Text preview for : E5071C-TDR Application Software Revision History FirmwareRevisionHistory_E5071C-opt-TDR [2].pdf part of
| Home
E5071C OPT TDR Network Analyzer Firmware Revision History
Rev. 20140314
Note:
The purpose of this document is to provide an overview of important changes that could affect a majority
of customers. If you have any concerns about a specific issue, contact your local Agilent representative.
Firmware for Windows 7
Revision B.xx.xx can be installed onto the E5071C with Windows 7 only.
Revision B.02.00 ... Released January 2014
1. Supports the E5071C with Windows 7.
Firmware for Windows XP
Revision A.xx.xx can be installed onto the E5071C with Windows XP only.
Revision A.01.57 ... Released January 2014
1. Added the function to avoid this firmware from being installed onto the E5071C with Windows 7.
Revision A.01.56 ... Released June 2012
1. Fixed Minor Bug..
Revision A.01.53 ... Released January 2012
1. Fixed Minor Bug.
Revision A.01.52 ... Released December 2011
1. Supports Windows 7.
Revision A.01.50 ... Released September 2011
1. Added Advanced Waveform Analysis.
2. Added Hot TDR option.
3. Added manual scale for Eye Diagram.
4. Added Cal status indicator.
Revision A.01.03 ... Released August 2011
1. Fixed problem on eye diagram when setting negative value for zero level.
2. Fixed minor bugs.
Revision A.01.02 ... Released July 2011
1. Height (dB) is deleted from the result.
2. TDR Mask Test - It is required to define the values of the Logic 1 Lv and Logic 0 Lv in the scale
tab for Mask.