Text preview for : Panel_AU_Optronics_M170XW01_V1_0_[DS].pdf part of . Various Panel AU Optronics M170XW01 V1 0 [DS] . Various LCD Panels Panel_AU_Optronics_M170XW01_V1_0_[DS].pdf
Back to : Panel_AU_Optronics_M170XW | Home
Global LCD Panel Exchange Center www.panelook.com
Spec. No.: DDPM-XW01-0.5
Version: 1
Total pages: 29
Date: 2004-May-27
AU OPTRONICS CORPORATION
Product Specifications
17.0" WXGA Color TFT-LCD Module
Model Name: M170XW01 V.1
Approved by Prepared by
CC Chiu Gary Chen
DDBU Marketing Division / AU Optronics Croporation
Customer Checked & Approved by
(C) Copyright AU Optronics, Inc. Page 1 of 29
January, 2003 All Rights Reserved. M170XW01 V.1 Ver0.5
No Reproduction and Redistribution Allowed.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
Product Specifications
17.0" WXGA Color TFT-LCD Module
Model Name: M170XW01
V.1
( ) Preliminary Specifications
( ) Final Specifications
Note: This Specification is subject to change without notice.
(C) Copyright AU Optronics, Inc. Page 2 of 29
January, 2003 All Rights Reserved. M170XW01 V.1 Ver0.5
No Reproduction and Redistribution Allowed.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
i Contents
ii Record of Revision
1.0 Handling Precautions
2.0 General Description
2.1 Display Characteristics
2.2 Functional Block Diagram
2.3 Optical Characteristics
2.4 Pixel format image
3.0 Electrical characteristics
3.1 Absolute Maximum Ratings
3.2 Connectors
3.3 Signal Pin
3.4 Signal Description
3.5 Interface Timing
3.5.1 Timing Characteristics
3.5.2 Timing Definition
3.6 Power Consumption
3.7 Power ON/OFF Sequence
4.0 Backlight Characteristics
4.1 Signal for Lamp connector
4.2 Parameter guideline for CCFL Inverter
5.0 Vibration, shock and drop
5.1 Vibration and shock
5.2 Drop test
6.0 Environment
6.1 Temperature and humidity
6.1.1 Operating conditions
6.1.2 Shipping conditions
6.2 Atmospheric pressure
(C) Copyright AU Optronics, Inc. Page 3 of 29
January, 2003 All Rights Reserved. M170XW01 V.1 Ver0.5
No Reproduction and Redistribution Allowed.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
6.3 Thermal shock
7.0 Reliability
7.1 Failure criteria
7.2 Failure rate
7.2.1 Usage
7.3 ON/OFF cycle
8.0 Safety
8.1 Sharp edge requirement
8.2 Material
8.2.1 Toxicity
8.2.2 Flammability
8.3 Capacitors
9.0 Other requirements
9.1 Smoke free design
9.2 National test lab requirement
10.0 Mechanical Characteristics
(C) Copyright AU Optronics, Inc. Page 4 of 29
January, 2003 All Rights Reserved. M170XW01 V.1 Ver0.5
No Reproduction and Redistribution Allowed.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
ii Record of Revision
Version and Date Page Old description New Description Remark
0.1 2003/12/15 All First Edition for Customer All
Electrical Interface Electrical Interface
0.2 2004/02/05 07 Update
= R/G/B data, clock = LVDS (1 ch)
16 Max. frame rate =70Hz Max. frame rate = 80Hz Update
0.3 2004/03/01 25 The thickness= 17.2 0.5 The thickness= 17.3 0.5 Update
0.4 2004/05/24 07 Contrast Ratio= 600:1(Typ) Contrast Ratio= 800:1(Typ) Update
09 Flicker= NA Flicker (Max= -20dB) Update
15, 16 Signal Description Add Note 1, 2, 3 Update
Data CLK(Min=35, Max=83MHz) Data CLK(Min=45, Max=81MHz)
H-Period (Min=1320 Tclk) H-Period (Min=1330 Tclk)
18 Update
V-Period (Max=823 Th) V-Period (Max=860 Th)
Frame Rate (Max=80Hz) Frame Rate (Max=75Hz)
20 Irush= (Max= TBD) Irush= (Max= 3.0A) Update
Power ON/OFF Sequence Power ON/OFF Sequence
21 T1 (Min= NA) T1 (Min= 0.5 ms) Update
T6 (Min= NA) T6 (Min= 0.5 ms)
LTCFL (Min= 30,000 Hours) LTCFL (Min= 25,000 Hours)
0.5 2004/05/27 22 Update
(Typ= NA) (Typ= 35,000 Hours)
(C) Copyright AU Optronics, Inc. Page 5 of 29
January, 2003 All Rights Reserved. M170XW01 V.1 Ver0.5
No Reproduction and Redistribution Allowed.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
1.0 Handling Precautions
1. Since front polarizer is easily damaged, pay attention not to scratch it.
2. Be sure to turn off power supply when inserting or disconnecting from input connector.
3. Wipe off water drop immediately. Long contact with water may cause discoloration or
spots.
4. When the panel surface is soiled, wipe it with absorbent cotton or other soft cloth.
5. Since the panel is made of glass, it may break or crack if dropped or bumped on hard
surface.
6. Since CMOS LSI is used in this module, take care of static electricity and insure
human earth when handling.
7. Do not open nor modify the Module Assembly.
8. Do not press the reflector sheet at the back of the module to any directions.
9. At the insertion or removal of the Signal Interface Connector, be sure not to rotate nor
tilt the Interface Connector of the TFT-LCD module.
10. After installation of the TFT-LCD module into an enclosure (LCD monitor housing, for
example), do not twist nor bend the TFT -LCD module even momentary. At designing
the enclosure, it should be taken into consideration that no bending/twisting forces are
applied to the TFT -LCD module from outside. Otherwise the TFT -LCD module may
be damaged.
(C) Copyright AU Optronics, Inc. Page 6 of 29
January, 2003 All Rights Reserved. M170XW01 V.1 Ver0.5
No Reproduction and Redistribution Allowed.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
2.0 General Description
This specification applies to the 17.0 inch wide Color TFT-LCD Module M170XW01.The
display supports the WXGA (1280 x 768) screen format and 16.2M colors (RGB 6-bits +
FRC data). All input signals are 1 Channel LVDS interface compatible. This module
does not contain an inverter card for backlight.
2.1 Display Characteristics (under 25 condition)
ITEMS Unit SPECIFICATIONS
Screen Diagonal [mm] 432(17.0" Wide)
Active Area [mm] 370.56 (H) x 222.34 (V)
Pixels H x V 1280(x3) x 768
Pixel Pitch [mm] 0.2895 (per one triad) x 0.2895
Pixel Arrangement R.G.B. Vertical Stripe
Display Mode Normally Black
2
White Luminance [cd/m ] 450 (center, Typ) @11mA
Contrast Ratio 800 : 1 (Typ)
Optical Response Time [msec] 25 (Typ)
Color Saturation 72% NTSC
Nominal Input Voltage VDD [Volt] +5.0 V
Power Consumption [Watt] 30W (Typ)
(VDD line + CCFL line) (w/o Inverter, All white pattern)
Weight [Grams] 2000 (Typ)
Physical Size [mm] 404 (H) x 248.5 (V) x 17.2 (D) (Typ)
Electrical Interface LVDS (1 ch)
Support Color 16.2M colors (RGB 6-bit + FRC data)
Temperature Range
Operating [oC] 0 to +50
Storage (Shipping) [oC] -20 to +60
(C) Copyright AU Optronics, Inc. Page 7 of 29
January, 2003 All Rights Reserved. M170XW01 V.1 Ver0.5
No Reproduction and Redistribution Allowed.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
2.2 Functional Block Diagram
The following diagram shows the functional block of the 17.0 inches Wide Color TFT-LCD
Module:
AU ASIC
G1
Timing
Y-Driver IC
Controller TFT-LCD
LVDS 1280*(3)*768
Connector
Receiver Pixels
RSDS
Transmitte
X-Driver IC
G768
D1 D3840
+ 5V 4 CCFL
DC/DC Gamma
Converter Correction
DC POWER
Inverter
HIROSE DF14H-20P-1.25H
Mating Type: HIROSE DF14-20S-1.25C
(C) Copyright AU Optronics, Inc. Page 8 of 29
January, 2003 All Rights Reserved. M170XW01 V.1 Ver0.5
No Reproduction and Redistribution Allowed.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
2.3 Optical Characteristics (under 25 condition)
Item Unit Conditions Min. Typ. Max. Note
Horizontal (Right) 75 85 -
CR = 10 (Left) 75 85 -
Viewing Angle [degree]
Vertical (Up) 75 85 -
CR = 10 (Down) 75 85 -
Contrast ratio Normal Direction 600 800 -
Rasing Time - 15 25
Response Time [msec] Falling Time - 10 15 Note 1
Raising + Falling - 25 40
Red x 0.61 0.64 0.67
Red y 0.31 0.34 0.37
Color / Chromaticity Green x 0.26 0.29 0.32
Coordinates (CIE) Green y 0.58 0.61 0.64
Blue x 0.11 0.14 0.17
Blue y 0.04 0.07 0.10
Color Coordinates (CIE) White x 0.28 0.31 0.34
White White y 0.30 0.33 0.36
White Luminance @ 2
[cd/m ] 400 450 -
CCFL 11.0mA (Center)
Luminance Uniformity [%] 75 80 Note 2
Crosstalk (in 75Hz) [%] - - 1.5 Note 3
Flicker dB - - -20 Note 4
(C) Copyright AU Optronics, Inc. Page 9 of 29
January, 2003 All Rights Reserved. M170XW01 V.1 Ver0.5
No Reproduction and Redistribution Allowed.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
Equipment: Pattern Generator, Power Supply, Digital Voltmeter, Luminance meter
(PR 880, BM-5A / BM7)
Aperture 1 with 100cm VD or 2 with 50cm viewing distance
Test Point Center (VESA point 9)
Environment < 1 lux
LCD Module
PR-880 /
BM5A /
BM7
measuring distance
Module Driving Equipment
Note 1: The Definition of Response time
The output signals of photodetector are measured when the input signals are changed from
"Black" to "White" (rising time), and from "White" to "Black "(falling time), respectively. The
response time is interval between the 10% and 90% of amplitudes.
% TrF TrR
100
90
Optical
White Black White
response
10
0
(C) Copyright AU Optronics, Inc. Page 10 of 29
January, 2003 All Rights Reserved. M170XW01 V.1 Ver0.5
No Reproduction and Redistribution Allowed.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
Note 2: Brightness uniformity of these 9 points is defined as below
90 % 50 % 10 %
10 %
50 %
90 %
Minimum Luminance in 9 Points (1-9)
Uniformity = ----------------------------------------
Maximum Luminance in 9 Points (1-9)
Note 3: The Definition of Crosstalk
1/2 1/6 2/3 1/2 1/3 1/6
1/6
A A' 1/6
1/3
1/2 1/2
B B'
2/3
184 gray level 184 gray level
0 gray level
Unit: percentage of dimension of display area
l LA-LA' l / LA x 100%= 1.5% max., L A and LB are brightness at location A and B
l LB-LB' l / LB x 100%= 1.5% max., L A' and LB' are brightness at location A' and B'
(C) Copyright AU Optronics, Inc. Page 11 of 29
January, 2003 All Rights Reserved. M170XW01 V.1 Ver0.5
No Reproduction and Redistribution Allowed.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
Note 4: The Definition of Flicker
Test Paterm: Subchecker Pattern
RGBRGB Gray Level = L127
RGBRGB
Gray Level = L0
RGBRGB
Method: Record dBV & DC value with (WESTAR)TRD-100
Amplitude
AC
DC
Time
AC Level(at 30 Hz)
Flicker (dB) = 20 log
DC Level
2.4: Pixel format image
Following figure shows the relationship of the input signals and LCD pixel format.
1 2 1279 1280
1st Line R G B R G B R GB R G B
768 Line R G B R G B R GB R G B
(C) Copyright AU Optronics, Inc. Page 12 of 29
January, 2003 All Rights Reserved. M170XW01 V.1 Ver0.5
No Reproduction and Redistribution Allowed.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
3.0 Electrical characteristics
3.1 Absolute Maximum Ratings
Absolute maximum ratings of the module is as following:
Item Symbol Min Max Unit Conditions
Logic/LCD Drive Voltage VIN +4.5 +5.5 [Volt]
CCFL Inrush current ICFLL - 20 [mA] Note 1
CCFL Current ICFL - 12.0 [mA] rms
Operating Temperature TOP 0 +50 [ oC] Note 2
Operating Humidity HOP 8 95 [%RH] Note 2
Storage Temperature TST -20 +60 [ oC] Note 2
Storage Humidity HST 8 95 [%RH] Note 2
Note 1: Duration=50 ms, Inverter: ACHME/AMN0732040 Rev. B
Note 2: Maximum Wet-Bulb should be 39 and No condensation
Relative Humidity %
Twb=39
T=40 ,H=95%
100
95
80
T=50 ,H=55%
60
T=60 ,H=39%
Storage
40 Operation range T=65 ,H=29%
range
20 Storage
range
5
0 -20 0 50 60
Temperature
(C) Copyright AU Optronics, Inc. Page 13 of 29
January, 2003 All Rights Reserved. M170XW01 V.1 Ver0.5
No Reproduction and Redistribution Allowed.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
3.2 Connectors
Physical interface is described as for the connector on module. These connectors are
capable of accommodating the following signals and will be following components.
Connector Name / Designation Interface Connector / Interface card
Manufacturer HIROSE or compatible
Type Part Number DF14H-20P-1.25H
Mating Housing Part Number DF14-20S-1.25C
Connector Name / Designation Lamp Connector / Backlight lamp
Manufacturer JST
Type Part Number BHSR-02VS-1
Mating Type Part Number SM02B-BHSS-1-TB
3.3 Signal Pin
Pin# Signal Name Pin# Signal Name
1 POWER, +5.0V 2 POWER, +5.0V
3 GND 4 GND
5 RxIN0- 6 RxIN0+
7 GND 8 RxIN1-
9 RxIN1+ 10 GND
11 RxIN2- 12 RxIN2+
13 GND 14 RxCLKIN-
15 RxCLKIN+ 16 GND
17 RxIN3- 18 RxIN3+
19 GND 20 NC (FOR AUO TEST)
(C) Copyright AU Optronics, Inc. Page 14 of 29
January, 2003 All Rights Reserved. M170XW01 V.1 Ver0.5
No Reproduction and Redistribution Allowed.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
3.4 Signal Description
PIN # SIGNAL NAME DESCRIPTION
1 POWER +5.0V Power supply
2 POWER +5.0V Power supply
3 GND Power Ground
4 GND Power Ground
5 RxIN0- Negative LVDS differential data input
6 RxIN0+ Positive LVDS differential data input
7 GND Power Ground
8 RxIN1- Negative LVDS differential data input
9 RxIN1+ Positive LVDS differential data input
10 GND Power Ground
11 RxIN2- Negative LVDS differential data input
12 RxIN2+ Positive LVDS differential data input
13 GND Power Ground
14 RxCLKIN- Negative LVDS differential clock input
15 RxCLKIN+ Positive LVDS differential clock input
16 GND Power Ground
17 RxIN3- Negative LVDS differential data input
18 RxIN3+ Positive LVDS differential data input
19 GND Power Ground
20 NC For AUO Test
Note 1: All GND (ground) pins should be connected together and to VSS which should also
be connected to the LCD's metal frame.
Note 2: All VCC (power input) pins should be connected together.
(C) Copyright AU Optronics, Inc. Page 15 of 29
January, 2003 All Rights Reserved. M170XW01 V.1 Ver0.5
No Reproduction and Redistribution Allowed.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
Note 3: The drawing of connector.
20 1
(C) Copyright AU Optronics, Inc. Page 16 of 29
January, 2003 All Rights Reserved. M170XW01 V.1 Ver0.5
No Reproduction and Redistribution Allowed.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
LVDS DATA Name Description
Display Timing: (DE mode)
DSP When the signal is high, the pixel data shall be valid to be
displayed
V-S Vertical Sync: Both Positive and Negative polarity are acceptable
Horizontal Sync: Both Positive and Negative polarity are
H-S
acceptable
8-bits input data format:
RxClkIN Vdiff=0V
RxIN0 G0 R5 R4 R3 R2 R1 R0
RxIN1 B1 B0 G5 G4 G3 G2 G1
RxIN2 DE VS HS B5 B4 B3 B2
RxIN3 RSV B7 B6 G7 G6 R7 R6
Previous Data for current Clk Next
cycle
Note: R/G/B data 7:MSB, R/G/B data 0:LSB
(C) Copyright AU Optronics, Inc. Page 17 of 29
January, 2003 All Rights Reserved. M170XW01 V.1 Ver0.5
No Reproduction and Redistribution Allowed.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
3.5 Interface Timings
3.5.1 Timing Characteristics
Item Symbol Min Typ Max Unit
Data CLK Tclk 45 64 81 MHz
Period Th 1330 1350 1440 Tclk
H-section
Display Area Tdisp(h) 1280 1280 1280 Tclk
Period Tv 777 790 860 Th
V-section
Display Area Tdisp(v) 768 768 768 Th
Frame Rate F 47 60 75 Hz
Note: DE mode only.
(C) Copyright AU Optronics, Inc. Page 18 of 29
January, 2003 All Rights Reserved. M170XW01 V.1 Ver0.5
No Reproduction and Redistribution Allowed.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
3.5.2 Timing Definition
CLK
DE
DE
Tclk
Tblk(v)
Th
Tv
Tdisp(h) Th
Tdisp(v)
Tblk(h)
(C) Copyright AU Optronics, Inc. Page 19 of 29
January, 2003 All Rights Reserved. M170XW01 V.1 Ver0.5
No Reproduction and Redistribution Allowed.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
3.6 Power Consumption
Symbol Parameter Min Typ Max Unit Condition
VDD Logic/LCD Drive Voltage 4.5 5 5.5 [Volt]
IDD VDD current - 950 1200 [mA] Vin=5V, All White Pattern
Irush LCD Inrush Current - - 3.0 [A] Note
PDD VDD Power - 4.75 6.6 [Watt] Vin=5V, All White Pattern
Allowable Logic/LCD [mV]
VDDrp - - 100
Drive Ripple Voltage p-p
Note: Measurement conditions:
+5.0V Q3
AO6402
D6 F1
D5
D2 S
VCC
D1
R1 (LCD Module Input)
G
47K
C1
1uF/16V
D1
D2
D5
D6
(High to Low)
Control Signal Q3
R2 AO6402
G
SW
1K
S
C3
+12.0V
VR1 0.01uF/25V
47K
C2
1uF/25V
90% 5.0V
10%
0V
470 us
Vin rising time
(C) Copyright AU Optronics, Inc. Page 20 of 29
January, 2003 All Rights Reserved. M170XW01 V.1 Ver0.5
No Reproduction and Redistribution Allowed.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
3.7 Power ON/OFF Sequence
Vin and lamp power on/off sequence are as follows. The timing parameters of interface signal are
shown in the table below.
90% 90%
Vin 10% 10% 10%
0V
T1 T2 T5 T6 T7
Signal
0V
T3 T4
Lamp
0V
Values
Symbol Unit
Min Typ Max
T1 0.5 - 10 [ms]
T2 0.5 25 50 [ms]
T3 200 - - [ms]
T4 200 - - [ms]
T5 0.5 16 50 [ms]
T6 0.5 - 10 [ms]
T7 1000 - - [ms]
(C) Copyright AU Optronics, Inc. Page 21 of 29
January, 2003 All Rights Reserved. M170XW01 V.1 Ver0.5
No Reproduction and Redistribution Allowed.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
4.0 Backlight Characteristics
4.1 Signal for Lamp connector
Pin # Signal Name
1 Lamp High Voltage
2 Lamp Low Voltage
4.2 Parameter guideline for CCFL Inverter
Symbol Parameter Min Typ Max Unit Condition
ISCFL CCFL standard current 10.5 11.0 11.5 [mA] rms (Ta=25oC)
IRCFL CCFL operation range 5.5 11.0 12.0 [mA] rms (Ta=25oC)
ICFL CCFL Inrush current - - 20 [mA] Note 1
FCFL CCFL Frequency 40 50 60 [KHz] (Ta=25oC) Note 2
ViCFL
CCFL Ignition Voltage 1650 - - [Volt] rms (Ta=0oC) Note 3
o
(0 C)
ViCF
CCFL Ignition Voltage 1250 - - [Volt] rms (Ta=25oC) Note 3
o
(25 C)
TCFL CCFL Dark start time - - 0.5 sec (Ta=25oC)
560 680
VCFL CCFL Discharge Voltage - [Volt] rms (Ta=25oC) Note 4
(@11mA) (@5.5mA)
o
PCFL CCFL Power consumption - 24.6 28 [Watt] (Ta=25 C) Note 5
LTCFL CCFL life Time 25,000 35,000 - [Hour] Note 6
Note 1: Duration=50 ms, Inverter: ACHME/AMN0732040 Rev. B
Note 2: CCFL Frequency should be carefully determined to avoid interference between
inverter and TFT LCD
Note 3: CCFL inverter should be able to give out a power that has a generating capacity of
over 1650 voltage. Lamp units need 1650 voltage minimum for ignition
Note 4: The variance of CCFL discharge voltage is 10%.
Note 5: CCFL power consumption shown above excluding loss of inverter. CCFL current is
the typical value for reference.
Note 6: CCFL life time is determined as the time at which brightness of lamp is 50%
compared to that of initial value at the typical lamp current on condition of continuous
operating at 25 2 .
(C) Copyright AU Optronics, Inc. Page 22 of 29
January, 2003 All Rights Reserved. M170XW01 V.1 Ver0.5
No Reproduction and Redistribution Allowed.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
5.0 Vibrations, Shock, and Drop
5.1 Vibration & Shock
Frequency: 10 - 200Hz
Sweep: 30 Minutes each Axis (X, Y, Z)
Acceleration: 1.5G (10~200Hz P- P)
Test method:
Acceleration (G) 1.5
Frequency (Hz) 10~200~10
Active time (min) 30
5.2 Shock Test Spec:
Acceleration (G) 50
Active time 20
Wave form half-sin
Times 1
Direction: X , Y, Z
5.3 Drop test
Package test: The drop height is 60 cm.
(C) Copyright AU Optronics, Inc. Page 23 of 29
January, 2003 All Rights Reserved. M170XW01 V.1 Ver0.5
No Reproduction and Redistribution Allowed.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
6.0 Environment
The display module will meet the provision of this specification during operating condition
or after storage or shipment condition specified below. Operation at 10% beyond the
specified range will not cause physical damage to the unit.
6.1 Temperature and Humidity
6.1.1 Operating Conditions
The display module operates error free, when operated under the following conditions;
Temperature 0 0C to 50 0C
Relative Humidity 8% to 95%
0
Wet Bulb Temperature 39.0 C
6.1.2 Shipping Conditions
The display module operates error free, after the following conditions;
Temperature -20 0C to 60 0C
Relative Humidity 8% to 95%
Wet Bulb Temperature 39.0 0C
6.2 Atmospheric Pressure
The display assembly is capable of being operated without affecting its operations over the
pressure range as following specified;
Pressure Note
Maximum Pressure 1040hPa 0m = sea level
Minimum Pressure 674hPa 3048m = 10.000 feet
Note: Non-operation attitude limit of this display module = 30,000 feet. = 9145 m.
(C) Copyright AU Optronics, Inc. Page 24 of 29
January, 2003 All Rights Reserved. M170XW01 V.1 Ver0.5
No Reproduction and Redistribution Allowed.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
6.3 Thermal Shock
The display module will not sustain damage after being subjected to 100 cycles of rapid
temperature change. A cycle of rapid temperature change consists of varying the
0 0
temperature from -20 C to 60 C, and back again.
Thermal shock cycle -20 0C for 30min
60 0C for 30min
Power is not applied during the test. After temperature cycling, the unit is placed in normal
room ambient for at least 4 hours before powering on.
7.0 Reliability
This display module and the packaging of that will comply following standards.
7.1 Failure Criteria
The display assembly will be considered as failing unit when it no longer meets any of the
requirements stated in this specification. Only as for maximum white luminance, following
criteria is applicable.
2
Note: Maximum white Luminance shall be 225 cd/m or more.
7.2 Failure Rate
The average failure rate of the display module (from first power-on cycle till 1,000 hours
later) will not exceed 1.0%. The average failure rate of the display module from 1,000 hours
until 16,000 hours will not exceed 0.7% per 1000 hours.
7.2.1 Usage
The assumed usage for the above criteria is:
220 power-on hours per month
500 power on/off cycles per month
Maximum brightness setting
Operation to be within office environment (25 0C typical)
(C) Copyright AU Optronics, Inc. Page 25 of 29
January, 2003 All Rights Reserved. M170XW01 V.1 Ver0.5
No Reproduction and Redistribution Allowed.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
7.3 ON/OFF Cycle
The display module will be capable of being operated over the following ON/OFF Cycles.
ON/OFF Value Cycles
+Vin and CCFL power 30,000 10 seconds on / 10 seconds off
8.0 Safety
8.1 Sharp Edge Requirements
There will be no sharp edges or comers on the display assembly that could cause injury.
8.2 Materials
8.2.1 Toxicity
There will be no carcinogenic materials used anywhere in the display module. If toxic
materials are used, they will be reviewed and approved by the responsible AU
Toxicologist.
8.2.2 Flammability
All components including electrical components that do not meet the flammability grade
UL94-V1 in the module will complete the flammability rating exception approval process.
The printed circuit board will be made from material rated 94-V1 or better. The actual
UL flammability rating will be printed on the printed circuit board.
8.3 Capacitors
If any polarized capacitors are used in the display assembly, provisions will be made to
keep them from being inserted backwards.
(C) Copyright AU Optronics, Inc. Page 26 of 29
January, 2003 All Rights Reserved. M170XW01 V.1 Ver0.5
No Reproduction and Redistribution Allowed.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
9.0 Other requirements
9.1 National Test Lab Requirement
The display module will satisfy all requirements for compliance to
UL 1950, First Edition U.S.A. Information Technology Equipment
CSA C22.2 No.950-M89 Canada, Information Technology Equipment
EEC 950 International, Information Technology Equipment
EN 60 950 International, Information Processing Equipment
(European Norm for IEC950)
9.2 Label
9.2.1 Product label
(C) Copyright AU Optronics, Inc. Page 27 of 29
January, 2003 All Rights Reserved. M170XW01 V.1 Ver0.5
No Reproduction and Redistribution Allowed.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
10.0 Mechanical Characteristics
Global LCD Panel Exchange Center
www.panelook.com
(C) Copyright AU Optronics, Inc. Page 28 of 29
January, 2003 All Rights Reserved. M170XW01 V.1 Ver0.5
No Reproduction and Redistribution Allowed.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
M170XW01 V.1 Ver0.5
Page 29 of 29
No Reproduction and Redistribution Allowed.
January, 2003 All Rights Reserved.
(C) Copyright AU Optronics, Inc.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com