Text preview for : N5245-90008 Data Sheet and Technical Specifications_252C N5244A and N5245A 2-Port and 4-Port PNA-X N part of
| Home
Keysight 2-Port and 4-Port
PNA-X Network Analyzer
N5244A - 10 MHz to 43.5 GHz
N5245A - 10 MHz to 50.0 GHz
Data Sheet and
Technical
Specifications
Documentation Warranty
THE MATERIAL CONTAINED IN THIS DOCUMENT IS PROVIDED "AS IS," AND IS SUBJECT TO BEING
CHANGED, WITHOUT NOTICE, IN FUTURE EDITIONS. FURTHER, TO THE MAXIMUM EXTENT PERMITTED BY
APPLICABLE LAW, KEYSIGHT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED WITH REGARD
TO THIS MANUAL AND ANY INFORMATION CONTAINED HEREIN, INCLUDING BUT NOT LIMITED TO THE
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. KEYSIGHT
SHALL NOT BE LIABLE FOR ERRORS OR FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES IN CONNECTION
WITH THE FURNISHING, USE, OR PERFORMANCE OF THIS DOCUMENT OR ANY INFORMATION CONTAINED
HEREIN. SHOULD KEYSIGHT AND THE USER HAVE A SEPARATE WRITTEN AGREEMENT WITH WARRANTY
TERMS COVERING THE MATERIAL IN THIS DOCUMENT THAT CONFLICT WITH THESE TERMS, THE
WARRANTY TERMS IN THE SEPARATE AGREEMENT WILL CONTROL.
DFARS/Restricted Rights Notice
If software is for use in the performance of a U.S. Government prime contract or subcontract, Software is
delivered and licensed as "Commercial computer software" as defined in DFAR 252.227-7014 (June 1995), or
as a "commercial item" as defined in FAR 2.101(a) or as "Restricted computer software" as defined in FAR
52.227-19 (June 1987) or any equivalent agency regulation or contract clause. Use, duplication or disclosure
of Software is subject to Keysight Technologies' standard commercial license terms, and non-DOD
Departments and Agencies of the U.S. Government will receive no greater than Restricted Rights as defined in
FAR 52.227-19(c)(1-2) (June 1987). U.S. Government users will receive no greater than Limited Rights as
defined in FAR 52.227-14 (June 1987) or DFAR 252.227-7015 (b)(2) (November 1995), as applicable in any
technical data.
2
Contents
Definitions .......................................................................................................... 7
Corrected System Performance ....................................................................... 8
System Dynamic Range and Receiver Dynamic Range ................................ 8
Table 1. System Dynamic Range, Options 200 or 400, and Receiver Dynamic Range, All
Options .............................................................................................................. 9
Table 2a. System Dynamic Range at Test Port (dB), Options 200 or 400 .10
Table 2b. System Dynamic Range at Test Port (dB), Options 219 or 419 11
Table 2c. System Dynamic Range at Test Port (dB), Option 224 ...............12
Table 2d. System Dynamic Range at Test Port (dB), Options 224 or 423 13
Table 2e. System Dynamic Range at Test Port (dB), Options 224 or 423 with 0291 14
Table 3a. Extended Dynamic Range at Direct Receiver Access Input (dB) - Specification
.........................................................................................................................15
Table 3b. Extended Dynamic Range at Direct Receiver Access Input (dB), Options 224 or
423 ..................................................................................................................16
Table 3c. Extended Dynamic Range at Direct Receiver Input (dB),Options 224 or 423 with
0291 .................................................................................................................17
N5244A and N5245A Corrected System Performance, All Options ...........18
Table 4. 85056A Calibration Kit ....................................................................18
Table 5. N4693A 2-Port Electronic Calibration Module .............................20
Uncorrected System Performance .................................................................22
Table 6a. Directivity, All Options, All Ports (dB) ...........................................22
Table 6b. Source Match (dB) .........................................................................23
Table 6c. Load Match (dB) .............................................................................24
Table 6d. Reflection /Transmission Tracking, Crosstalk (dB), All Options,All Ports-Typical
.........................................................................................................................24
Table 6e. Noise Mode1 Uncorrected System Performance (dB), Option 029 - Specification
.........................................................................................................................25
Table 6f. Noise Mode1 Uncorrected System Performance (dB), Option 029 - Typical 25
Test Port Output ..............................................................................................26
Table 7. Frequency Information, All Options................................................26
Table 8a. Maximum Leveled Power (dBm), Options 200 or 400 ................27
Table 8b. Maximum Leveled Power (dBm), Options 219 or 419 ................28
Table 8c. Maximum Leveled Power (dBm), Options 224 or 423 ................29
3
Table 8d. Maximum Leveled Power (dBm), Options 224 or 423, Combine Mode - Typical
.........................................................................................................................30
Table 8e. Maximum Leveled Power (dBm), Option 224 ..............................31
Table 8f. Maximum Leveled Power (dBm), Options 224 or 423 with 0291 32
Table 8g. Maximum Leveled Power (dBm), Options 224 or 423 with 0291, Combine Mode-
Typical .............................................................................................................33
Table 8h. Maximum Leveled Power (dBm), Noise Mode1, Options 224 or 423 with 0291 -
Typical .............................................................................................................34
Table 9. Power Level Accuracy (dB) at Nominal Power1, All Options ........35
Table 10a. Power Level Linearity1 (dB), All Options - Specification ...........35
Table 10b. Power Level Linearity1 (dB), All Options - Specification...........35
Table 10c. Power Level Linearity1 (dB), Option 224 - Specification ..........36
Table 11a. Power Sweep Range (dB), Options 200 or 400 ........................36
Table 11b. Power Sweep Range (dB), Options 219 or 419 ........................37
Table 11c. Power Sweep Range (dB), Options 224 or 423 ........................38
Table 11d. Power Sweep Range (dB), Option 224 ......................................39
Table 11e. Power Sweep Range (dB), Options 224 or 423 with 0291 .......40
Table 12. Nominal Power (Preset Power, dBm)...........................................40
Table 13. Power Resolution and Maximum/Minimum Settable Power, All Ports1 41
Table 14. 2 and 3 Harmonics at Max Specified Power (dBc), All Options - Typical 41
nd rd
Table 15. Non-Harmonic Spurs at Nominal Power (dBc), All Options - Typical 41
Table 16. Phase Noise (dBc/Hz), All Options, All Ports - Typical ...............42
Test Port Input .................................................................................................43
Table 17. Noise Floor1 (dBm) @ 10 Hz IFBW, All Options, All Ports .........43
Table 18. 0.1 dB Compression at Test Port (dBm), All Options, All Ports - Typical 43
Table 19. Receiver Compression Test Port Power1 (dBm), All Ports - Specification 44
Table 20a. Trace Noise1 Magnitude (dB rms), All Options, All Ports .........44
Table 20b. Trace Noise1 Phase (deg rms), All Options, All Ports ...............45
Table 21. Reference Level - Specification....................................................45
Table 22. Stability1 - Typical ..........................................................................45
Table 23. Damage Input Level - Specification .............................................46
Noise Receiver Input (Option 029 only) .........................................................47
Table 24. Noise Receiver Bandwidth ...........................................................47
Table 25. Receiver Noise Figure (dB), Port 2, at 4 MHz BW, High Gain Setting 47
Table 26. Noise Figure Trace Noise1 (dB rms) at 4 MHz BW, All Gain Settings 47
4
Table 27. Noise Receiver Linearity (dB) at 4 MHz BW - Specification .....47
Table 28. Noise Receiver Input Range - Specification ..............................48
Dynamic Accuracy ...........................................................................................49
Table 29. Dynamic Accuracy - Specification ...............................................49
General Information.........................................................................................54
Table 31. Miscellaneous Information............................................................54
Table 32. Front Panel Information, All Options ............................................54
Table 32. (Continued) Front Panel Information, All Options .......................55
Table 33. Rear Panel Information, All Options .............................................55
Table 33. (Continued) Rear Panel Information, All Options ........................55
Table 33. (Continued) Rear Panel Information, All Options ........................57
Table 33. (Continued) Rear Panel Information, All Options ........................58
Table 34. Analyzer Dimensions and Weight .................................................59
Regulatory and Environmental Information .................................................59
Measurement Throughput Summary .............................................................60
Table 35a. Cycle Time (ms) for Measurement Completion, All Models, All Options - Typical
.........................................................................................................................60
Table 35b. N5244A Cycle Time (ms) for Full-Span Measurement Completion - Typical
.........................................................................................................................61
Table 35c. N5245A Cycle Time (ms) for Full-Span Measurement Completion - Typical
.........................................................................................................................61
Table 36. Cycle Time vs. IF Bandwidth - Typical .........................................62
Table 37. Cycle Time (ms) vs. Number of Points - Typical..........................63
Table 38. Data Transfer Time1 (ms) - Typical ...............................................64
Front-Panel Jumpers ......................................................................................65
Table 39. Measurement Receiver Inputs (dBm) - Typical...........................65
Table 40a. Reference Receiver Inputs and Reference Source Outputs (dBm) - Typical
.........................................................................................................................66
Table 40b. Reference Receiver Inputs and Reference Source Outputs (dBm) - Typical
.........................................................................................................................67
Table 40c. Reference Receiver Inputs and Reference Source Outputs (dBm) - Typical
.........................................................................................................................68
Table 41a. Source Outputs (dBm) - Typical .................................................69
Table 41b. Source Outputs (dBm) - Typical.................................................70
Table 42. Coupler Inputs (dB) - Typical ........................................................71
5
Table 43. Damage Level - Typical .................................................................71
Test Set Block Diagrams .................................................................................72
Figure 1. 2-Port N5244A and N5245A Base Unit Option 200 ...................72
Figure 2. 2-Port N5244A and N5245A Option 219.....................................73
Figure 3. 2-Port N5244A and N5245A Option 224.....................................73
Figure 4. 2-Port N5244A and N5245A Option 224 with 029 .....................74
Figure 5. 4-Port N5244A and N5245A Base Unit - Option 400 ................75
Figure 6. 4-Port N5244A and N5245A Option 419.....................................75
Figure 7. 4-Port N5244A and N5245A Option 423.....................................76
Figure 8. 4-Port N5244A and N5245A Option 423 with 029 .....................76
Figure 9. Receiver Block Diagram ................................................................77
This is a complete list of the technical specifications for the N5244A and N5245A with the following
options:
Option 029, adds hardware and firmware for high-accuracy noise figure measurements. It requires one of
Option 224 or 423. See the block diagram.
Option 200, 2-port standard test set (includes six front-panel access loops) and power range. See the block
diagram.
Option 219, adds 2-port extended power range, source and receiver attenuators, and bias-tees (requires
Option 200). See the block diagram.
Option 224, adds an internal second source, a combiner, and mechanical switches to the 2-port analyzer
(requires Option 200, 219, and 080). See the block diagram.
Option 400, 4-port standard test set (includes twelve front-panel access loops), power range, and an internal
second source (Option 080 recommended). See the block diagram.
Option 419, adds 4-port extended power range, source and receiver attenuators, and bias-tees (requires
Option 400). See the block diagram.
Option 423, adds an internal combiner, and mechanical switches to the 4-port analyzer (requires Option 400,
419, and 080). See the block diagram.
Notes
Specifications for the N5244AS and N5245AS Option H85, when configured in standard configuration, are
the same as those of closest N5244A and N5245A option configuration.
The Corrected System Performance with Cal Kits and Dynamic Accuracy Charts apply ONLY to
N5244A/45A models with serial numbers starting with MY5244/45, SG5244/45, and US5244/45, and
above. This document provides technical specifications for the 85056A calibration kit, and the N4693A 2-
Port ECal module. Please download our free Uncertainty Calculator from
http://www.keysight.com/find/na_calculator to generate the curves for your calibration kit and PNA setup.
For all tables in this data sheet, the specified performance at the exact frequency of a break is the degraded
value of the two specifications at that frequency.
6
Definitions
All specifications and characteristics apply over a 25