Text preview for : Panel_AUO_B173RTN01-2_0_[DS].pdf part of . Various Panel AUO B173RTN01-2 0 [DS] . Various LCD Panels Panel_AUO_B173RTN01-2_0_[DS].pdf
Back to : Panel_AUO_B173RTN01-2_0_[ | Home
Global LCD Panel Exchange Center www.panelook.com
Product Specification
AU OPTRONICS CORPORATION
( ) Preliminary Specifications
( V ) Final Specifications
Module 17.3"(17.26) HD+ 16:9 Color TFT-LCD with LED Backlight design
Model Name B173RTN01.2 (HW:0A)
Note ( ) LED Backlight with driving circuit design
Customer Date Approved by Date
ASUS 02/13/2012 Claire Yu 02/13/2012
Checked &
Date Prepared by Date
Approved by
Claire Yu 02/13/2012
Note: This Specification is subject to change without NBBU Marketing Division /
notice. AU Optronics corporation
%571 'RFXPHQW 9HUVLRQ 1 of 30
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
Product Specification
AU OPTRONICS CORPORATION
Contents
1. Handling Precautions .......................................................................................4
2. General Description ..........................................................................................5
2.1 General Specification .........................................................................................................5
2.2 Optical Characteristics .......................................................................................................6
3. Functional Block Diagram .............................................................................. 11
4. Absolute Maximum Ratings ........................................................................... 12
4.1 Absolute Ratings of TFT LCD Module ..............................................................................12
4.2 Absolute Ratings of Environment .....................................................................................12
5. Electrical characteristics ................................................................................ 13
5.1 TFT LCD Module..............................................................................................................13
5.2 Backlight Unit ...................................................................................................................15
5.2.1 LED characteristics .......................................................................................................15
6. Signal Characteristic ...................................................................................... 16
6.1 Pixel Format Image ..........................................................................................................16
6.2 The input data format .......................................................................................................17
6.3 Integration Interface and Pin Assignment.........................................................................18
6.3.1 Connector Description...................................................................................................18
6.4 Interface Timing................................................................................................................20
7. Vibration and Shock Test ............................................................................... 22
7.1 Vibration Test....................................................................................................................22
7.2 Shock Test Spec:..............................................................................................................22
7.3. Reliability .........................................................................................................................22
8. Mechanical Characteristics ............................................................................ 23
8.1 LCM Outline Dimension ...................................................................................................23
8.2 Screw Hole Depth and Center Position ............................................................................25
9. Shipping and Package .................................................................................... 26
9.1 Shipping Label Format .....................................................................................................26
9.2. Carton package ...............................................................................................................27
9.3 Shipping package of palletizing sequence .......................................................................27
10. Appendix: EDID description ......................................................................... 28
%571 'RFXPHQW 9HUVLRQ 2 of 30
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
Product Specification
AU OPTRONICS CORPORATION
Record of Revision
Version and Date Page Old description New Description Remark
0.0 2011/12/07 All Preliminary Edition for Customer
0.1 2011/12/12 29-31 Update EDID
0.2 2012/2/13 1 (1) Final version
29-31 (2) Update EDID for WWAN solution
%571 'RFXPHQW 9HUVLRQ 3 of 30
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
Product Specification
AU OPTRONICS CORPORATION
1. Handling Precautions
1) Since front polarizer is easily damaged, pay attention not to scratch it.
2) Be sure to turn off power supply when inserting or disconnecting from input connector.
3) Wipe off water drop immediately. Long contact with water may cause discoloration or
spots.
4) When the panel surface is soiled, wipe it with absorbent cotton or other soft cloth.
5) Since the panel is made of glass, it may break or crack if dropped or bumped on hard
surface.
6) Since CMOS LSI is used in this module, take care of static electricity and insure human
earth when handling.
7) Do not open nor modify the Module Assembly.
8) Do not press the reflector sheet at the back of the module to any directions.
9) At the insertion or removal of the Signal Interface Connector, be sure not to rotate nor
tilt the Interface Connector of the TFT Module.
11) After installation of the TFT Module into an enclosure (Notebook PC Bezel, for
example), do not twist nor bend the TFT Module even momentary. At designing the
enclosure, it should be taken into consideration that no bending/twisting forces are
applied to the TFT Module from outside. Otherwise the TFT Module may be damaged.
12) Small amount of materials having no flammability grade is used in the LCD module. The LCD
module should be supplied by power complied with requirements of Limited Power Source
(IEC60950 or UL1950), or be applied exemption.
13) Disconnecting power supply before handling LCD modules, it can prevent electric shock, DO
NOT TOUCH the electrode parts, cables, connectors and LED circuit part of TFT module that
a LED light bar build in as a light source of back light unit. It can prevent electros tic
breakdown.
%571 'RFXPHQW 9HUVLRQ 4 of 30
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
Product Specification
AU OPTRONICS CORPORATION
2. General Description
B173RTN01.2 is a Color Active Matrix Liquid Crystal Display composed of a TFT LCD panel, a
driver circuit, and LED backlight system. The screen format is intended to support the 16:9 HD+
(1600(H) x 900(V)) screen and 262k colors (RGB 6-bits data driver) with LED backlight driving
circuit. All input signals are LVDS interface compatible.
B173RTN01.2 is designed for a display unit of notebook style personal computer and industrial
machine.
2.1 General Specification
The following items are characteristics summary on the table at 25 condition:
Items Unit Specifications
Screen Diagonal [mm] 17.3"(17.26)
Active Area [mm] 382.08 X 214.92
Pixels H x V 1600x3(RGB) x 900
Pixel Pitch [mm] 0.2388X0.2388
Pixel Format R.G.B. Vertical Stripe
Display Mode Normally White
2 200 typ. (5 points average)
White Luminance [cd/m ]
170 min. (5 points average)
Luminance Uniformity 1.25 max. (5 points)
Contrast Ratio 400:1 typ
Response Time [ms] 8 typ/16max
Nominal Input Voltage VDD [Volt] +3.3 typ.
Power Consumption [Watt] 6.5 max. (Include Logic and Blu power)
Weight [Grams] 570 max.
Physical Size Min. Typ. Max.
Without inverter, bracket. Length 397.6 398.1 398.6
[mm]
Width 232.3 232.8 233.3
Thickness - - 5.8
Electrical Interface 2 channel LVDS
Glass Thickness [mm] 0.5
Surface Treatment AG, Hardness 3H
Support Color 262K colors ( RGB 6-bit )
Temperature Range
o
Operating [ C] 0 to +50
o
Storage (Non-Operating) [ C] -20 to +60
RoHS Compliance RoHS Compliance
%571 'RFXPHQW 9HUVLRQ 5 of 30
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
Product Specification
AU OPTRONICS CORPORATION
2.2 Optical Characteristics
The optical characteristics are measured under stable conditions at 25 (Room Temperature) :
Item Symbol Conditions Min. Typ. Max. Unit Note
White Luminance 5 points average 2
170 200 - cd/m 1, 4, 5.
ILED=20mA
R Horizontal (Right) 70 -
L CR = 10 (Left) degree
70 -
Viewing Angle 4, 9
H Vertical (Upper) 60 -
L CR = 10 (Lower)
60 -
Luminance Uniformity 5P
5 Points - - 1.25 1, 3, 4
Luminance Uniformity 13P
13 Points - - 1.60 2, 3, 4
Contrast Ratio CR 300 400 - 4, 6
Cross talk % 4 4, 7
Response Time TRT Rising + Falling - 8 16
Rx 0.590 0.620 0.650
Red
Ry 0.320 0.350 0.380
Gx 0.285 0.315 0.345
Green
Color / Gy 0.585 0.615 0.645
Chromaticity
Coodinates Bx CIE 1931 0.120 0.150 0.180 4
Blue
By 0.083 0.113 0.143
Wx 0.283 0.313 0.343
White
Wy 0.299 0.329 0.359
NTSC % - 60 -
%571 'RFXPHQW 9HUVLRQ 6 of 30
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
Product Specification
AU OPTRONICS CORPORATION
Note 1: 5 points position (Ref: Active area)
W
W /4 W /4 W /4 W /4
H /4
1 2
H /4
H 3
H /4
4 5
H /4
Note 2: 13 points position (Ref: Active area)
W
W /4 W /4 W /4 W /4
10 10
10
1 2 3
H /4
4 5
H /4
H 6 7 8
H /4
9 10
H /4 11 12 13
10
Note 3: The luminance uniformity of 5 or13 points is defined by dividing the maximum luminance values by the
minimum test point luminance
0D[LPXP %ULJKWQHVV RI ILYH SRLQWV
: =
0LQLPXP %ULJKWQHVV RI ILYH SRLQWV
0D[LPXP %ULJKWQHVV RI WKLUWHHQ SRLQWV
: =
0LQLPXP %ULJKWQHVV RI WKLUWHHQ SRLQWV
Note 4: Measurement method
The LCD module should be stabilized at given temperature for 30 minutes to avoid abrupt temperature change
during measuring. In order to stabilize the luminance, the measurement should be executed after lighting Backlight
%571 'RFXPHQW 9HUVLRQ 7 of 30
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
Product Specification
AU OPTRONICS CORPORATION
for 30 minutes in a stable, windless and dark room, and it should be measured in the center of screen.
3KRWR GHWHFWRU
)LHOG
FP
/&' 3DQHO 7)7/&' 0RGXOH
&HQWHU RI WKH VFUHHQ
Note 5 Definition of Average Luminance of White (YL):
Measure the luminance of gray level 63 at 5 points YL = [L (1)+ L (2)+ L (3)+ L (4)+ L (5)] / 5
L (x) is corresponding to the luminance of the point X at Figure in Note (1).
Note 6 Definition of contrast ratio:
Contrast ratio is calculated with the following formula.
%ULJKWQHVV RQ WKH