Text preview for : Panel_AUO_T650HVN04-0_0_[DS].pdf part of . Various Panel AUO T650HVN04-0 0 [DS] . Various LCD Panels Panel_AUO_T650HVN04-0_0_[DS].pdf



Back to : Panel_AUO_T650HVN04-0_0_[ | Home

Global LCD Panel Exchange Center www.panelook.com




Model Name: T650HVN04.0
Issue Date : 2012/06/14

( )Preliminary Specifications
( )Final Specifications




Customer Signature Date AUO Date

Approved By Approval By PM Director

CP Wang

_________________________________ ____________________________________


Note Reviewed By RD Director

Eugene CC Chen
____________________________________
Reviewed By Project Leader

Hank Chiu
____________________________________


Prepared By PM

Fanfan Lee

____________________________________




One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com




Contents
No
CONTENTS

RECORD OF REVISIONS

1 GENERAL DESCRIPTION

2 ABSOLUTE MAXIMUM RATINGS

3 ELECTRICAL SPECIFICATION

3-1 ELECTRIACL CHARACTERISTICS

3-2 INTERFACE CONNECTIONS

3-3 SIGNAL TIMING SPECIFICATION

3-4 SIGNAL TIMING WAVEFORM

3-5 COLOR INPUT DATA REFERENCE

3-6 POWER SEQUENCE

3-7 BACKLIGHT SPECIFICATION

4 OPTICAL SPECIFICATION

5 MECHANICAL CHARACTERISTICS

6 RELIABILITY TEST ITEMS

7 INTERNATIONAL STANDARD

7-1 SAFETY

7-2 EMC

8 PACKING

8-1 DEFINITION OF LABEL

8-2 PACKING METHODS

8-3 PALLET AND SHIPMENT INFORMATION

9 PRECAUTION

9-1 MOUNTING PRECAUTIONS

/9-2 OPERATING PRECAUTIONS

9-3 ELECTROSTATIC DISCHARGE CONTROL

9-4 PRECAUTIONS FOR STRONG LIGHT EXPOSURE

9-5 STORAGE

9-6 HANDLING PRECAUTIONS FOR PROTECT FILM




One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com




Record of Revision
Version Date Page Description
0.0 2012/02/21 First release
0.1 2012/04/03 Pin assignment revised
0.2 2012/04/19 3-7spec updated
0.3 2012/05/03 20, 29 Update Internal PWM & Reliability test items
10, 11,
0.4 2012/05/30 Update connector spec
18, 19




One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com




1. General Description
This specification applies to the 65.0 inch Color TFT-LCD Module T650HVN04.0. This LCD module has a TFT
active matrix type liquid crystal panel 1,920x1,080 pixels, and diagonal size of 65.0 inch. This module supports
1,920x1,080 mode. Each pixel is divided into Red, Green and Blue sub-pixels or dots which are arranged in vertical
stripes. Gray scale or the brightness of the sub-pixel color is determined with a 10-bit gray scale signal for each
dot.
The T650HVN04.0 has been designed to apply the 10-bit 2 channel LVDS interface method. It is intended to
support displays where high brightness, wide viewing angle, high color saturation, and high color depth are very
important.




* General Information


Items Specification Unit Note
Active Screen Size 65.00 inch
Display Area 1428.48 (H) x 803.52 (V) mm
Outline Dimension 1508.0(H) x 878.0(V) x 26.6(D) mm D: front bezel to T-con cover
Driver Element a-Si TFT active matrix
Bezel Opening 1440.6 (H) x 814.6 (V) mm
Display Colors 10 bit, 1.07B Colors
Number of Pixels 1,920x1,080 Pixel
Pixel Pitch 0.744 mm
Pixel Arrangement RGB vertical stripe
Display Operation Mode Normally Black
Rotate Function Unachievable
.




One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com




2. Absolute Maximum Ratings
The followings are maximum values which, if exceeded, may cause faulty operation or damage to the unit


Item Symbol Min Max Unit Conditions
Logic/LCD Drive Voltage Vcc -0.3 14 [Volt] Note 1
Input Voltage of Signal Vin -0.3 4 [Volt] Note 1
o
Operating Temperature TOP 0 +50 [ C] Note 2
Operating Humidity HOP 10 90 [%RH] Note 2
o
Storage Temperature TST -20 +60 [ C] Note 2
Storage Humidity HST 10 90 [%RH] Note 2
o
Panel Surface Temperature PST 65 [ C] Note 3

Note 1: Duration:50 msec.
Note 2 : Maximum Wet-Bulb should be 39 and No condensation.
The relative humidity must not exceed 90% non-condensing at temperatures of 40 or less. At temperatures
greater than 40 , the wet bulb temperature must not exceed 39 .
Note 3: Surface temperature is measured at 50 Dry condition




One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com




3. Electrical Specification
The T650HVN04.0 requires two power inputs. One is employed to power the LCD electronics and to drive the TFT
array and liquid crystal.


3.1 Electrical Characteristics

3.1.1: DC Characteristics

Value
Parameter Symbol Unit Note
Min. Typ. Max
LCD
Power Supply Input Voltage VDD 10.8 12 13.2 VDC
Power Supply Input Current IDD -- 1.56 1.93 A 1
Power Consumption PC -- 18.72 23.16 Watt 1
Inrush Current IRUSH -- -- 7.5 A 2

Input Differential Voltage VID 200 400 600 mVDC 3

LVDS Differential Input High Threshold Voltage VTH +100 -- +300 mVDC 3
Interface
Differential Input Low Threshold Voltage VTL -300 -- -100 mVDC 3

Input Common Mode Voltage VICM 1.1 1.25 1.4 VDC 3
VIH
CMOS Input High Threshold Voltage 2.7 -- 3.3 VDC 5
(High)
Interface VIL
Input Low Threshold Voltage 0 -- 0.6 VDC 5
(Low)
Backlight Power Consumption PBL 182.2 202.4 Watt
Life time (MTTF) 30000 Hour 9,10




One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com




3.1.2: AC Characteristics

Value
Parameter Symbol Unit Note
Min. Typ. Max

Input Channel Pair Skew Margin tSKEW (CP) -500 -- +500 ps 6

Receiver Clock : Spread Spectrum Fclk Fclk
Fclk_ss -- MHz 7
Modulation range -3% +3%
LVDS
Interface Receiver Clock : Spread Spectrum
Fss 30 -- 200 KHz 7
Modulation frequency
Receiver Data Input Margin
Fclk = 85 MHz tRMG -0.4 -- 0.4 ns 8
Fclk = 65 MHz -0.5 -- 0.5


Note :
1. VDD = 12.0V, Fv = 120Hz, Fclk= Max freq., 25 , Test Pattern : White Pattern
2. Measurement condition : Rising time = 400us

9''





*1'

s

3. VICM = 1.25V

LVDS -
V IC M V TH
|V ID |
V TL
LVDS +



GND




|V ID |

0V

|V ID |




4. DCR Interface: Function Table




One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com




Input Output
DCR_Enable DIM_IN DIM_OUT
High PWM Input DCR Dimming Out
Low PWM Input PWM Input
NC NC Keep High

Note.(4-1) : During the deep duty control, partial darkness or center darkness might happen
due to insufficient LED current.

Note.(4-2): At low temperature, more warm up time may be needed.
5. The measure points of VIH and VIL are in LCM side after connecting the System Board and LCM.
6. Input Channel Pair Skew Margin




Note: x = 0, 1, 2, 3, 4


7. LVDS Receiver Clock SSCG (Spread spectrum clock generator) is defined as below figures


)66
)FONBVVPD[
)FONBVVPD[


)FON


)FONBVVPLQ
)FONBVVPLQ




One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com




8. Receiver Data Input Margin
Rating
Parameter Symbol Unit Note
Min Type Max
Input Clock Frequency Fclk Fclk (min) -- Fclk (max) MHz T=1/Fclk
Input Data Position0 tRIP1 -|tRMG| 0 |tRMG| ns
Input Data Position1 tRIP0 T/7-|tRMG| T/7 T/7+|tRMG| ns
Input Data Position2 tRIP6 2T/7-|tRMG| 2T/7 2T/7+|tRMG| ns
Input Data Position3 tRIP5 3T/7-|tRMG| 3T/7 3T/7+|tRMG| ns
Input Data Position4 tRIP4 4T/7-|tRMG| 4T/7 4T/7+|tRMG| ns
Input Data Position5 tRIP3 5T/7-|tRMG| 5T/7 5T/7+|tRMG| ns
Input Data Position6 tRIP2 6T/7-|tRMG| 6T/7 6T/7+|tRMG| ns




W5,3
W5,3
W5,3
W5,3
W5,3
W5,3
W5,3
/9'65[
5[ 5[ 5[ 5[ 5[ 5[ 5[ 5[ 5[ 5[ 5[ 5[
,QSXW 'DWD
/9'65[
,QSXW &ORFN 9GLII 9


)FON 7


9. The relative humidity must not exceed 80% non-condensing at temperatures of 40 or less. At
temperatures greater than 40 , the wet bulb temperature must not exceed 39 . When operate at low
temperatures, the brightness of LED will drop and the life time of LED will be reduced.
10. The lifetime (MTTF) is defined as the time which luminance of LED is 50% compared to its original value.
[Operating condition: Continuous operating at Ta = 25