September. 14 . 2010 8 / 35
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
LM215WF3
Liquid Crystal Display
Product Specification
3-2. Interface Connections
3-2-1. LCD Module
- LCD Connector(CN1) :FI-X30SSL-HF (JAE), MDF76LBRW-30S-1H (Hirose) or Equivalent
- Mating Connector : FI-XC30C2L (Manufactured by JAE) or Equivalent
Table 3. MODULE CONNECTOR(CN1) PIN CONFIGURATION
No Symbol Description No Symbol Description
1 DDC_SCL DDC Clock 16 Lane3P True Signal for Main Link 3
2 DDC_SDA DDC Data 17 Lane3N Component Signal for Main Link 3
3 GND High Speed Ground for Auxiliary Channel 18 GND High Speed Ground
4 AUX_CH_N Component Signal for Auxiliary Channel 19 SPDIF Audio output from DP RX
5 AUX_CH_P True Signal for Auxiliary Channel 20 VIDEO_ON Video status from DP RX
6 GND High Speed Ground for Main Link 0 21 HPD Hot Plug Detect Signal
7 Lane0P True Signal for Main Link 0 22 GND GND for main power
8 Lane0N Component Signal for Main Link 0 23 GND GND for main power
9 GND High Speed Ground for Main Link 1 24 GND GND for main power
10 Lane1P True Signal for Main Link 1 25 GND GND for main power
11 Lane1N Component Signal for Main Link 1 26 VLCD 12V for LCM main power
12 GND High Speed Ground for Main Link 2 27 VLCD 12V for LCM main power
13 Lane2P True Signal for Main Link 2 28 VLCD 12V for LCM main power
14 Lane2N Component Signal for Main Link 2 29 VLCD 12V for LCM main power
15 GND High Speed Ground for Main Link 3 30 VSYNC Sync. signal
Note: 1. All GND(ground) pins should be connected together and to Vss which should also be connected to
the LCD's metal frame.
2. All VLCD (power input) pins should be connected together.
[ Figure 3 ] User Connector diagram
1 30
#1 #30
Rear view of LCM
FI-X30SSL-HF (JAE)
Ver. 1.1 September. 14 . 2010 9 / 35
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
LM215WF3
Liquid Crystal Display
Product Specification
3-2-2. User Connector
This connector is used for synchronized LED Driver.
FFC connector is 53780-8604. (Manufactured by MOLEX)
Table 4. LED SYNCHRONIZED CONNECTOR(CN3) PIN CONFIGURATION
Pin Symbol Description NOTES
1 GND Ground
2 EN Enable
3 PWM PWM for synchronized LED Driver 1
4 GSP GSP for synchronized LED Driver 2
Note: 1. PWM signal follows multiplied Horizontal frequency and level is 3.3V TTL level.
2. GSP frequency follows refresh time and level is 3.3V TTL level
and high width is 1/(Horizotal freq).
Ver. 1.1 September. 14 . 2010 10 / 35
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
LM215WF3
Liquid Crystal Display
Product Specification
3-2-3. Backlight Interface
Driver connector: H401K-D06N-12B (Manufactured by E&T)
Mating Connector: 4530K-F06N-01R (Manufactured by E&T)
Table 5. LED DRIVER CONNECTOR PIN CONFIGURATION
Pin Symbol Description NOTES
1 LED1- LED channel 1 cathode