English _ 2012-10-26 _ PDF 301 KB 5991-1222EN c20141027 [2].pdf part of Agilent English 2012-10-26 PDF 301 KB 5991-1222EN c20141027 [2] English _ 2012-10-26 _ PDF 301 KB 5991-1222EN c20141027 [2].pdf, Agilent English _ 2012-10-26 _ PDF 301 KB 5991-1222EN c20141027 [2].pdf text manual preview

Text preview for : English _ 2012-10-26 _ PDF 301 KB 5991-1222EN c20141027 [2].pdf part of Agilent English 2012-10-26 PDF 301 KB 5991-1222EN c20141027 [2] Agilent English _ 2012-10-26 _ PDF 301 KB 5991-1222EN c20141027 [2].pdf

Back to : English _ 2012-10-26 _ PD | Home

Demo Guide
IniniiVision 4000 X-Series Oscilloscope
Oscilloscope Experience Redeined ~ Experience the Speed, Usability, and Integration
IniniiVision 4000 X-Series provides three convenient ways to access menus and setups of the oscilloscope: capacitive touch operation, front panel operation, and pull down operation.

Experience the usability: Getting familiarized with the capacitive touch interface on the IniniiVision 4000 X-Series

1. Turn on your 4000 X-Series. 11. Touch the Blue Box of the side bar and then select IniniiVision 4000 X-Series Keysight Technologies, Inc. and partner
2. Push [Help] button then touch Auto Demo. "Measurements." demonstration units have a built-in Auto Demo to illustrate their compelling
3. Connect channel 1 probe to demo 1 and channel 2 probe to demo 2 12. Touch "+" to add measurements. Slide the scroll bar up and double features and beneits.
(shown in a diagram). touch "Maximum." 1. Push [Help] button then touch Auto Demo.
4. Touch Zone Trigger then Next. 13. Touch Freq (1) in the list of active measurements. Touch "Clear 2. Auto Demo provides following quick demonstrations:
5. Touch Exit and try it for yourself. Draw a zone, then select "Zone 1: Measurement" to delete the measurement.