Text preview for : 5990-4391EN E5061B Network Analyzer - Configuration Guide c20140725 [17].pdf part of Agilent 5990-4391EN E5061B Network Analyzer - Configuration Guide c20140725 [17] Agilent 5990-4391EN E5061B Network Analyzer - Configuration Guide c20140725 [17].pdf



Back to : 5990-4391EN E5061B Networ | Home

Keysight E5061B
Network Analyzer




Coniguration Guide
02 | Keysight | E5061B Network Analyzer - Coniguration Guide



Ordering guide
The following steps will guide you through coniguring your E5061B.


Standard furnished item 1
Description Additional information
Installation guide Contains the information necessary to start up with the E5061B.
CD ROM IO libraries
Power cable
Certiicate of calibration



Step 1. Choose test set option (must choose one of the nine test set options.)
Option No. Description
50 RF NA options
E5061B-115 Transmission/Relection test set, 100 kHz to 1.5 GHz, 50 system impedance
E5061B-215 S-parameter test set, 100 kHz to 1.5 GHz, 50 system impedance
E5061B-135 Transmission/Relection test set, 100 kHz to 3 GHz, 50 system impedance
E5061B-235 S-parameter test set, 100 kHz to 3GHz, 50 system impedance
75 RF NA options
E5061B-117 Transmission/Relection test set, 100 kHz to 1.5 GHz, 75 system impedance
E5061B-217 S-parameter test set, 100 kHz to 1.5 GHz, 75 system impedance
E5061B-137 Transmission/Relection test set, 100 kHz to 3 GHz, 75 system impedance
E5061B-237 S-parameter test set, 100 kHz to 3GHz, 75 system impedance
LF-RF NA option
E5061B-3L5 2 LF-RF network analyzer with DC bias source, 5 Hz to 3 GHz



Step 2. Choose impedance analysis option
(for E5061B-3L5 LF-RF network analyzer. If not required, go to step 3.)
Option No. Description
Software option
E5061B-005 3, 4 Impedance analysis for E5061B-3L5 LF-RF network analyzer
Accessory
E5061B-720 4, 5 Add 50 resistor set




1. Keyboard and mouse are not furnished as standard. Refer to "Step 6. accessory option" for the selection of these items.
2. The E5061B-3L5 includes the 50 ohm S-parameter test set (5 Hz to 3 GHz), and the gain-phase test port (5 Hz to 30 MHz)
3. This option is not applicable for the E5061B RF NA options 1x5/2x5/1x7/2x7.
4. Refer to "Upgrade Kit" section for retroit information on the above option.
5. For calibration at test ixtures. Required for the gain-phase series-thru method.
03 | Keysight | E5061B Network Analyzer - Coniguration Guide



Step 3. Choose hardware option (If not required, go to step 4)
Option No. Description
E5061B-1E5 1 High stability time base


Step 4. Choose hard disk drive option 2
Option No. Description
E5061B-020 Standard hard disk drive


Step 5. Choose software option (If not required, go to step 6)
Option No. Description
E5061B-010 3 Time domain/fault location analysis


Step 6. Choose accessory option (If not required, go to step 7)
Option No. Description
E5061B-810 Add keyboard
E5061B-820 Add mouse
E5061B-1CM Rack mount Kit
E5061B-1CN Front Handle Kit
E5061B-1CP Rack mount and front handle kit


Step 7. Choose calibration option (if not required, go to step 8)
Option No. Description
E5061B-1A7 ISO 17025 compliant calibration
E5061B-A6J ANSI Z540 compliant calibration


Step 8. Choose your warranty service (optional)
Option No. Description
R-50C-011-3 Keysight Calibration - 3 years
R-50C-011-5 Keysight Calibration - 5 years
R-50C-021-3 ANSI Z540-1-1994 Calibration - 3 years
R-50C-021-5 ANSI Z540-1-1994 Calibration - 5 years
R-51B-001-5C Return ro Keysight warranty - 5 years




1. Refer to "Hardware upgrade" section for retroit information on the above options.
2. Option 020 is the only hard disk option for the E5061B. Must choose this option when ordering the E5061B.
3. Refer to "Software upgrade" section for retroit information on the above option.
04 | Keysight | E5061B Network Analyzer - Coniguration Guide



Test accessories and calibration kits
Test accessories and calibration kits that can be used with the E5061B are listed in this section. A complete line of test
accessories and calibration kits can be found at the Keysight RF and Microwave Test Accessories Web site:
www.Keysight.com/ind/accessories



Test accessories
Test accessories such as test port cable are necessary for a complete measurement system using the E5061B. Order test
accessories in accordance with the desired measurement system.

Calibration kits
Calibration is an accuracy enhancement procedure that effectively reduces the system errors that cause uncertainty in
network measurement. Calibration kit is necessary to perform the calibration.