Text preview for : Kyocera FS-1000 Plus Service Manual.pdf part of Kyocera Kyocera FS-1000 Plus Service Manual Kyocera Kyocera FS-1000 Plus Service Manual.pdf
Back to : Kyocera FS-1000 Plus Serv | Home
Page printers
FS-1000/1000+ Series Combined Service Manual
C Kyocera Corporation 2001 All rights reserved. Export Edition
Notice residential installation. This is connected.
The information in this equipment generates, uses, Consult the dealer or an
manual is subject to change and can radiate radio experienced radio/TV
without notification. frequency energy and, if not technician for help.
Additional pages may be installed and used in Changes or modifications not
inserted in future editions. The accordance with the expressly approved by the
reader is asked to excuse any instructions, may cause manufacturer for compliance
technical inaccuracies or harmful interference to radio could void the user's authority
typographical errors in the communications. However, to operate the equipment.
present edition. there is no guarantee that
No responsibility is assumed interference will not occur in Important notice to
if accidents occur while the a particular installation. If this service person
service person is following the equipment does cause harmful Before attempting service on
instructions in this manual. interference to radio or the equipment, including
The contents of this manual television reception, which disassembling, reassembling,
are protected by copyright. No can be determined by turning troubleshooting, and
part of the manual may be the equipment off and on, the adjustment, read this manual
reproduced or copied by any user is encouraged to try to carefully. During performing
means without the permission correct the interference by one service, use extreme care to
of the copyright holder. or more of the following avoid possible electric shock
measures. hazard, burn, and human
Information Reorient or relocate the injuries. Make sure the printer
This equipment has been receiving antenna. is not provided with any safety
tested and found to comply Increase the separation facilities other than those
with the limits for a Class B between the equipment and primarily intended for the
digital device, pursuant to Part receiver. safety of users.
15 of the FCC Rules. These Connect the equipment into an
limits are designed to provide outlet on a circuit different
reasonable protection against from that to which the receiver
harmful interference in a
FS-1000/FS-1000+
About the chapters
This manual contains informations pertaining to service and maintenance of the laser printers FS-
1000/1000+. This manual contains the following chapters:
Chapter 1: Product Information
Chapter 2: Installation/Operation
Chapter 3: Maintenance/Adjustments
Chapter 4: Operation Overview
Chapter 5: Disassembly Contents
Chapter 6: Troubleshooting
Appendix A: Diagrams
Appendix B: Status Page
Appendix C: Interface
Contents
Contents
FS-1000/FS-1000+
REVISION HISTORY
Version Date Replaced Pages Remarks
1.00 10-May-2000 -
1.0A 25-May-2000 2-10, 3-7, 3-10, 4-5,
4-6, 4-9, 4-11, 4-21,
4-24, 5-25, 5-26, 6-9,
6-10, 6-11, A-8, B-6
1.0B 14-July-2000 5-31
2.00 1-Feb-2001 Overall revision Combined with FS-1000+ model
TO OBTAIN THE LATEST PRINTER DRIVERS AND UTILITIES, VISIT US AT OUR INTERNET HOME
PAGE: http://www.kyocera.com/w2k
FS-1000/FS-1000+
Chapter 1 Product Information
Chapter 1 Contents
1-1 Printer specifications ...................................................................................................................... 1-3
1-1-1 Specifications ............................................................................................................................ 1-3
(1) Engine ................................................................................................................................. 1-3
(2) Controller ............................................................................................................................. 1-4
(3) Weight and dimensions ....................................................................................................... 1-4
(4) Power requirements ............................................................................................................ 1-5
(5) Environmental requirements ............................................................................................... 1-5
1-2 Names of parts ................................................................................................................................. 1-6
1-2-1 Name of parts ............................................................................................................................ 1-6
1-3 Safety information ........................................................................................................................... 1-7
1-3-1 Safety information ...................................................................................................................... 1-7
(1) Laser safety ......................................................................................................................... 1-7
(2) Laser notice ......................................................................................................................... 1-7
(3) Laser caution label on the scanner unit ............................................................................... 1-7
(4) CDRH regulations (U.S.A.) .................................................................................................. 1-9
(5) Ozone concentration ........................................................................................................... 1-9
(6) FCC statement (U.S.A.) ...................................................................................................... 1-9
(7) Optional equipment ........................................................................................................... 1-10
(8) Important note on the interface connectors ....................................................................... 1-10
(9) Canadian Department of Communications compliance statement ................................... 1-10
(10) Avis de conformit