Text preview for : HP 43961A USER.pdf part of Agilent HP 43961A USER Agilent HP 43961A USER.pdf
Back to : HP 43961A USER.pdf | Home
Agilent 43961A RF Impedance Test Kit
Notice
The information contained in this document is subject to change without
notice.
This document contains proprietary information that is protected by
copyright. All rights are reserved. No part of this document may be
photocopied, reproduced, or translated to another language without the
prior written consent of the Agilent Technologies.
Safety Summary
The following general safety precautions must be observed during all phases of
operation, service, and repair of this instrument.
The Agilent Technologies assumes no liability for the customer's failure to
comply with these requirements.
DO NOT Operate In An Explosive Atmosphere
Do not operate the instrument in the presence of flammable gasses or
fumes. Operation of any electrical instrument in such an environment
constitutes a safety hazard.
Keep Away From Live Circuits
Operating personnel must not remove instrument covers.
Warranty
This Agilent Technologies instrument product is warranted against defects in
material and workmanship for a period of three months from the date of
shipment. During the warranty period, Agilent Technologies will, at its option,
either repair or replace products which prove to be defective.
For warranty service or repair, this product must be returned to a service facility
designated by Agilent Technologies. Buyer shall prepay shipping charges to
Agilent Technologies and Agilent Technologies shall pay shipping charges to
return the product to Buyer. However, Buyer shall pay all shipping charges,
duties, and taxes for products returned to Agilent Technologies from another
country.
Agilent Part Number : 43961-90010
Printed: January 2000 (Third Edition)
PRINTED IN JAPAN
Limitation Of Warranty
The foregoing warranty shall not apply to defects resulting from improper or
inadequate maintenance by Buyer, Buyer-supplied software or interfacing,
unauthorized modification or misuse, operation outside of the environmental
specifications for the product, or improper site preparation or maintenance.
No other warranty is expressed or implied. Agilent Technologies specifically
disclaims the implied warranties of merchantability and fitness for a particular
purpose.
Exclusive Remedies
The remedies provided herein are buyer's sole and exclusive remedies. Agilent
Technologies shall not be liable for any direct, indirect, special, incidental, or
consequential damages, whether based on contract, tort, or any other legal
theory.
Contents
Table 1-1 shows the contents of the 43961A Impedance Test Kit.
Table 1-1. Contents of the 43961A
No. Description Qty. Agilent Part Number
1 Impedance Test Adapter 1 43961-61001
2 0 S Calibration Standard 1 04191-85302
3 0 calibration Standard 1 04191-85300
4 50 calibration Standard 1 04191-85301
5 N(m)-N(m) cable 1 41951-61602
1 1 43961-60001
Carrying Case
1 1 43961-90000
Notice
1 This part is not shown in above.
Operation
The 43961A has been designed to operate specifically with the 4396A/B and
4395A Network/Spectrum/Impedance Analyzer.
To operate the 43961A with the 4396A
see 4396A option 010 Operating Handbook (Agilent PN: 04396-90006 written
in English or Agilent PN: 04396-97006 written in Japanese)
To operate the 43961A with the 4396B
see 4396B option 010 Operating Handbook (Agilent PN: 04396-90036 written
in English or Agilent PN: 04396-97036 written in Japanese)
To operate the 43961A with the 4395A
see 4395A Operation Manual (Agilent PN: 04395-90010 written in English or
Agilent PN: 04395-97010 written in Japanese)
Service
See 43961A Service Manual (Agilent PN 43961-90030) for the 43961A service
information.