Text preview for : HP 8663A Operation.pdf part of Agilent HP 8663A Operation Agilent HP 8663A Operation.pdf
Back to : HP 8663A Operation.pdf | Home
Errata
Title & Document Type: 8663A Signal Generator Operation and Calibration Manual
Manual Part Number: 08663-90069
Revision Date: August 1, 1991
HP References in this Manual
This manual may contain references to HP or Hewlett-Packard. Please note that Hewlett-
Packard's former test and measurement, semiconductor products and chemical analysis
businesses are now part of Agilent Technologies. We have made no changes to this
manual copy. The HP XXXX referred to in this document is now the Agilent XXXX.
For example, model number HP8648A is now model number Agilent 8648A.
About this Manual
We've added this manual to the Agilent website in an effort to help you support your
product. This manual provides the best information we could find. It may be incomplete
or contain dated information, and the scan quality may not be ideal. If we find a better
copy in the future, we will add it to the Agilent website.
Support for Your Product
Agilent no longer sells or supports this product. You will find any other available
product information on the Agilent Test & Measurement website:
www.tm.agilent.com
Search for the model number of this product, and the resulting product page will guide
you to any available information. Our service centers may be able to perform calibration
if no repair parts are needed, but no other support from Agilent is available.
HP 8663A
SYNTHESIZED SIGNAL GENERATOR
Including Options 001, 002, 4%003
Operation and Calibration Manual
SERIAL NUMBERS
This mmml applies d,iwtly to ktnunents with
Eaial rur&.ers preflxe&
2234A to 2927A and all MAJOR changes that apply to your instrument
wv.12AUG91
For additional impmtant infomation abmt mid
mmbm, refer to "DZTRLiiXTS CO\-ERED BY
THIS MANUAL* in Section I.
Second Edition
This material may be reproduced by or for the tI,S,
Cmwrnment pursuant to the Copyright License vr-
der the clause at DFARS 52.227-7013 (APR 1966).
Copyrigh!@HEWLETT-PACKARD COMPANY 1982
EAST 24001 MISSION AVENUE, TAF G34, SPOKANE, WASHINGTON, U.S.A. 99220
HEWLETT
K-!/a PACKARD
Documentation Update Service Packet
HP 8663A Operation and Calibration Manual
rev12 AUG91
HP 8663A
SYNTHESIZED SIGNAL GENERATOR
Including Options 001, 002, & 003
Operation and Calibration Manual
SERIAL NUMBERS
Tb,ismanual appliesdirectly to instnnnentswith
erGI numbersprefixed;
2234Ato 2927Aandall MAJORchanges applyto your instxumenL.
that
i-w.12MAR90
For additionalimpox-tant
informationabout swirl
munbws,refer to "INSTRUMENTS COVERED BY
THIS MANUAL" in Section 1.
Second
Edition
This material maybe reproduced or for the US
by
Government pursuantto the CopyrightLicemeun.
dw the clause WARS 52.227-7013 19881.
at W'R
Copyright@HEWLETT-PACKARD COMPANY 1962
EAST 24001 MISSION AVENUE, TAF C-34, SPOKANE, WASHINGTON, U.S.A. 99220
H.EWLETT
PACKARD
Model 8663A
Section 1
GENERAL INFORMATION
l-l. INTRODUCTION Safety information for installation and operation is
fo"nd in appropriate places throughout this manual.
This manual contains information required to instill,
operate, test, adjust, and service the Hewlett-Packard l-4. INSTRUMENTS COVERED BY MANUAL
Model 8663A Signal Generator. The Model 8663A
will generally be referred to as the signal generator 4ttached to the instrument is a serial number plati.
throughout this manual. The serial number is in the form: OOOOAOOOOO. The
serial number is composed of two parts; the first four
The HP 8663A Operating and Service manual is digits and the letter are the serial number prefix and
composed of an Operation and Calibration Manual the last five digits are the suffix. The prefix is the
and a three volume service manual. The Operation and same for all identical instnnnents; it changes only
Calibration Manual contains the following sections: when a change is made to the instrwnent, The suffix,
1. General Information however, is assigned seq"entially and is different for
2. Installation each instrument. The contents of this manual apply
3. Operation to instnxnenta with the serial number prefix(w) listed
4. Performance Tests unde? SERIAL NUMBERS on the title page.
5. 4djustments Manual Updates. An instrument manufactured aftir
The Service Manual (Volumes 1, 2 and 3) contain the the printing of this manual may have a serial prefix
following Sections: that is not listed on the title page. An unlisted serial
prefix number indicates that the instrument differs in
6. Replaceable Parts some way from those documented in this man"a1.
7. Manual Changes
8. Service A "MANUAL UPDATES" packet is shipped with the
man"a1 when neceswy tn provide yo" with the most
The HP part number for the Operation and C&bra-
current information available at the time of shipment.
tion Manual is shown cm the title page of this manwd.
These packets consist of replacement and addition
Part number for the Service Manual are shown on
pages which should be incorporated into the rrmnual
the title pages of Volumes 1, 2 and 3 of the Service
to bring it "p to date.
Manual.
Hewlett-Packard offers a Document Wpdate Service
that will provide you with f"rther updates as they
l-2. SPECl!=lCATlONS become available.
Instrument specifications are listed in Table l-1. These If you operate or service instruments of different
specifications are the performance standards or limits serial prefixes, we strongly recommend that you join
against which the instrwoant can be tested. Supple- this service immediately to ensure that your manual
mental characteristics are not specifications but are is kept current. For tnore information, refer to the
typical characteristics included as additional informa- Documentition Update Service reply card included
tion for the user. with this manual or contact!
l-3* SAFETY CONSIDERATIONS Technical Writing Department
Spokane Division
This product is a Safety Class I instnnnent (provided Hewlett-Packard Company
with a protective earth terminal), The signal generator East 24001 Mission - TAF C-34
and all related doc"mentation must be reviewed for Spokane, Washin@on, W.S.A. 99220
familiarization with safety markings and instructions Telephone (509) 922.4001
before operation. Refer to the Safety Considerations
page found at the beginning of this manual for a
s"mmary of general safety information.