Text preview for : N5221-90001 Data Sheet and Technical Specifications_252C N5221A and N5222A 2-Port and 4-Port PNA Net part of



| Home

Keysight 2-Port and
4-Port PNA Network
Analyzer
N5221A 10 MHz to 13.5 GHz
N5222A 10 MHz to 26.5 GHz




Data Sheet and
Technical
Specifications
Documentation Warranty
THE MATERIAL CONTAINED IN THIS DOCUMENT IS PROVIDED "AS IS," AND IS SUBJECT TO BEING
CHANGED, WITHOUT NOTICE, IN FUTURE EDITIONS. FURTHER, TO THE MAXIMUM EXTENT PERMITTED
BY APPLICABLE LAW, KEYSIGHT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED WITH
REGARD TO THIS MANUAL AND ANY INFORMATION CONTAINED HEREIN, INCLUDING BUT NOT LIMITED
TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
KEYSIGHT SHALL NOT BE LIABLE FOR ERRORS OR FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES IN
CONNECTION WITH THE FURNISHING, USE, OR PERFORMANCE OF THIS DOCUMENT OR ANY
INFORMATION CONTAINED HEREIN. SHOULD KEYSIGHT AND THE USER HAVE A SEPARATE WRITTEN
AGREEMENT WITH WARRANTY TERMS COVERING THE MATERIAL IN THIS DOCUMENT THAT CONFLICT
WITH THESE TERMS, THE WARRANTY TERMS IN THE SEPARATE AGREEMENT WILL CONTROL.



DFARS/Restricted Rights Notice
If software is for use in the performance of a U.S. Government prime contract or subcontract, Software is
delivered and licensed as "Commercial computer software" as defined in DFAR 252.227-7014 (June 1995),
or as a "commercial item" as defined in FAR 2.101(a) or as "Restricted computer software" as defined in FAR
52.227-19 (June 1987) or any equivalent agency regulation or contract clause. Use, duplication or
disclosure of Software is subject to Keysight Technologies' standard commercial license terms, and non-
DOD Departments and Agencies of the U.S. Government will receive no greater than Restricted Rights as
defined in FAR 52.227-19(c)(1-2) (June 1987). U.S. Government users will receive no greater than Limited
Rights as defined in FAR 52.227-14 (June 1987) or DFAR 252.227-7015 (b)(2) (November 1995), as
applicable in any technical data.




2
Definitions .............................................................................................................................................. 6

Corrected System Performance.................................................................................................................7
System Dynamic Range and Receiver Dynamic Range ...................................................................... 7
Table 1a. System Dynamic Range and Receiver Dynamic Range, N5221A, Option 200 or 400 .... 8
Table 1b. System Dynamic Range and Receiver Dynamic Range, N5222A, Option 200 or 400 .... 8
Table 2. System Dynamic Range at Test Port (dB) ............................................................................. 9
Table 3. Extended Dynamic Range at Direct Receiver Access Input (dB) - Specification ............... 9
Corrected System Performance, All Options.....................................................................................10
Table 4a. N5221A and N5222A with 85052B Calibration Kit - Specification ................................11
Table 4b. N5221A and N5222A with N4691B 2-Port Electronic Calibration Module ...................12
Table 4c. N5221A and N5222A with N4433A 4-Port Electronic Calibration Module ...................13

Uncorrected System Performance ......................................................................................................... 14
Table 5a. Error Terms (dB), All Ports, All Options - Specifications ..................................................14
Table 5b. Error Terms (dB), All Ports, All Options - Typical .............................................................14

Test Port Output ....................................................................................................................................... 15
Table 6. Frequency Information, All Options .....................................................................................15
Table 7a. Maximum Leveled Power (dBm) - Specification ...............................................................15
Table 7b. Maximum Leveled Power (dBm) - Typical.........................................................................16
Table 8. Power Level Accuracy (dB), All Options ..............................................................................16
Table 9a. Power Level Linearity (dB), All Options - Specification ....................................................16
Table 9b. Power Level Linearity (dB), All Options - Specification....................................................17
Table 10a. Power Sweep Range (dB), All Options - Specification...................................................17
Table 10b. Power Sweep Range (dB), All Options - Typical ............................................................17
Table 11. Nominal (Preset) Power (dBm) ..........................................................................................18
Table 12. Power Resolution and Maximum/Minimum Settable Power, All Options ......................18
Table 13. 2nd and 3rd Harmonics at Max Specified Power (dBc) All Options - Typical ...................18
Table 14. Non-Harmonic Spurs at Nominal Power (dBc), All Options - Typical ............................18
Table 15. Phase Noise (dBc/Hz), All Options - Typical .....................................................................19

Test Port Input .......................................................................................................................................... 20
Table 16. Test Port Noise Floor (dBm) @ 10 Hz IFBW, All Options ................................................20
Table 17. Direct Receiver Access Input Noise Floor (dBm), Options 201, 217, 219, 401, 417, 41920
Table 18a. 0.1 dB Receiver Compression at Test Port (dBm), Option 201, 217, 219, 401, 417, 419 -
Typical ...................................................................................................................................................21


3
Table 18b. Receiver Compression at Test Port Power - Specification ...........................................21
Table 18c. Receiver Compression at Test Port Power - Specification ............................................21
Table 19. Trace Noise Magnitude (dB rms) .......................................................................................22
Table 20. Trace Noise Phase (deg rms) .............................................................................................22
Table 21. Reference Level Magnitude, All Options - Specification .................................................22
Table 22. Stability, All Options - Typical ............................................................................................23
Table 23. Damage Input Level ............................................................................................................23

Dynamic Accuracy .................................................................................................................................... 24
Table 24. N5221A and N5222A Dynamic Accuracy .........................................................................24
Table 25. Group Delay - Typical .........................................................................................................27

General Information ................................................................................................................................. 28
Table 26. Miscellaneous Information .................................................................................................28
Table 27. Front Panel Information, All Options .................................................................................28
Table 28. Rear Panel Information, All Options ..................................................................................29
Table 29. Analyzer Dimensions and Weight ......................................................................................33
Regulatory and Environmental Information .......................................................................................33

Measurement Throughput Summary...................................................................................................... 34
Table 30a. Typical Cycle Time (ms) for Measurement Completion, All Models / Options .............34
Table 30b. N5221A Typical Cycle Time (ms) for Full-Span Measurement Completion................34
Table 30c. N5222A Typical Cycle Time (ms) for Full-Span Measurement Completion ................35
Table 31. Cycle Time vs. IF Bandwidth - Typical ...............................................................................35
Table 32. Cycle Time vs. Number of Points - Typical .......................................................................35
Table 33. Data Transfer Time (ms) - Typical ......................................................................................36

Specifications: Front-Panel Jumpers ..................................................................................................... 38
Table 34. Measurement Receiver Inputs (dBm)